DN SOLUTIONS PUMA TT1300SYYB

DN SOLUTIONS PUMA TT1300SYYB

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Premer struženja 376 mm, dolžina struženja 760 mm, kapaciteta palice 76 mm, Y-os -/+ 52,5 mm, C-os 0,001 stopinje na obeh vretenih, 12-pozicijski revolver, motor 22 kW, glavno vreteno 4000 obr/min, podvreteno 4500 obr/min, Rjdpjyll Txefx Agtet 3-čeljustne vpenjalne glave, transporter odrezkov, merilnik orodja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, DOOSAN PUMA 2600LMB (2014) CNC LATHE WITH LIVE TOOLING & “C” AXIS, Z-1,350 Rsdpeyb Sryefx Agtst FANUC i Series CNC, 10.4” LCD Color EZ-Guide - Swing over bed: 780 mm - Swing over cross slide: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travels: X 260 mm / Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Headstock: 2,800 rpm, 22 kW - Driven tool turret: 12-station BMT 65P* (1-position indexing: 0.25 sec) - Live tooling: 5.5 kW, 5,000 rpm - C-axis indexing: 0.001 mm - Tailstock quill diameter/stroke: 100 mm / 100 mm INCLUDED EQUIPMENT: - Samchully HCH-15” hydraulic 3-jaw chuck, 380 mm diameter - C-axis 360° (0.001°) - Automatic tool presetter - Integrated tailstock - High pressure coolant pump - Chip conveyor - Preparation, base, and logic for steady rest - SMW AUTOBLOK SLU-3.1 hydraulic steady rest (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals CONDITION: Machine in good condition. Can be inspected under power. Immediate delivery.

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Rodpfx Agoyxpv Sjtjt Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Max. front drilling diameter: 12 mm Rodpfx Aeydaadegtet Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Redpeyyuvtofx Agtjt Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 3-osni CNC stružnica Tip: Puma GT 2600 LM Proizvajalec: Doosan Leto proizvodnje: 2022 Novo upravljanje Fanuc i Series Plus na dotik Hidravlična vpenjalna glava Samchully 12 palcev Maksimalni premer struženja: 410 mm Maksimalna dolžina struženja: 1030 mm Premer vretena: 81 mm Rsdpfx Asywthvegtjt Hitrost vretena: 3500 obr./min Glava z orodjem: 12 pozicij BMT 55 Hitrost pogonskih orodij: 5000 obr./min X: 265 mm Z: 1100 mm C: +-360° Transporter za ostružke LNS Sonda za orodja Konjiček MT5 z napravo: 4 pogonski nosilci orodij 2/2 8 običajnih nosilcev orodij skupaj 12 kosov Dokumentacija Stroj kot nov, le 1800 delovnih ur Ogled možen v našem skladišču

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Rsdpfsh Nypfjx Agtjt

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SECONDARY OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 7 kW WEIGHT AND DIMENSIONS - Space requirement: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operation hours: 26,657 h Rjdpfx Aoxlum Tjgtot - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Part extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar magazine: FMB turbo 3-26 / 3200 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HURCO TMX8MYS H-TS8034 Leto izdelave: 2011 Rsdpfx Agexg D A Hotot

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Rjdpfeywtwwjx Agtet Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360