Stiskalnica za neprekinjeno lepljenje

Dimter CONTIPRESS

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Cgsdpfow Sy T Hox Afnep Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC Cgodpfx Aeqwyclofnsp X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Cgedpfxod H Sc Ej Afnjp Gewicht: 4.700 kg

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 2.050 mm, vrsta nastavitve višine: pnevmatičen, višina skobljanja: 300 mm, 4-sided planer, working width: 2200 mm Codpfxow A A Ebs Afnegp mounted on a rotary table for curved workpieces machine is enclosed

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor Cgodpfx Aewclkyofnep The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 37.000 h, številka stroja/vozila: 1651, doseg roke: 15.200 mm, nosilnost: 1.900 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Csdpfx Aov Hwk Uofnegp Lifting capacity without grab: 1,900 kg / 15.0 m Grab: included Crane position: behind the cab Cab side: center !! Sale on behalf of customer !!

Stanje: rabljeno, Leto izdelave: 2000, Število vreten: 5 kos Delovna širina: 230 mm Cgsdpfxewztw Sj Afnep Višina obdelave: 160 mm Pogonski motor podajalnika: 4 kW Podajalna hitrost: 5–24 m/min. Stružnica in profilirka Weinig Unimat 23E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev in utornim ležiščem (opcijsko brez utornega ležišča) za kratke in ukrivljene obdelovance ter z dolgim vijačnim vodilom. Opcijsko: Predelava na klasično gladko mizo, na zahtevo. Vreteno 1: Spodaj / 40 mm / 5,5 kW Vreteno 2: Desno / 40 mm / 7,5 kW Vreteno 3: Levo / 40 mm / Skupni motor z vretenom 2 Vreteno 4: Zgoraj / 40 mm / 7,5 kW Vreteno 5: Spodaj / 40 mm / 5,5 kW

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Cgodpot Apugjfx Afnep Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Industrial Band Saw – Power, Precision, and Reliability in Every Cut – HEAVY DUTY MACHINE Equipped with a powerful electric motor of 30, 37, 45, or 55 kW, this band saw delivers outstanding performance, allowing for cutting capacity of up to 35 m³ of logs per 8-hour shift. With a maximum log diameter of Ø1150 mm, it easily handles even the most demanding timber. Key Advantages: • High Precision – Perfectly straight cuts with minimal deviations. • Power and Efficiency – High motor output ensures fast and efficient cutting. • Robust Construction – Built to withstand the toughest working conditions. • Easy Operation – Intuitive control system for quick adjustment of all parameters. • Safety Systems – Integrated safety mechanisms for secure operation. Whether you're in the wood industry, a sawmill, or a large-scale workshop, this saw is the ideal solution for high-productivity and precise cutting of large logs. High degree of automatisation with Siemens / Scheider PLC and Wravor Cgedpfx Aewfqqdofnjp FastSmartCut program, always with option with manual control.

Stanje: rabljeno, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotation speeds, electric table lifting device Codpfsrxf Smex Afnsgp