Zaslon monitorja

DMG Gildemeister Supply 11098

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Rsdsdx D Tvspfx Agtjt

Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm, Univerzalni rezkalni stroj za kov Proizvajalec: MAHO Model: MH 1000 Rsdpfx Aop S Schjgtst Na voljo 2 kosa! x-hod 1000 mm Vpenjalna glava SK 40 Digitalni prikaz. Glava nagibna +/-. Miza nagibna in vrtljiva +/-. Pomik pinole. - 3-osni digitalni prikaz - Univerzalna miza 1.250 x 740 mm (T-utori 16 mm) - Vertikalna rezkalna glava SK 40 z navojem S 20 x 2 - 6 avtomatskih pomikov pinole 0,02/0,03/0,05/0,08/0,12/0,20 mm/obrat - Centralno mazanje, ročni pogon Stroj je mogoče ogledati. Takoj pripravljen za uporabo. Prosto naloženo, prevoz ni problem.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 33.831 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, model krmilnika: '3D contouring control Millplus, teža obdelovanca (maks.): 1.000 kg, skupna dolžina: 7.000 mm, skupna širina: 3.500 mm, skupna masa: 3.902 kg, hitrost vretena (min.): 18.000 obr/min, moč vretenovega motorja: 15.000 W, Year of manufacture: 2000 CNC control: 3D contouring control Millplus Axes Travel X-axis mm: 1250 Travel Y-axis mm: 880 Travel Z-axis mm: 800 C-axis indexing degrees: 360º (0.001) Feed rate m/min: 40 Rapid traverse m/min: 40 NC milling/turning table: Number of pallets: 1 Pallet dimensions mm: Ø1000 Max. workpiece weight kg: 1000 Max. torque Nm: 7900 Spindle Max. spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40% duty cycle/continuous) Cooling Tank capacity liters: 600 Tool system Tool holder: CAT 40 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun Prepared for RENISHAW probe Accuracy package Prepared for internal coolant (40/80 bar) Paper band filter Machine run time: Hours powered on: 33831 Rodpfx Agexvrbiotet Spindle working hours: 6328 Total power requirement kVA: 55 Base machine: Dimensions/Weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 20.325 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC430, skupna višina: 3.200 mm, širina mize: 1.250 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 18.000 kg, največja hitrost vretena: 8.000 obr/min, število mest v zalogovniku orodij: 120, največja dolžina izdelka: 6.000 mm, število osi: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control unit, an SK50 spindle taper, and a 120-position tool magazine. With a total of 22,180 spindle hours, this is an excellent opportunity to purchase the universal machining center DMG DMU 125 P hi-dyn. Please contact us for further information about this machine. • Spindle hours: 22,180 • Tool magazine/positions: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 Redpfx Aex Sz Dhsgtet • Tool changer: 120 positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working area: X-axis: 1250 mm, Y-axis: 880 mm, Z-axis: 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (H) • Weight: approx. 18,000 kg B-axis is indexed Additional features: • Full enclosure • Through-spindle coolant supply • Air blast through spindle retrofitted • Chip conveyor • 600-litre coolant tank • NC rotary table D1250 x 1000 mm • Maximum table load (center): 2,000 kg • Clamping grid: 9 T-slots 18H7 at 100 mm spacing • Motor package with SK50 gearbox — spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes available • Rinsing gun with pump Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8000 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, GRASSELLI T30,F ID št.: 2895 Grasselli model T30,F – stroj za lupljenje rib, širina valja 30 cm. Enostaven, praktičen in kompakten stroj, ki je preprost za uporabo in čiščenje. Rjdpfx Agev Abyfotot Dimenzije stroja: 47 x 45 x V 100 cm.

Stanje: rabljeno, Leto izdelave: 2007, Tehnične podrobnosti: x-pomik: 1.250 mm y-pomik: 710 mm z-pomik: 710 mm Površina mize: 1.500 x 800 mm Obremenitev mize: 800 kg Obrati: 12.000 1/min Motor vretena: 15 / 10 kW Krmiljenje: MILLPLUS iT HEIDENHAIN Vpenjalo vretena: SK 40 Menjalec orodja: 60 pozicij Poraba moči: 44 kVA Teža stroja pribl.: 10,5 t Prostorska zahteva pribl.: 3,5 x 2,65 x 2,65 m 5-osni simultani obdelovalni center, B-os (-120° / +30°), Rjdpfx Aoya Amxogtst NC-rotacijska miza integrirana v fiksni mizi, Neposreden merilni sistem, 3D tipalo infrardeče HEIDENHAIN TS 640, IKZ 40 bar, 600 l, Izpirna pištola, Transporter za odrezke, BA 4, 3D quickset – programska oprema, približno 48.500 delovnih ur / 18.000 ur vretena

Stanje: generalkompletno obnovljen (rabljeno), Shank cutter, slot cutter, corner cutter Make: Walter Model: Prototyp P 31 23017-20 Redpfxoiuh E Ij Agtet Shank diameter: 20 mm Cutting diameter: approx. 19 mm Cutting length: 38 mm Used, freshly ground and coated Material: HSS Co

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), A CNC 4-axis universal bed milling machine Maho is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle taper: SK50, main spindle speed: 4000rpm, power: 22kW. Tool stations: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16,000kg, control: Philips CNC 232. An on-site inspection is possible. Redpsv Ubqnsfx Agtst

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Rjdetq Nlcjpfx Agtot X-axis travel: 1250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Control: Heidenhain TNC 430 Tool changer: 60 positions Tool holder: SK 50 Spindle speed: 8,000 rpm Pallet size: 1000 x 800 mm Total power requirement: 56 kVA Machine weight approx.: 14.3 t Space requirement approx.: 5.5 x 3 x 3.1 m 5-axis machine with controlled universal milling head as B-axis 2-station pallet changer including 2 pallets 1000 x 800 mm Production package consisting of: - Internal coolant supply (IKZ) with 40 bar operating pressure, 900l coolant tank (2.25 x 1.3 x 2.2 m / 950 kg) - Chip conveyor (4.85 x 1.2 x 1.75 m / 600 kg) - Rotating viewing window - 3D probe RENISHAW MP 10 - Electronic handwheel - Mechanical tool breakage control Accessories (SK 50 tool holders) Approx. 100,200 operating hours, approx. 52,500 spindle hours, last spindle replacement in 2020