CNC stružnica

DOOSAN Puma 2600

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 105 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.163 mm, skupna širina: 2.005 mm, skupna masa: 7.500 kg, največja dolžina izdelka: 4.438 mm, število osi: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine is equipped with a 12-station turret, a tailstock with tailstock drive, and a steady rest with a diameter range of 40 mm to 200 mm. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN Puma 2600 LYB II we have available for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over carriage: 630 mm • Recommended turning diameter: 315 mm • Maximum turning diameter: 376 mm • Maximum turning length: 1,350 mm • Bar capacity: 102–103 mm • Main spindle • Spindle nose: ASA A2-11 • Bearing diameter: 160 mm • Spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Driven tool speed: 5,000 rpm • Axes: • C-axis rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Rotating tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill stroke: 100 mm • Motors / Power Hnjdpfx Abeytt A Rjxon • Driven tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical power: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, diameter range 40–200 mm • Three powered radial Eppinger chucks/spindles • Tool presetting system (tool presetter) Technical Specification Counter spindle: No Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref.-št.: 10615 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2011 Tip krmiljenja: CNC-krmiljenje Krmiljenje: Heidenhain ITNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 128/XXXX X-hod: 1800 mm Y-hod: 2100 mm Z-hod: 1250 mm Zasukalni razpon: -30 / +180 ° Obremenitev mize: 10000 kg Največji premer vrtljive mize: 1700 Ø Območje vrt. hitrosti mize: 12 min/-1 Vpenjalo orodja: HSK 63 Število mest za orodje v magazinu: 60 Vretenaste hitrosti – brezstopenjsko: 24.000 U/min Pribl. teža stroja: 41 t Hnjdjy H Epwspfx Abxsn Vreteno: 24000 U/min Pogon za podajalno os A, C: 30 min/-1 Horizontalna glava: 130-1.380 mm Vertikalna glava: 230-1.480 mm Dodatne informacije: Stroj si je mogoče ogledati pod napetostjo.

