Pogon žerjava 3 do

Columbus HTP

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Tsdpfofi Tg Hjx Altja Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Univerzalni orodjarski rezkalni stroj DECKEL tip FP 1 Serijska št.: 51265 Leto izdelave: cca 1967 Pomiki X: 300 mm Y: 150 mm Z: 340 mm Velikost mize 600 x 200 mm Vpenjanje vretena SK 40 - S20 x 2 Hitrost vretena 40-2000 vrt./min, 16 stopenj Moč motorja 1,0 in 1,6 kW, preklop polova Omrežni priključek 380 V, 50 Hz - Pomik v X in Z osi - Hitrosti vretena prek 2 hitrosti motorja in 8 stopenj v menjalniku - Pomik pinole na vertikalni rezkalni glavi 60 mm - nagibna, vrtljiva in nagibna kotna miza - Črpalka za hladilno sredstvo v podnožju stroja Todsghtvaopfx Altea - Prosto stoječa komandna omara Dimenzije DxŠxV 1100 x 1100 x 1600 mm Teža 690 kg V dobrem stanju

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed Todpfx Aljf Ep Distja • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) Tsdpfod Nt Rqex Altsa - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space Tjdpfx Asdh Tfgjltoa

Stanje: rabljeno, Leto izdelave: 1990, Sheet width: 3050 mm Sheet thickness: 12 mm Gap between columns: 3100 mm Table height above floor: 900 mm Adjustable cutting angle: 0.5 - 3° Strokes per minute: 6 - 13 spm Back gauge - adjustable: 1000 mm Hold-downs: 18 units Oil capacity: 350 l Total power requirement: 22.5 kW Machine weight approx.: 8 t Machine dimensions (L x W x H): 3.96 x 2.10 x 2.22 m - with adjustable cutting gap - Tsdpju Uu Smefx Altoa Accessories: electric back gauge, spare blades

Stanje: zelo dobro (rabljeno), Leto izdelave: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle taper MK 5 Throat depth 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-speed 3.6 / 4.8 kW Clamping area, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Tjdotwzk Depfx Altea Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Power feed • Forward/reverse operation • Motorized vertical adjustment (up and down) • Wide speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was mounted on a VTC 300, now for sale due to upgrade to a new 5-axis machine. Tedpfx Aep U Umkoltja

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Tjdpfx Alsuhv R Djtja Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: novo, Table diameter: 2000 mm Table load capacity: 10,000 kg Swivel range: 0 - 130 degrees Rotational speed: 0.02 - 0.2 rpm Height adjustment: 1450 - 2200 mm Torque at the faceplate: 20,000 Nm Motor power: 1.5 / 2.0 kW Todpfx Alofv Ay Istoa Welding current: 1000 amps - Manual height adjustment. - Self-locking gearbox, which means minimal overshoot and undershoot even with off-center loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, infinitely variable rotational speed of the turntable. - High stability due to robust construction. - CE certificate. The D-HBE series is supplied as standard with a cable remote control and a foot switch.