Comec FR/2 Programirljiv avtomatski rezkalni stroj za noge otroških postelj ali podobnih izdelkov...

Comec FR/2

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), 2 movable spindles Pneumatic clamping Bedpfxohh S Dxe Afqedk Inverter-driven motors

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) Bdsdpfx Afsvnv Uzjqjk 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 1.250 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), premer žaginega lista: 450 mm, širina obdelovanca (maks.): 300 mm, višina obdelovanca (maks.): 30 mm, zračni tlak: 6 letvica, premer povezave za izpihovanje: 200 mm, premer honanja: 125 mm, število vreten: 2, MARINUS PROMAX – Endenbearbeitungs- und Defektsägemaschine Die Maschine entspricht den folgenden Spezifikationen: • Robuste und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Durchlaufzuführung mit präziser Positionierung (Servo-Antrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Bearbeitung. • SPS-Steuerung. • Bedienung über Terminal. • Modem für Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n=12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 pneumatische Zylinder mit Ventilen. • 1 Lumineszenzsensor • 6 Induktivsensoren • Bandförderer für Abfall, Höhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine gemäß CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Optional können wir Werkzeuge (Nut und Feder) mit Wendemessern sowie zwei Kappsägeblätter für die Maschine anbieten. Standardprogrammierung: Die Maschine verfügt über zwei Hauptprogramme: 1. Endenbearbeitung 2. Zuschnitt Beide Hauptprogramme beinhalten zwei Unterprogramme: 1. Variable Längen: Defekte werden ausgeschnitten, Endprodukte haben variable Längen. 2. Feste Längen: Bretter werden in einer festen Länge produziert, die Einfuhrlänge darf maximal +200 mm Übermaß betragen. Defekte können hierbei nicht ausgeschnitten werden. Bdjdpfx Aoq Auhdefqsk • Min. Breite: 60 mm • Max. Breite: 300 mm • Min. Länge: 500 mm • Max. Länge: 6000 mm • Min. Stärke: 10 mm • Max. Stärke: 30 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition. Bdedpfxewya Sye Afqjk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS Bedpfx Afoxfaf Uoqodk 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Max. workpiece height: 280 mm, tool holder: HSK 63F, weight: 6.5 t, inspection possible. Bdedpfx Afsn Tpm Heqsk

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Bodpfehw Ng Iex Afqodk Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available Bedpfjh E Sghjx Afqjdk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, 1. Fräskopf-Entrindungsanlage Baljer Zembrod Bsdpfx Aewtpmgefqedk - Baujahr 1999 - Schwerer, 4-strängiger Rundholz-Querförderer - Entrindungswagen - Fräskopf - Hobelkopf für saubere Nachbearbeitung - Wurzelreduzierer - Bedienkabine - Schienen - Auswurfboxen

Leto izdelave: 2025, Stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Polni se z viličarjem Zmanjšuje fizično obremenitev Bodpfxohbg Uxe Afqodk Povečuje učinkovitost