Enota obračanja plovila

DUMETA D-CHGK-5-DPU

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice Gijdpod Du T Ijfx Af Ser • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Gedpfjqt Dmyjx Af Sjir According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Gisdpferah S Hox Af Sjr Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Gisdpfsfxgp Uex Af Ser Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler Giedpfxsqnt N De Af Sor

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Gedpjg U Uv Rofx Af Ssir Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- Gjdshpktvepfx Af Soir The machine is delivered fully assembled and ready for immediate operation.

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: xxxx, High-Performance Bench Thread Tapping Machines on T-Slot Table Technical Data: - Thread tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (pivot radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vice with jaw width 200 mm Godpfxof Tcy Do Af Seir - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Gsdpfeuddcaox Af Seir Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections.

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Gedjilg Hdepfx Af Ssir Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual