Center CNC za struženje in rezkanje

DMG MORI NLX 2500 SY / 700

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL2561708843, število vreten: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing diameter over bed mm: ø: 920 Swing diameter over cross slide mm: 740 Bar working capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool holder: BMT40 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse rate: 30 m/min Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% DC/50% DC/cont) Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25% DC/cont) Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Chip conveyor Signal lamp Machine Operating Hours: Power-on hours: 19,393 Cutting time: 8,800 Rated power consumption kVA: 48 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360 Hodpfx Agjyzxcgexol The tools shown, driven tools, and both chucks are not included in the scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. Hsdpfx Agsymcvmsxol • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment • Coolant tank with paper filter, 600 l • Touch probe • Chip conveyor • Electronic handwheel (remote control) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO Hodpfx Aeyxpv Segxjl High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Hedpfxeywtwwj Agxel Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: dober (rabljeno), max. gear diameter 250 mm with 3" cutter module 5.5 hobbing length 70 mm cutter module 5.5 max. recognized external diameter 300 mm Hodpjgq Dgdjfx Agxsl spindle diameter 85 mm table bore diameter 39 mm table external centering diameter 139.75 mm electric tool motor power 4 HP height 1,800 mm length 1,450 mm weight 2,450 kg width 1,000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Hodpfx Aowkf H Djgxel Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: rabljeno, Leto izdelave: 2017, Maximalni promjer obrade: 356 mm Dužina obrade: 705 mm Upravljačka jedinica: M730 UM Mapps CELOS Promjer obrtnog kruga iznad ležaja: 920 mm Promjer obrtnog kruga iznad ravne klizne staze: 742 mm Raspon broja obrtaja glavnog vretena: 4.000 min⁻¹ Pogonska snaga glavnog vretena: 18,5 / 15 kW Vretena glava: JIS A2-8 Provrt vretena: 80 (91) mm C-os: 0,001° Raspon broja obrtaja kontravretena: 6.000 min⁻¹ Pogonska snaga kontravretena: 11 / 7,5 kW Provrt kontravretena: 43 mm C-os: 0,001° X-putovanje: 260 mm Z-putovanje: 795 mm Y-os: ±50 mm Brzoposmična os (X / Y / Z): 30 / 10 / 30 m/min Broj pozicija za alat: 12 poz. Visina drške za četvrtasti alat: 25 mm Promjer drške bušilice: 50 mm Vrijeme izmjene pozicije revolvera: 0,27 s Raspon broja obrtaja pogonjenih alata: max. 10.000 min⁻¹ Pogonska snaga pogonjenih alata: 5,5 / 4,2 kW Ukupna priključna snaga: 41 kVA Težina stroja cca. 6,4 t Dimenzije: cca. 4,0 x 3,0 x 2,3 m CNC tokarilica i glodalica DMG MORI - NLX 2500 SY / 700 - Kontravreteno - Pogon alata Hsdsxzk Ifspfx Agxsl - C, Y-osa - samo 1.237h rada vretena

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Hsdpfx Agjg Dgymoxel Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW Hedpfx Agsx H Atyexel - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status lamp - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measurement probe system - Parts catcher - Parts conveyor - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of static tool holders: 10 - Collet chuck

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Counter spindle bore: 43 mm Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Hsdpfx Agou Hq Rloxol Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Stanje: rabljeno, Leto izdelave: 2005, Obratovalni premer 290 mm Obratovalna dolžina 300 mm Krmiljenje Heidenhain Premer vrtenja nad ležiščem 380 mm Hsdpfeyb S Ihjx Agxol Skupna potrebna moč --- kW Teža stroja ca. --- t Potreben prostor ca. --- m Gildemeister CTX 2100 - 2005 s C-osjo