CNC stružno-rezkalni center

DOOSAN PUMA 2600Y

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door Klodpfx Asww Nazoacsn - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, INDEX MS22-8 Kedpfx Aewt Unvsacjln Izdelano 2021 (v obratovanju od 2022) Dvojni NCU (2) sinhrona vretena Samodejni podajalnik palic MBL, dolžina 3,3 metra Ocenjene delovne ure: 10.000 Za celotne tehnične specifikacije nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Kjdpfxsw Tg Adj Aacsln Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m Klodpfx Astzdyzoacen O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Kedpexmhdnofx Aacsln Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor Kodpfx Asuhazgoacoln - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 671 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 550 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC7, teža obdelovanca (maks.): 1.100 kg, širina mize: 800 mm, dolžina mize: 616 mm, vrtljajska hitrost (min.): 20 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Heidenhain TNC7 Vreteno HSK-A63 16000 min-1 30 mest za orodja Toga vpenjalna miza 800x616 Notranji dovod hladilne tekočine 40 bar s papirnim tračnim filtrom Strgalačni transporter Ročni kolešček BLUM LC53-Digilog - prelom/merjenje orodja Kledpfxsyf E Ate Aacon Merilna tipalka BLUM TC Stroj VKLOP: 671 h, vreteno VKLOP: 61 h Stroj je star približno 6 mesecev. Prodaja po naročilu stranke. Ogled možen po predhodnem dogovoru.

Stanje: rabljeno, Leto izdelave: 2005, Stružnica Mazak QTN 200, letnik 2005 Mazatrol 640T Vpenjalna glava 210 mm Kitagawa BB 208 Ksdpfxoxgpqps Aacoln Vretena premer 65 mm Dolžina struženja 500 mm Premer struženja 380 mm Konjiček Sonda za orodje

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Kedpfx Aorairwoaceln Technical data, accessories and machine description are non-binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 8.185 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis DMG DMU 60 evo Linear machining center was manufactured in 2013, featuring travels of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a 60-position tool magazine. It is equipped with a Heidenhain iTNC 530 control unit, internal coolant supply at 40 bar, and a chip conveyor with hinged belt. Ideal for complex machining tasks. Contact us for more information about this machine. • Tool magazine: 60 positions • Rapid traverse: 80 m/min • Dynamic package • Internal coolant: 40 bar • Swiveling observation window • Bed flushing system with rinse gun • Operating hours: 14,471 h • Spindle hours: 8,185 h Klsdpfx Aex D Dyajacjn Additional equipment • Hinged belt chip conveyor • Paper band filter, 600 liters • Oil and emulsion mist separator • Heidenhain TS 649 touch probe • 3D quickSET tool kit Technical Specification Tool taper: HSK 63