Donau Danumeric 440 nakup rabljenega (56)

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Bdsdpjyrdc Ssfx Altsf Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots on the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travels Tool holder type SK 40 Column diameter 195 mm Table dimensions 1800 x 600 mm Number of T-slots 4 T-slot spacing 125 mm Quill travel (Z-axis) 200 mm Column travel (W-axis) 410 mm Distance spindle nose to table top (min.) 70 mm Distance spindle nose to table top (max.) 680 mm Distance spindle nose to floor (min.) 970 mm Distance spindle nose to floor (max.) 1580 mm Drilling radius 540 – 1590 mm Working table height 900 mm Machining Capacities Drilling capacity full material St 60: Ø 40 mm GG 22: Ø 50 mm Thread cutting St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range 15 – 2800 rpm Torque up to 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis AC servo motor 0.25 kW Y-axis AC servo motor 0.25 kW Z-axis AC servo motor 4.50 kW W-axis AC servo motor 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless 5 – 2000 mm/min Precision Positioning accuracy X/Y-axis over 1200 mm ± 0.075 mm Electrical Data Operating voltage/frequency 400V / 50Hz Control voltage 24V Hydraulic unit for clamping 0.75 kW Total connected load 13.0 kVA Bdsdpfxoyxw Dde Altof Weight Danumeric 440 (without packaging) with 1800 x 600 mm table 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, back-lit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Unit of measurement: mm or inch, also in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining Cycles Standard software options: dialog programming, 38 zero point shifts, rotate and mirror, Teach-In for X, Y, Z, program restart with selectable entry options Zero point determination: cycles for determining zero points by manual touch probe for: - arbitrarily fixtured rectangular parts - arbitrarily fixtured round parts - alignment of cast or flame-cut parts - angle determination on round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Bsdpfx Aloy Tn Ntstjdf

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Bdsdpfx Alsu Aa I Sjtef Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: Bjdpfeu Dg D Aex Altedf • USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Bdedpfxermkfne Altjf Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Bdsdpsvv Spksfx Altsf Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Kapaciteta vrtanja St 60/GG 22: 40/50 mm Rezanje navojev St 60/GG 22: M 36/M 45 Vpenjalna površina mize: 600 x 1800 mm Višinsko nastavljanje izravnalnika: 450 mm Majhen/velik radij vrtanja: 305/1305 mm Bdjdpfx Aey I Ua Ijltof Vretenski nosilec: SK 40 Hod pinole: 200 mm Brezstopenjske vrtljaje vretena: 15 - 2800 obr/min Brezstopenjski podajalci: 5 - 2000 mm/min Pogon vretena, frekvenčno krmiljen: 5,5 kW Električni priklop: 400 V, 14 kVA Teža: 3400 kg Potreben prostor: 3800 x 2000 x 2500 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor Bsdexn A Spjpfx Altedf • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1050 mm Spindle speed: 15 - 2800 rpm Feed range: 0.075 - 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Bodpfxoy Nd T Hs Altodf Weight: 1500 kg Equipment: - Machine in top condition - Serviced and overhauled by factory service in 2026 Machine design: • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 18 mm T-slots at the rear of the machine base • 2 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travel distances: Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min. table top: 70 mm Max. table top: 680 mm Distance spindle nose – min. floor: 970 mm Max. floor: 1580 mm Drilling radius: 540 - 1590 mm Working table height: 900 mm Machining data: Drilling capacity, full material: Steel St 60 – Ø 40 mm Cast Iron GG 22 – Ø 50 mm Thread cutting: Steel St 60 – M36 Cast Iron GG 22 – M42 Main spindle drive: AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm, constant from 15 – 2000 rpm Feed drives: X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless: 5 – 2000 mm/min Accuracy: Positioning accuracy X/Y axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging, with table 1800 x 600 mm): 2800 kg CNC control: Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental units, unit in mm or inch as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subroutine technology: yes Standard software options: conversational programming, 38 zero point offsets, rotation and mirroring, Teach-In for X, Y, Z, restart in the program with selectable entry functions Zero point determination: cycles for determining zero points by manually probing the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges/surfaces Test-graphic: graphical display of drilling patterns

