Rezkalni stroj

Deckel FP4 M

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain ND780 Digital Readout, Special Finish in Light Grey! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Drawbar system: M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis digital readout system Heidenhain ND780 >> Coolant system >> Chip tray >> Centralized lubrication About the machine: Hsdpfoylmh Dex Ag Tei Offered here is a Deckel FP4M universal milling machine in very good condition. The machine is partially overhauled, with minimal backlash and all slides/spindles move smoothly and evenly. Even at maximum spindle speed, the milling machine runs quietly. Rapid traverse is available on all axes, with all bellows replaced. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been carried out. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power on site. For an additional charge, the machine can be supplied in CE-compliant configuration.

Stanje: novo, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot size ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Table longitudinal travel ----- 560 mm Table cross travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Ph INCLUDES * Drill chuck with shank ISO30 - B16 * Forward/Reverse switch * Spindle guard * Fine adjustment Hodpoga T Ansfx Ag Tei * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * ISO30 tool holder + 12 collets in case * Milling cutter set

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paint Finish!!! Technical Data: Hedpfxsvg Ewcs Ag Tsi >> Year of manufacture: 1987 Machine no.: 2203-2772 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier: 150 mm >> Vertical and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Drawbar system: M16 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP4M in very good condition. The machine has minimal backlash, and all feed screws can be moved smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and more precise. You are welcome to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital display in special light grey paint! Technical Data: >> Year of manufacture: 1986, Machine No. 2203-2486 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle stand, adjustable by 150 mm >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1,500 kg Hodpjvb T Ufjfx Ag Tsi Accessories and Equipment: >> 3-axis digital readout Heidenhain >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine in very good condition. The machine exhibits minimal play in the handwheels and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. The oil has been changed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stanje: novo, Drilling capacity in steel (diameter): 13.0 mm X-travel: 300 mm Y-travel: 130 mm Speed: 100 - 2500 rpm Throat depth: 165 mm Spindle taper: MT 3 Table size: 490 x 120 mm Milling cutter diameter: 30.0 mm Motor: 230 Volt Total power requirement: 0.75 kW Machine weight approx. 50 kg Space requirement approx. 520 x 500 x 740 mm Description: - Brushless DC motor - Ensures optimal torque in the lower speed range - Dovetail guideways on X, Y, and Z axes Hedpfxoxabb Ho Ag Tsi - Backlash-free adjustable via gib strip - Milling head swivels both sides for angle drilling, bevel milling, etc. - Quill adjustment via handle, fine adjustment via handwheel - Precisely ground cross table with T-slots - Maintenance-free 500 W drive motor runs smoothly - Infinitely variable speed control for adaptation to the workpiece - Individually lockable guides ensure a clean milling finish Scope of delivery: - Geared drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 3 / B16 - Drawbar M12 - Height-adjustable safety guard - Operating wrench

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Hodpfx Agsxcldko Toi Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Dear Sir or Madam, We are pleased to offer you very well-maintained Deckel FP4M milling machines. Each machine is at least technically inspected in our workshop and is therefore fully functional. We look forward to your inquiry! Delivery time: on request Machine number: xxxx-xxxx Year of manufacture: xxxx Table version: fixed Spindle speed: 50 - 2500 rpm Feed: 8 - 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Weight: approx. 1.6 t Further equipment and accessories: on request Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color of your selected machine - If desired, you can order further accessories such as tools directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation Hedpfx Agjlrw Tis Tsi

Stanje: novo, WMD25LV - 230V / 1Ph Drilling capacity in steel: 25 mm Milling capacity in steel: 20 mm Hsdpfx Agoga T Eij Tji Face milling: 63 mm Motor: brushless 750W Spindle speed, stepless: 50 - 3000 rpm Spindle travel: 50 mm Spindle taper: MT3 Worktable: 700 x 180 mm Cross travel: 150 mm Longitudinal travel: 490 mm T-slots: 3 x 12 mm Throat: 170 mm Distance spindle - table: 325 mm Weight: 160 KG STANDARD ACCESSORIES * Drill chuck incl. key * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right switching * Milling head rotatable left / right 90 degrees * Toolbox with various tools OPTION * Stand cabinet € 249.00 excl. VAT

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 90 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly and partially refurbished in our workshop, bringing it to an absolutely top condition, making it technically, visually, and geometrically almost indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Axis travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Hedpox Irwdsfx Ag Tei Weight: approx. 1600 kg Table design: rigid angular table or rotary/swivel/tilt table Additional features and accessories include: Heidenhain 3-axis digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request… Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - You can freely choose the color of your selected machine - If desired, you can order additional accessories, such as tools, directly - On request, we can install additional accessories, such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2203-7097 with warranty Hodpslfc U Dofx Ag Tei Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant unit - Operating manual Used as seen The machine corresponds technically to the state of the art of its year of manufacture.

Stanje: novo, The machine is supplied without a base. The BF3 Deluxe base is available separately under item number 56-1017. Technical data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill cutter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Quill travel: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head swivels: -60° to +60° Spindle to table distance: 95 - 485 mm Milling head vertical adjustment: 390 mm T-slot size: 14 mm Power feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT4 / B 16 - Drawbar M 16 - Reducing sleeve MT4 / 3 - Combination shell end mill arbor MT4 / 27 mm - Height-adjustable safety guard - Automatic quill feed Hsdpfx Agjv N Uyrs Toi - Power feed motor for milling head - LED machine lamp - Digital quill travel display - Thread cutting device - Laminated protective cover - Longitudinal measuring scale - Operating tools Base not included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site. Hodpfx Agoxctyao Toi

Stanje: dober (rabljeno), Leto izdelave: 1987, Deckel FP4M, orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazom, fiksna miza, SK 40 vpenjalni vretena, dodatki: različne vpenjalne tule in stebla za rezkala. V dobrem delovnem stanju, pripravljen za uporabo. Po dogovoru je možen preizkus pod napetostjo. Hedpfx Ajxmi I Ieg Tji

Stanje: novo, Leto izdelave: 2025, Heavy, robust cast construction High running smoothness due to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine adjustment Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head swivels ± 60° Adjustable gib strips Heavy-duty hand-scraped dovetail column guide for maximum stability and precision Height-adjustable, large protective shield with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy, large dimension cross table, precisely surface-machined with T-slots and adjustable gib strips Sturdy cast machine base with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 steplessly adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/milling capacity Max. cutter head size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel S235JR): 24 mm Continuous drilling capacity (steel S235JR): 20 mm Electrical data Connection voltage: 230 V Network frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Milling table (horizontal) Length: 800 mm Width: 240 mm Distance vertical spindle – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm Hjdpfx Aeg U Uv Uog Toi X-axis automatic: 480 mm Vertical spindle Reach: 258 mm Spindle mounting: MT 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Swivel range of milling head Z – X plane: ± 45° Quill diameter: 75 mm Quill stroke: 120 mm Location: Available from stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pomik X: 500 mm Hsdpfx Agew I A D Ts Tji Pomik Y: 400 mm Pomik Z: 400 mm Število obratov: 50 – 2500 obr/min Pogonska moč: 2,7 / 4,4 kW Vpenjalo orodja: SK 40 s hidravličnim vpenjalcem DIN 2080 Vrsta mize: fiksna ali nagibna miza Vpenjalna površina mize: 650 x 380 mm Teža: 1600 kg Dimenzije (z varnostnim območjem): pribl. 2500 x 2700 x 1950 mm Barva: RAL 6011 resedino zelena Digitalni prikaz: 3-osi HEIDENHAIN Oprema: centralno mazanje, KSS-kad, dodatna oprema na zahtevo