Center CNC za struženje in rezkanje

DMG MORI NLX 2500 SY / 700

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL2561708843, število vreten: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Nwsdeyzxcgopfx Agxsf Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing diameter over bed mm: ø: 920 Swing diameter over cross slide mm: 740 Bar working capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool holder: BMT40 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse rate: 30 m/min Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% DC/50% DC/cont) Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25% DC/cont) Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Chip conveyor Signal lamp Machine Operating Hours: Power-on hours: 19,393 Cutting time: 8,800 Rated power consumption kVA: 48 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360 The tools shown, driven tools, and both chucks are not included in the scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Splošni podatki Nedpsx D Sc Nofx Agxewf Mere širina 3056 mm Mere dolžina 3994 mm Mere višina 2187 mm Teža stroja 6360 kg Glavni pogon Območje hitrosti vretena 4000 Število osi 5 Pomiki Pomik X-osi 260 mm Hitri pomik X-osi 30000 mm/min Pomik Y-osi ±50 mm Hitri pomik Y-osi 0000 mm/min Pomik Z-osi 795 mm Hitri pomik Z-osi 30000 mm/min Pomik B-osi 734 mm Hitri pomik B-osi 30000 mm/min Obdelovanec Premer nad posteljo 590 mm Premer nad suportom 360 mm Ta 5-osni stružno-rezkalni center MORI SEIKI NLX 2500 SY/700 je bil izdelan leta 2010 ter omogoča maksimalno nihanje obdelovanca nad posteljo 590 mm in dolžino struženja 795 mm. Stroj vključuje Y- in C-os, pomožno vreteno ter visokotlačni hladilni sistem. Namenjen je za obdelavo palic do premera 80 mm, opremljen je z odrezovalnim transporterjem in avtomatskim podajalcem palic. Izkoristite priložnost za nakup tega MORI SEIKI NLX 2500 SY/700 stružno-rezkalnega centra. Kontaktirajte nas za več informacij. Aplikacije Struženje

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included. Nsdoyxpv Sspfx Agxjwf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Njdpfx Ajywtwwsgxswf Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm. Repeatability: +/-3µm. Display error: +/-8µm. Measurement modes: program measurements / single measurements / statistical measurements. Includes various accessories. Documentation available. Nwjdpet H Rd Rjfx Agxef

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Nedjwkf H Dopfx Agxjwf Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: rabljeno, Leto izdelave: 2017, Maximalni promjer obrade: 356 mm Dužina obrade: 705 mm Nsdpfx Ajxzk Ifsgxjwf Upravljačka jedinica: M730 UM Mapps CELOS Promjer obrtnog kruga iznad ležaja: 920 mm Promjer obrtnog kruga iznad ravne klizne staze: 742 mm Raspon broja obrtaja glavnog vretena: 4.000 min⁻¹ Pogonska snaga glavnog vretena: 18,5 / 15 kW Vretena glava: JIS A2-8 Provrt vretena: 80 (91) mm C-os: 0,001° Raspon broja obrtaja kontravretena: 6.000 min⁻¹ Pogonska snaga kontravretena: 11 / 7,5 kW Provrt kontravretena: 43 mm C-os: 0,001° X-putovanje: 260 mm Z-putovanje: 795 mm Y-os: ±50 mm Brzoposmična os (X / Y / Z): 30 / 10 / 30 m/min Broj pozicija za alat: 12 poz. Visina drške za četvrtasti alat: 25 mm Promjer drške bušilice: 50 mm Vrijeme izmjene pozicije revolvera: 0,27 s Raspon broja obrtaja pogonjenih alata: max. 10.000 min⁻¹ Pogonska snaga pogonjenih alata: 5,5 / 4,2 kW Ukupna priključna snaga: 41 kVA Težina stroja cca. 6,4 t Dimenzije: cca. 4,0 x 3,0 x 2,3 m CNC tokarilica i glodalica DMG MORI - NLX 2500 SY / 700 - Kontravreteno - Pogon alata - C, Y-osa - samo 1.237h rada vretena

Stanje: rabljeno, Leto izdelave: 2014, X-hod: 400 mm Y-hod: 400 mm Z-hod: 375 mm Skupna potrebna moč --- kW Teža stroja ca. 7,6 t Potreben prostor ca. --- m DMG MORI DMU 40 EVO (2014) X - 400 mm Y - 400 mm Z - 375 mm Heidenhain iTNC530 z merilno sondo TS649 Hitrost vretena: 14.000 min⁻¹ Orodni magazin 30 pozic / Orodni priključek HSK63 Trakasti filtrirni sistem z notranjim hlajenjem (IKZ) 40 BAR Orodni magazin 30 pozic Njdpfxoycxihe Agxjwf Stroj je na zalogi pod napetostjo. Video na voljo.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status lamp - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measurement probe system - Parts catcher - Parts conveyor - Bar feeder: LNS QUICKLOAD Nsdpfex H Atyex Agxswf - Electrical transformer - Number of driven tool holders: 2 - Number of static tool holders: 10 - Collet chuck

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Nwodpfx Aovy Ig Hegxef Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 1.120 h, Aristech control system (similar to FANUC) Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Nwjdpfx Agsvvl Uajxjf Z travel: 250 mm Max. workpiece dimensions: 800 x 600 x 250 mm U axis Weight: approx. 3000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm The machine consists of the following units: 1. Wire EDM machine – main unit 2. CNC control cabinet 3. Water tank + pump 4. Water cooler 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still under power.