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Bdodpfxsy Ri H Is Altof

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 1.050 mm, dolžina podajanja os Z: 200 mm, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance Spindle Nose – Table Top (min./max. mm): 140 / 740 Drilling Radius (min./max. mm): 540 / 1590 Travel U-Axis (mm): 2600 Travel Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Capabilities Drilling Capacity (solid material): St 60: 40 mm / GG 22: 50 mm Thread Cutting: St 60: M36 / GG 22: M42 Main Spindle Drive AC Motor, frequency controlled: 5.5 kW at 100% ED Speed Range (rpm): 15 - 2800 Max. Torque (Nm): 250 Constant torque from (rpm): 15 – 200 Feed Drives X-Axis – AC Servo Motor: 0.25 kW Y-Axis – AC Servo Motor: 0.25 kW Z-Axis – AC Servo Motor: 4.50 kW W-Axis – AC Servo Motor: 2.50 kW U-Axis – AC Servo Motor: 2.50 kW Rapid Traverse Speed (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid Traverse Speed (U/W) (m/min): 7.5 / 3 Infinitely variable feeds (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X-, Y-Axis over 1200 mm (mm): ± 0.075 Repeatability X-, Y-Axis (mm): ± 0.03 Positioning Accuracy Z-Axis (mm): ± 0.05 Repeatability Z-Axis (mm): ± 0.03 Positioning Accuracy W-Axis (mm): ± 0.05 Repeatability W-Axis (mm): ± 0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, clearly visible from all angles Bodpfx Aoy Ttrteltsdf Position Display: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, suggests suitable tools by machining operation, cutting data recommendations based on material Tool Management: up to 500 tools Subprograms: Yes Machining Cycles: Centering, drilling, tapping, reaming, countersinking, boring, custom cycle for special tools, dwell time possible in any cycle Chip Breaking / Deburring: possible in drilling cycle Hole Patterns: Linear array, hole circle, matrix Base Software: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable re-entry points Zero Point Determination: Cycles to determine zero points by manual probing for: - Randomly clamped right-angle parts - Randomly clamped round parts - Alignment of cast and flame-cut parts - Angle positioning for round parts by touching reference edges/surfaces Data Interfaces Paintwork with signs of use Standard paint, two-component textured finish Machine upper part: light grey RAL 7035 Machine base: light blue, RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection protocol for mechanics, electrics, and safety features

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1983, Work table 600mm x 1200mm Bsdpfxomt Ed Rs Altjdf Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping unit Coolant system Electrics 24V control voltage Emergency stop, dual-channel Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035/7031

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1976, Work table: 500 mm x 1200 mm Bedpfx Aljwnn S Rstsdf Arm travel: 600 mm Tool holder: Morse taper 4 (MT 4) Drilling capacity: 32 mm in steel Tapping device Coolant system Electrics: 24V control voltage Two-channel emergency stop Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035 / 7031

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Bodpfx Ajv If T Tjltodf Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: Bjdpfx Alot Hwwqstsdf - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Bdsdpfx Alst Hxagjtsf Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, CNC vrtalno-rezkalni center Donau DANUSYS 2910, letnik 2002, obnovljen Tehnični podatki: Krmiljenje Heidenhain iTNC 530 Pomiki osi X, Y in Z: 2900 / 1000 / 700 mm Rezkanje St 60: 300 cm³/min Vrtanje v poln material St. 60: ø 40 mm Rezanje navojev: M30 Podajalna hitrost osi X, Y in Z: 7 / 7 / 7 m/min Vreteno HSK 63, 15000 obr/min Hlajenje IKZ in AKZ Menjalec orodij z 32 mesti, razdeljeno na 2 x 16 kosov Obnovljeni deli: - Vreteno popolnoma obnovljeno in na novo navito s strani proizvajalca - Servisiran regulator vretena Bjdozlx Axspfx Altodf - Obnovljena napajalna enota Heidenhain - Preverjen glavni računalnik Heidenhain MC422 in krmilna enota CC422 - Zamenjani vozički in vodila osi y Dodatna oprema: Ročni obroč HR 410 Transporter ostružkov z integriranim rezervoarjem za hladilno tekočino Dokumentacija (navodila za uporabo, različni priročniki uporabljenih dokumentov, električna shema itd.) Prodaja iz zaloge; vmesna prodaja pridržana

Stanje: dober (rabljeno), 1 rabljena hitra radialna vrtalna naprava Proizvajalec: Donau Tip: DR 28 Z Letnik: 1985 Tehnični podatki: - Vrtalna zmogljivost v jeklu ST 60: 28 mm - Vrtalna zmogljivost v litini GG 25: 40 mm - Rezkanje navojev v jeklu ST 60: M 30 - Rezkanje navojev v litini GG 25: M 40 - Nastavek za vreteno: MK 3 - Premer vretena: 50 mm - Gib pinole: 150 mm - 18 vrtljajev vretena: 45 – 2240 vrt/min - 4 podaji za vrtanje: 0,1 – 0,45 mm - Min./maks. razdalja vreteno – miza: 300 / 700 mm - Vrtalni radij min./maks.: 305 / 1005 mm - Višina mize: 820 mm - Velikost mize: 1200 x 600 mm - Pogon: 400 V / 6 kW - Potrebna površina: pribl. Š 1300 x V 2800 x G 2300 mm - Teža: pribl. 1500 kg - Vključno z: - Napravo za rezkanje navojev - Hidravlično podpora stebra + objemka za podaljšek - Napravo za hlajenje Bodpfxezl Ufcs Altjdf - T-utori, nameščeni vertikalno na levi strani stroja

