Projekcijski varilni stroj

DALEX PMS 11-4

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Electrode force: 100 daN, welding power: 255 kVA, rated output: 80 kVA, with DALEX DRF 5.2 cooling system. Hfsdpfsiknv Eex Afwsf

Leto izdelave: 2000, stanje: rabljeno, TIG welding machine, direct current, 380 Volts, suitable for stainless steel Hjdsgt Auujpfx Afweff Arkoquad 220, 40% duty cycle at 220 A, 10% duty cycle at 140 A, complete with torch, ground cable, pressure reducer, and water cooling.

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Power Output: 60 kVA Throat Depth: 680 mm Arm Spacing: 115 / 415 mm Adjustable Jaw Opening: 180 mm Rated Power: 60 kVA Welding Power: 71 kVA Electrode Force: 100 to 600 daN Voltage: 380 V / 50 Hz Air Pressure (min./max.): 6 / 10 bar Cooling Water Consumption: 12 l/min Machine Weight approx.: 685 + 200 kg Supply Voltage: 380 V / 91 A Nominal Power: 60 kVA Connected Load: 54 kVA Dimensions L-W-H approx., Machine: 1,700 x 850 x 1,750 mm Dimensions L-W-H approx., Aggregate: 900 x 650 x 1,000 mm SPOT WELDING MACHINE - WELDING TRANSFORMER Three-phase DC Welding Machine Hedpfeu Nv Emsx Afwsff Application: Spot, projection and series spot welding Maximum Short-Circuit Power: 89 kVA Primary Short-Circuit Current: 135 A Secondary Current = Short-Circuit Current: 25 kA, Welding Current max. 20 kA Electrode Stroke max.: 90 mm; Electrode Force min./max.: 100 daN / 600 daN Max. Stroke Rate at 10 mm stroke: 400 strokes/min Spot Armature: Electrode holder Ø 30 mm, adjustable 180 mm, Arm spacing min./max.: 115 / 415 mm Double Foot Switch Cooling unit, mobile – on wheels for portability, output 1.45 kW, pipe connection R 3/4 inch, refrigerant R22

Stanje: dober (rabljeno), Srednjefrekvenčni točkovni varilni stroj 1000 Hz, 400 V 50 Hz Proizvajalec: DALEX Tip: PMS 11-4 MF Izpostava: 950 mm z dvojnim hodom cilindra Hfodpfsvyk Sfex Afwjf Nazivna moč pri 20 % ED: 180 kVA Sekundarni kratkostični tok: 37 kA Sekundarna napetost v prostem teku: 9 V Sila elektrode: 60–600 daN Teža: 550 kg

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), 1x Drive unit with chassis 1x Idler unit with chassis and height adjustment - Central roller support adjustment with hand crank. - Manual height adjustment, locking with pin - Height difference adjustable from 0–350 mm - Load capacity: 2,500 kg per unit - Component diameter: 200 mm – 2,000 mm - Wheels: PUR rollers - Dimensions (L/W): approx. 1,900 mm x 460 mm Hfsdpfefxgrdox Afwof - Chassis track width: 1,435 mm - Rotation speed: 0 – 2,000 mm/min - Operation: Handheld remote control and foot switch

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Hodohmvawjpfx Afwoff Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled 3-phase DC spot welding machine Manufacturer: DALEX Model: PMS 11-4 G3 Throat depth: 650 mm Equipped with a special cylinder for low pressure range from 20–120 daN Rated output at 50% duty cycle: 60 kVA Secondary short-circuit current: 25 kA Secondary open-circuit voltage: 3.68 V With auxiliary control cabinet according to VDE 0100 Hfodpfx Afju A Dg Eswjf Main disconnect switch Synchronous welding controller 8036 Weight: 685 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 05542, Offer 25128 Hjdpfx Afown Emlowsff Technical Data: - Rated power at 50% duty cycle: 25 kVA - Maximum welding power: 68 kVA - Throat depth adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding capacity for sheet steel approx.: 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water flow: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - Equipped with: - Single-phase controller T 90 Mark II - Electric foot switch - Separate cooling water recirculator

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 80 kVA Short-circuit current: 45.4 kA Electrode force: 100–600 daN / single stroke Throat depth: 350 mm Hedewqmrnspfx Afwsff --- Control unit: MPS 100mono (8 cycles, 1 program) Pre-installed upper electrode holder Foot switch Adjustment device, Electronic flow monitor 4-step transformer tap switch and main switch. --- Warranty: 6 months --- Training and commissioning available upon request --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: zelo dobro (rabljeno), globina grla: 1.100 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 96 kVA, tok kratkega stika: 31.500 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 830 kg, Oprema: Na voljo je tipska ploščica, Spot Welding Machine Type PMS 11-4 G3 in 3-Phase Direct Current Version - specially designed for welding aluminium sheets - minimally used, fully inspected and cleaned - everything functions, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96 kVA - Welding current: 23 kA - Connection cable cross-section: 10 mm² per phase - Fuse protection: 63A - Throat depth: 1050 mm (!!) - Electrode arm diameter: 60 mm - Electrode holder diameter: 30 mm - Electrode force: 600 daN Hodsh N Sc Eepfx Afwsff - Stroke: 65+25 mm - Electrode taper: MK2 - Control: MPS 8043/1 by Harms & Wende with current increase and pulses - includes operating manual - 2-step foot switch in accordance with UVV - Main machine switch - Pneumatic maintenance unit - Weight: approx. 830 kg - Complete documentation with wiring diagram, compressed air circuit, and cooling water circuit available - VAT can be shown separately - Delivery from stock Dresden, approx. 4 days within Germany – export may take longer! Commissioning on-site is subject to a fee and will be billed based on actual effort. System is located in Dresden, close to the A17 motorway, and can be inspected and demonstrated by appointment.

Stanje: zelo dobro (rabljeno), water-cooled, foot-operated rocker arm spot welding machine Manufacturer: DALEX Model: SF 8/71 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA Secondary open-circuit voltage: 2.0 - 3.2 V Electrode force: 52-235 daN Arm gap: 140 mm Hfedpfx Afep H T Awjwef Throat depth: adjustable from 80 to 300 mm with 4-step selector switch Single-time asynchronous welding controller, current time 2-100 periods

Stanje: zelo dobro (rabljeno), Roll seam welding machine in longitudinal seam design Make: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN Hfedstxl Ivepfx Afwef with mounted control cabinet according to VDE 0100 Main disconnect switch Synchronous welding control 8036 Weight: 635 kg Sample photo – Machine is still being refurbished