Stanje: dober (rabljeno), Leto izdelave: 2016, največja hitrost vretena: 3.500 obr/min, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Glavni parametri: Krmilnik: FANUC 0iD/31iA Vpenjalna glava: SAMCHULLY 10" Vretenska odprtina: 86 mm S cevjo za zaščito: 78 mm Revolverska glava: 12 glavnih in 12 sekundarnih pozicij, priklop BMT65 Programabilna hidravlična konica: MT5 Moč glavnega vretena: 22 kW S1max=3500 1/min Moč pogonjenih orodij: 5,5 kW S2max=5000 1/min X-os gib: 260 mm Z-os gib: 830 mm Y-os gib: ±52 mm (104 mm) C-os Hnedpfx Abswtg Inexsn Maksimalna dolžina struženja: L=760 mm Največji premer struženja: D=376 mm Hitri pomik: 30 m/min Avtomatsko merjenje orodja s sondo Teža: 6000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 953 h, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.350 mm, moč vretenovega motorja: 22.000 W, proizvajalec krmilnikov: FANUC, model krmilnika: i-series, število mest v zalogovniku orodij: 12, število osi: 2, Horizontal lathe from 2011. The DOOSAN Puma 2600L offers a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It features a robust spindle speed of up to 2,800 rpm and a 12-position turret. If you are looking for a high-quality lathe, consider the DOOSAN Puma 2600L, which we have available for sale. Contact us for further details. • Capacity and Reach • Maximum turning diameter: ø 481 mm • Maximum turning length: 1,280–1,310 mm (depending on chuck) • Swing over bed: ø 780 mm • Bar capacity: ø 76 mm • Main Spindle • Chuck diameter (face plate): 254 mm (10") • Spindle bore: ø 86 mm • Spindle nose: A2-8 Hodpfx Abjy T Ndfexonn • Tool Changer • Turret: 12 stations • Rapid traverse (X/Z): 30 m/min Additional Equipment • Note: Tools are not included (available at extra cost) Technical Specification Counter spindle: No Driven tools: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 35.598 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07400004031, moč vretenovega motorja: 20 W, hitrost vretena (min.): 3.250 obr/min, največja hitrost vretena: 5.000 obr/min, prehod palice: 90 mm, skupna masa: 10.000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - controllo Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - attrezzatura eccezionale - alimentatore di barre LNS Sprint S2. Hnsdsuyx Hzjpfx Abxsn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, CNC stružnica DOOSAN Puma 2600SY II s Siemens krmiljenjem; termični senzorji za najvišjo natančnost; Y-os; protivreteno s vpenjalnim tuležem; premer prehoda vretena 80 mm (glavno vreteno); vse osi s prizemnim vodilom – primerno tudi za težko obdelavo; transporter ostružkov, nastavljalec orodij, lovilec delov s trakom, hladilna pištola, odsesavanje; visokotlačna hladilna enota 70 bar; različni fiksni in pogonski nosilci orodja; Na zahtevo z robotskim nalaganjem Halter! Priložil sem fotografijo. Možna je naknadna namestitev avtomatskih vrat. V Nemčiji po želji z vključitvijo popolnega zagona. Vse za doplačilo! Hjdpfjy R S Uzsx Abxenn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 105 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 22.000 W, skupna višina: 1.915 mm, skupna širina: 1.985 mm, skupna masa: 6.550 kg, proizvajalec krmilnikov: SIEMENS, največja dolžina izdelka: 3.857 mm, število osi: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station turret and driven tools, offering versatile machining capabilities. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN PUMA 2600 SY II that we have available for sale. Contact us for further details. • Siemens S828D control with touchscreen and 15" ShopTurn display • 6-axis configuration with driven tools, Y-axis and sub spindle • Main and sub spindle with integrated motor spindle technology • Cylindrical roller bearings, accuracy class P4, lifetime lubrication • Main spindle chuck diameter: 255 mm • Sub spindle chuck diameter: 175 mm • Hydraulic hollow clamping system • Hollow clamping cylinder • 24-position turret (BMT65P interface) • Automatic tool setting arm, electric swivel • Dynamic spindle speed control • Sub spindle with tailstock function • Coolant flow max. 448 l/min • Oil flow 336 l/min • Electronic safety clutch for X and Z axes • Swing over bed: 780 mm • Swing over cross slide: 630 mm • Max. turning diameter: 255 mm • Max. turning length: 760 mm • Bar capacity: 76 mm • Max. workpiece weight including chuck: 250 kg • Main spindle bore: 91 mm • Max. torque: approx. 706 Nm • Sub spindle bore: 52 mm • Spindle speed up to 6000 rpm • Motor power: approx. 18.5 kW Hodpsy E Izajfx Abxonn • Torque: approx. 118 Nm • Main spindle C-axis: 360° resolution 0.001°, speed 200 rpm, torque approx. 1508 Nm • Sub spindle C-axis: 360° resolution 0.001°, speed 200 rpm, torque approx. 121 Nm • Turret: 12 driven tool positions out of 24 • Max. speed of driven tools: 5000 rpm • Driven tool power: approx. 7.5 kW • Driven tool torque: approx. 50 Nm • Rapid traverse X and Z: approx. 30 m/min; Y: approx. 10 m/min • Bed inclination: 30° • Coolant tank capacity: approx. 220 liters • Coolant pump pressure: 7 bar • Hydraulic tank: approx. 20 liters • Automatic central lubrication system • Electrical connection: AC 380 V, 3-phase, 50/60 Hz • Total connected load: approx. 69.27 kVA • The machine has never been used (as new condition) Additional Equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction unit • Boring bar holder, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Set of reduction sleeves: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • Reduction sleeves for U-drills: 40/20, 40/25, 40/32 • Two Eppinger driven toolholders BMT65P, straight, with external cooling Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Hnjdpfx Abeifn N Noxsn Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, 1000 mm zamah, 760 mm največji obdelovalni premer, 1540 mm največja stružna dolžina, glavno vreteno 4000 o/min, premer palice 76 mm, rezkanje 12.000 o/min, 18,5 kW, C-os z natančnostjo 0,001 stopinje, Y-os -/+115 mm, 40-postajni avtomatski menjalnik orodij (ATC), 12-postajni spodnji revolver, hitrost rezkanja 4.000 o/min, vretenski motorji 22 kW, krmilje FANUC 31i, trivaljna hidravlična vpenjalna glava, transporter odrezkov, hladilni sistem. Hnedpfx Aow I Tniebxon

