Stroj za točkovno varjenje Dalex PMS 11-4

Dalex PMS 11-4

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V With auxiliary control cabinet according to VDE 0100 Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg Fedpju A Dg Eefx Ah Djpn

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Fedpfx Ahoiknv Eo Dspn

Stanje: rabljeno, Maks. varilna moč 77 kVA, glej podatkovne tablice, dolžina varilne roke 1030 mm, hod elektrode 550 mm, električno/pnevmatsko nožno stikalo, 3/4'' priključek za vodno hlajenje, stroj je bil po nakupu zelo malo uporabljen. Razni bakreni in volframovi elektodi kot dodatki. Fodpew I Hgxsfx Ah Depn

Stanje: zelo dobro (rabljeno), globina grla: 1.100 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 96 kVA, tok kratkega stika: 31.500 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 830 kg, Oprema: Na voljo je tipska ploščica, Spot Welding Machine Type PMS 11-4 G3 in 3-Phase Direct Current Version - specially designed for welding aluminium sheets - minimally used, fully inspected and cleaned - everything functions, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96 kVA - Welding current: 23 kA - Connection cable cross-section: 10 mm² per phase - Fuse protection: 63A - Throat depth: 1050 mm (!!) - Electrode arm diameter: 60 mm - Electrode holder diameter: 30 mm - Electrode force: 600 daN - Stroke: 65+25 mm - Electrode taper: MK2 - Control: MPS 8043/1 by Harms & Wende with current increase and pulses - includes operating manual - 2-step foot switch in accordance with UVV - Main machine switch - Pneumatic maintenance unit - Weight: approx. 830 kg - Complete documentation with wiring diagram, compressed air circuit, and cooling water circuit available - VAT can be shown separately Fpsdpfx Ahoh N Sc Es Don - Delivery from stock Dresden, approx. 4 days within Germany – export may take longer! Commissioning on-site is subject to a fee and will be billed based on actual effort. System is located in Dresden, close to the A17 motorway, and can be inspected and demonstrated by appointment.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 80 kVA Short-circuit current: 45.4 kA Electrode force: 100–600 daN / single stroke Fsdpfjwqmrnox Ah Dopn Throat depth: 350 mm --- Control unit: MPS 100mono (8 cycles, 1 program) Pre-installed upper electrode holder Foot switch Adjustment device, Electronic flow monitor 4-step transformer tap switch and main switch. --- Warranty: 6 months --- Training and commissioning available upon request --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Fpodpfxju Nv Ems Ah Djn Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Fedpfx Ahjhmvaws Dopn Main switch Synchronous welding controller 8033 Weight: 740 kg

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Na voljo je srednjefrekvenčni točkovni varilni stroj Dalex-Werke. Izpust: 350mm, hod elektrode: 90mm, premer nosilca elektrode: 30mm, konus elektrode: MK2, nazivna moč pri 20% ED: 180kVA, maksimalna varilna moč: 200kVA, primarna napetost: 400V, nazivna frekvenca: 1000Hz, sila elektrode: 20daN-600daN. Teža: cca 575kg, krmiljenje: HWS 2102. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fpodow H Sc Aspfx Ah Dsn

Stanje: zelo dobro (rabljeno), combined spot and projection welding machine Manufacturer: DALEX Model: PMS 11-4 Version "B" Throat depth: 350 mm Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15–4.33 V Fpodewz Rz Ijpfx Ah Dsn Electrode force: 190–1140 daN Equipped with 4-step switch Control cabinet mounted according to VDE 0100 With main switch Synchronous welding controller with monitoring function MPS 8043-1 IQ1 Selector switch for operation with dual-hand safety control panel and foot pedal Sample photo Machine currently being overhauled

Stanje: zelo dobro (rabljeno), Roll seam welding machine in longitudinal seam design Fpedpfxjtxl Ivs Ah Don Make: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet according to VDE 0100 Main disconnect switch Synchronous welding control 8036 Weight: 635 kg Sample photo – Machine is still being refurbished