Hitri radialni vrtalnik

Donau DONAUMERIC440

Machining Performance:
Drilling capacity in solid St 60 / 40 mm
Drilling capacity in solid GG 20 / 50 mm
Thread cutting capacity St 60 / M 36
Thread cutting capacity GG 20 / M 42
WORKING AREA:
Arm travel (Y-axis) 1,050 mm
Column stroke (W-axis) 410 mm
Quill stroke (Z-axis) 200 mm
Distance spindle nose to tabletop drilling radius 80–690 mm
Swivel angle (C-axis) 330 degrees
Central clamping of arm and column
MACHINE TABLE
Clamping surface work table 1,800 x 600 mm
With 4 T-slots as per DIN 650 in X-direction (width/spacing) 18 h9 / 125 mm
Machine table height 900 mm
CONTROL / OPERATION
CNC control S-Box III
Processor: 32-bit CPU
Display: TFT flat screen, backlit and easily readable from all sides. 215 x 160 mm, Cartesian or polar.
Interpolation: 2 axes (X, Y)
Technology database: Tool management, tool suggestions according to machining operation, material-dependent cutting data recommendations
Tool management: max. 500 tools
Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking, and boring.
Chip breaking / chip discharge: possible during drilling cycle
Hole patterns: linear row, hole circle, matrix
Basic software: Conversational programming, 38 zero points can be stored, rotation and mirroring, teach-in for X, Y, Z.
Test graphics: graphical display of hole patterns
Data interfaces: V.24 / RS-232-C
Fgsdpfx Aowmcatsh Dsh
USB: For reading/writing data with industrial-grade 256 MB memory
MAIN SPINDLE DRIVE:
Three-phase asynchronous motor, frequency controlled
Drive power (100% duty cycle) 5.5 kW
Torque (100% duty cycle) 250 Nm
Constant from 15–200 rpm
Stepless spindle speed range 12–2,800 rpm
Tapered spindle: Tool mounting as per DIN 69871 SK40
with pull stud as per DIN 69872-19
AXIS DRIVES
C / Y / Z / W axis: max. 0.35 / 0.35 / 2.90 / 2.40 kW
Rapid traverse speed, stepless
C-axis max. 4.5 rpm, Y / Z-axis max. 7.5 / 5.0 m/min
W-axis max. 3.0 m/min
Feed rate, stepless
C / Y / Z / W axis: 5–2,000 mm/min
Feed force (Z-axis) max. 12,000 N
LUBRICATION
Central manual lubrication
MACHINE ENCLOSURE
Protective fence system arranged to enclose the machine, with mesh grid
External dimensions 6,000 x 6,000 mm (W x H; system element height approx. 2,000 mm)
1 access point (double-leaf door at the front of the machine, opening width approx. 2,000 mm)
Door opened and closed manually. Safety door switch with magnetic lock.
ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT & INSTALLATION POWER
Mains connection 400 / 50 Volt / Hz
Control voltage 24 Volt
Power consumption 13 kVA
Protection 35 A
Operating voltage: 3 x 400 Volt AC / N / PE +5% -10%. Neutral conductor loadable. Frequency: 50 Hz.
PAINTWORK
DD textured paint
Machine upper section light grey RAL 7035
Machine lower section RAL 5023
TRANSPORT DIMENSIONS
Width 1,900 mm
Depth 2,565 mm
Height 2,788 mm
MACHINE WEIGHT
Machine as a transport unit with standard table approx. 2,950 kg
OPTIONS:
Base plate with peripheral coolant channel. Clamping surface 1,000 x 1,400 mm.
Height 100 mm with 4 T-slots
Electronic probe, incl. SK 40 holder
Pick-up tool magazine
Programmable tool change for the rear work station. Magazine arrangement with 5 tool spaces including protective cover is mounted at the right-hand side of the machine
Coolant device version A: Integrated in the machine base for machines not considering a base plate, consisting of: Coolant tank with a capacity of 35 l, complete coolant pump assembly, flow rate approx. 40 l/min at 0.4 bar.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.