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, stružna dolžina: 760 mm, premer struženja: 376 mm, izvrtina vretena: 92 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 20 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 105 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 15 W, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 2.163 mm, skupna dolžina: 3.560 mm, skupna širina: 1.945 mm, premer struženja nad ležiščem sani: 780 mm, skupna masa: 6.550 kg, prehod palice: 81 mm, Oprema: dokumentacija / priročnik, Ponujam CNC stružnico Doosan Puma 2600 SY II, visoko zmogljiv stroj z osjo Y, glavnim vretenom in protivretenom, idealen za celotne obdelave v enem vpenjanju. Stroj je opremljen s podajalnikom palic in številnimi dodatki, v popolnoma delujočem stanju in si ga je možno ogledati v delovanju po dogovoru. Stružnica je v odličnem delovnem stanju, redno vzdrževana in je na voljo za ogled v delovanju brez obdelovanca po dogovoru. Vključeni dodatki: - Podajalnik palic Top Automazioni model X-Files S380SX - Transporter za odrezke Hsdpfxsymdt Ts Abxjnn - Sistem za prednastavitev orodij - Vpenjalne glave Bellegrandi na vretenu in protivretenu - Roka za pobiranje kosov s transportnim trakom - Statična in gnana orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min Hedpfox D Irmex Abxenn • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, CNC stružnica DOOSAN Puma 2600SY II s Siemens krmiljenjem; termosenzorji za najvišjo natančnost; Y-os; protivreteno s vpenjalnim kleščnim vpenjalom; premer skozi vreteno 80 mm (glavno vreteno); vse osi so ravninsko vodene - primerno tudi za težko obdelavo; transporter za odrezke, nastavitveni merilnik orodja, zbirnik delov s trakom, hladilna pištola, odsesavanje; 70 bar visokotlačni hladilni sistem; različni fiksni in gnani držaji orodij; Hsdoy Amflepfx Abxonn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 53 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 33.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 828D, število osi: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. The machine is ideal for complex machining tasks, ensuring robust performance and durability. If you are looking for high-quality turning capabilities, you should consider the DOOSAN Puma 2600 SY II that we have for sale. Contact us for further information. Additional Equipment • Mekiload gantry loader • Renishaw Equator • Renishaw Equator • The machine comes with a rotary indexing magazine • The machine is equipped with a portal robot Advantages of the Machine Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Spindle nose (main spindle): A2-8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW Hnsdpfx Aoyr R A Ejbxen • Sub spindle torque: 220 Nm • Spindle nose (sub): A2-5 • Number of stations: 24 (12 driven) Additional Information Machine is still under power

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA Hedpfx Abjxf Hqqsxjnn EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 760 mm, premer struženja: 376 mm, največja hitrost vretena: 3.500 obr/min, premer tulec: 78 mm, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Glavni parametri: Krmilnik: FANUC 0iD/31iA Vpenjalna glava: SAMCHULLY 10" Hnedpfxsykikxj Abxen Vretenska odprtina: 86 mm S cevjo za zaščito: 78 mm Revolverska glava: 12 glavnih in 12 sekundarnih pozicij, priklop BMT65 Programabilna hidravlična konica: MT5 Moč glavnega vretena: 22 kW S1max=3500 1/min Moč pogonjenih orodij: 5,5 kW S2max=5000 1/min X-os gib: 260 mm Z-os gib: 830 mm Y-os gib: ±52 mm (104 mm) C-os Maksimalna dolžina struženja: L=760 mm Največji premer struženja: D=376 mm Hitri pomik: 30 m/min Avtomatsko merjenje orodja s sondo Teža: 6000 kg