Visokohitrostni radialni vrtalni stroj

DONAU Danumeric 440

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Bedpfxeu Aa I Sj Afneld Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Bljdpfjwbhipjx Afnjd

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Blodpfxou Dg D As Afnsd Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Bsdjrmkfnspfx Afnsld Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.100 mm, moč: 46 kW (62,54 KM), razdalja med središči: 2.000 mm, delovne ure: 1.200 h, Na voljo je stružnica DMT CD1100 z upravljalnikom Heidenhain in samo 1200 delovnimi urami. Območje obdelave zajema premer vrtenja okoli 1100 mm nad ležiščem in okoli 800 mm nad planskim suportom. Nosilec za orodja je Multifix D1. Razdalja med konicama znaša 2000 mm. Glavni pogon vretena je motor z močjo 46 kW pri 60 % ED s dvema prestavnima stopnjama. Konjiček: - Premer pinole: 125 mm Bodpfx Aoxlza Hjfneld - Stožčasta nastavitev: 6 Mk Dobava: Osebni prevzem Plačilo: 100 % pred prevzemom z bančnim nakazilom takoj po izdanem računu Vsi podatki so nezavezujoči, vmesna prodaja pridržana. Stroj se prodaja brez garancije in ostane v naši lasti do popolnega plačila.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp Bljdpjvv Spkofx Afnjd • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Model: Amada HFE M2 220t 4m, 8-osna hidravlična upogibna stiskalnica Bsdsv S U Izspfx Afnold Letnik: 2012 Tonska moč: 220 ton Največja dolžina upogiba: 4280 mm Dolžina hoda: 200 mm Hitrost približevanja: 1 – 100 mm/s Hitrost upogibanja: 1 – 10 mm/s Hitrost vračanja: 1 – 100 mm/s Kapaciteta olja: 195 l Moč motorja: Teža: 17.450 kg Dimenzije: Dolžina stroja: 5070 mm Globina stroja: 2075 mm Višina stroja: 3085 mm Razdalja med stranskima okvirjema: 3760 mm Širina prečke: 180 mm Višina mize: 960 mm Odprtina (svetel odprt): 470 mm Globina grla: 420 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) Blsdpfxotwliwo Afnsd The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: zelo dobro (rabljeno), Dvojno vreteno, Y-os, C-os Krmilnik FANUC 18i-TB Premer struženja: 250 mm Dolžina struženja: 555 mm Premer vpenjalne glave: 165 mm Hitrosti glavnega vretena: 50–4.500 obr./min Hitrosti protivretena: 5.000 obr./min Blsdpfx Asx A Eupsfned Revolverska glava 1+2: 24 postaj, vsaka s 12 pogonskimi pozicijami Naprava za prednastavitev orodja Podajalnik palic Naprava za izmet delov Razna dodatna oprema MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, 1 ks Rovinná bruska Model: FS 640 SC s řízením Fagor Výrobce: Geibel & Hotz Rok výroby: 2010 Technické údaje Pracovní oblast: Oblast broušení - Maximální brousicí oblast: 600 x 450 mm Bljdpfx Ajx Dgvqjfnod - Standardní rozměr magnetické desky: 600 x 400 mm - Upínací plocha stůl – střed vřetene: 140 – 525 mm - Brousicí kotouč (standard): 300 x 50 x 76,2 mm - Zatížení stolu vč. magnetu: 600 kg - Výkon motoru brousicí vřetene: cca 3,7 kW - Celkový příkon: cca 11 kW - Rychlost stolu: 2–28 m/min - Příčný/svislý posuv: 100–1000 mm/min Zástavbová plocha: 3,95 x 3,16 x 2,47 m Hmotnost stroje cca: 2,1 t Vybavení Specifické příslušenství stroje, pásový filtr, magnetický separátor, odsávání Magnetická upínací deska s regulací přítlaku, automatické orovnávání vč. kompenzace, orovnávací diamant, vyvažovačka, upínací zařízení, 4 brousicí kotouče Technické údaje bez záruky.