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge. Bedpozgvmqsfx Altjdf

Stanje: rabljeno, Leto izdelave: 1990, Nosilec MK 3 Serijska številka 4131 Domet 1000 mm Dokumentacija je na voljo Hidravlično vpenjanje, moč kW Masa stroja približno 2,6 t 3 metri tovornega prostora v tovornjaku Bodpozkbqvsfx Altedf

Stanje: dober (rabljeno), Donau DR 32, hitra radialna vrtalna naprava Visoko natančna in robustna hitra radialna vrtalna naprava, ki je v strojegradnji in industrijski proizvodnji cenjena zaradi svoje zanesljivosti. Zahvaljujoč vrtljivemu iztegu omogoča hitro in prilagodljivo pozicioniranje vrtalne glave nad obdelovancem. Tehnični podatki Bdjdpfxeznkgns Altsf Vrtalna zmogljivost: Največ 32 mm v jeklu. Nosilec orodja: MK 4 (Morseov stožec). Območje hitrosti: Približno 41 do 1.800 vrt/min Hod vretena: 190 mm do 200 mm. Izteg: Prilagodljivo nastavljiv od približno 240 mm do 850 mm Velikost mize: 1.200 x 600 mm Tipične funkcije Naprava za navoj: Vgrajena avtomatika za rezanje navojev (npr. do M26 v jeklu). Podi: Samodejni podaj vretena v več stopnjah Naprava za hlajenje: Vgrajena črpalka in kanal za hladilno tekočino neposredno na delovni mizi. „Vse na enem mestu: Z veseljem vam ponujamo ustrezno financiranje projekta prek banke.“ komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodne stroške pošiljanja vam sporočimo na zahtevo!

Stanje: dober (rabljeno), Donau DR 40 Z, hitra radialna vrtalna naprava Donau DR 40 Z je zmogljiva, konvencionalna hitra radialna vrtalna naprava, primerna za obrt in industrijo. Odlikuje jo visoka prilagodljivost ter možnost nagibanja in izvlačenja podaljška, kar omogoča hitro in natančno obdelavo obdelovancev. Tehnični podatki Vrtalna zmogljivost: do 40 mm v jeklu in 50 mm v liteželezu. Rezanje navojev: največ M 33 v jeklu in M 45 v liteželezu. Nosilec orodja: MK 4 (Morse stožec 4). Bdsdpfx Ajznkd Tsltof Hod vretena: 200 mm. Izmet: spremenljiv, od 320 mm do 1140 mm. Višina obdelovanca: največ približno 700 mm. Velikost mize: 1200 x 750 mm. Območje vrtljajev: od 45 do 2240 vrt/min. Pomik: od 0,075 do 0,6 m/min. Moč pogona: približno 6 kW. Teža: približno 1,8 do 2,0 tone. »Vse na enem mestu: z veseljem vam ponujamo ustrezno bančno financiranje za vaš projekt.« komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Donau Danuflex-128, hitra radialna vrtalna naprava Ročna hitra radialna vrtalna naprava priznanega nemškega proizvajalca DONAU Werkzeugmaschinen. Ta vrsta naprav se odlikuje po izjemno prilagodljivem in enostavnem sistemu vrtljivosti in se uporablja predvsem v orodjarstvu, pri izdelavi pripomočkov ter pri serijski in mali serijski proizvodnji. Tehnični podatki Vpenjalna glava: MK4 (Morse stožec 4) Delovna miza: 500 x 1055 mm Največji izstrel: 1120 mm Bdjdozni T Hjpfx Altef Hod vretena: 160 mm Premer stebra: Ø 150 mm Območje hitrosti: 45 – 2240 vrt/min (električno nastavljivo v stopnjah) Območje podiranja: 0,075 – 0,3 mm/vrt Moč motorja: 1,5 / 2,2 kW Skupna teža: približno 1.800 kg Dodatna oprema: Integrirana naprava za rezanje navojev »Vse na enem mestu: z veseljem vam ponujamo ustrezno finančno rešitev za vaš projekt.« komplett-konzept.leasingo.de Več izdelkov – novih in rabljenih – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Leto izdelave: 1988, Rapid Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (full hole): 40 mm Throat depth (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speed ranges: 2 Tool taper: MT 4 SPECIFICATIONS Table surface: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Supply voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHTS Width: 2500 mm Bdedpfoikvcaex Altsf Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Motor power: 6 kW