CNC stružnica

DMG MORI NLX 2500 SY/700

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Krmilna enota Znamka: MITSUBISHI Model: M730UM s CELOS Glavni pogon Število osi: 4 Dodatna oprema Popolnoma zaprta povratna zanka za X-os Razkladalna enota za obdelovance vključno s trakom Avtomatska vrata Vmesnik za robota Gedpfx Ahjxlvb Ss Djbu Vmesnik za podajalec palic 10 zunanjih M-kod Transformator Možnost izmenične hitrosti // Možnost hitrega standardnega cikla (canned cycle) Možnost ostrih otokov in odprtih žepov Dodatek možnosti preskoka programskih blokov To 4-osno stružno-rezkalno središče DMG MORI NLX 2500 SY / 700 je bilo izdelano leta 2019. Opremljeno je z revolversko glavo Sauter s hitrostjo do 10.000 vrt/min, dvojnim vretenom z luneto, visokotlačnim hladilnim sistemom in popolnoma zaprto povratno zanko za X-os. Vključuje vmesnike za robote in podajalce palic, kar omogoča večjo avtomatizacijo in produktivnost. Izkoristite priložnost in kupite to stružno-rezkalno središče DMG MORI NLX 2500 SY / 700. Kontaktirajte nas za več informacij o stroju. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 10.665 h, številka stroja/vozila: NL256171030, Control system M730 UM Mapps CELOS Max. turning diameter: 350 mm Turning length: 700 mm Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Godpfx Ahjwum Hao Djbu Main spindle drive power: 18.5 / 15 kW Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – counter spindle: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 20 pos. Square shank height for tooling: 25 mm Drill shank diameter: 50 mm Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Machine weight approx.: 6.4 t Space required approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Counter spindle - Driven tool - C, Y-axis

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Gbjdpju Hq Rlefx Ah Dju Counter spindle bore: 43 mm Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Stanje: rabljeno, Leto izdelave: 2018, Technical details: Swing diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Maximum swing over bed: 742 mm Standard turning diameter: 275 mm Travel - X-axis: 260 mm Travel - Y-axis: 100 (+-50) mm Travel - Z-axis: 795 mm Rapid traverse - longitudinal/face: 30 / 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 18.5/18.5/15 kW Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 11 / 7.5 kW Turret stations / live tooling: 20 / 20 BMT40 Gjdpfx Ahjw Av T So Dobu Drive power live tools: 5.5/5.5/3.7 kW Live tool speed: 10,000 rpm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirement approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Barloader interface Parts catcher Workpiece and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Conveyor belt for part removal Automatic door Robot interface High-performance precision turning center with Y-axis and sub-spindle. Ideally suited for machining complex turned parts with off-center milling operations. Easy programming via CELOS-MAPPS 4 conversational control. The machine is powered and can be demonstrated under load. Very low operating hours. All available (live) toolholders are included. IRCO Simag bar loader is included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Gbedpfx Aowkf H Doh Dou Weight kg: 8,360

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Gbodpfx Ahovy Ig Ho Dju Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: rabljeno, Leto izdelave: 2014, Maximum turning diameter: 356 mm Turning length: 705 mm Control: 730 UM Celos Swing diameter over bed: 920 mm Swing diameter over cross slide: 740 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Feed rate: 0 – 5,000 mm/min Number of tool stations: 12 positions Shank height for square tools: 25 mm Shank diameter for drills: 50 mm Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 3.7 kW Total power requirement: 49 kVA Machine weight approx.: 6.4 t Gbodpfx Ahewd Txnj Dou Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - Y-axis - Only approx. 13,000 machining hours - incl. 4x driven tool holders - incl. 6x standard holders