CNC stružnica

CMZ TTL66

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Krmilnik Fanuc, Nwjdpjycwwwofx Adyeb prehod vretena 66 mm, dva revolverja, dve Y-osi, proti vreteno, prijemalo za dele, kratki podajalnik, visokotlačne črpalke, nosilci orodij

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, SIEMENS 840D SL control system Travel paths: 550 x 320 x 420 mm Swiveling milling head: +100 / -10° Spindle taper: HSK A50 Spindle speeds: up to 12,000 rpm Tool changer: 64 positions Rotary spindle: 4,500 rpm NC swiveling rotary table with B and C axes Nedowwundjpfx Adyjwb Tool breakage monitoring Tool length measuring device 3D probe Various accessories MARCELS MASCHINEN CH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Nwjdexmhdnopfx Adyjb The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Nedpfsx D Ei Asx Adyewb Znamka: FANUC Glavni pogon Število osi: 3 Ta troosni CMZ TTL-66-66-TTY-T2Y je bil izdelan leta 2021 in omogoča napredno horizontalno struženje. Stroj je idealen za zahtevna in natančna kovinsko-obdelovalna dela ter zagotavlja učinkovito proizvodnjo zaradi robustne zasnove in sodobne tehnologije. Če iščete stroje z vrhunskimi stružnimi zmogljivostmi, razmislite o stroju CMZ TTL-66-66-TTY-T2Y, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2019, številka stroja/vozila: XD-38II-CP-0703-H, premer struženja nad prečnim suportom: 38 mm, največja hitrost vretena: 6.500 obr/min, premer struženja: 38 mm, izvrtina vretena: 39 mm, moč: 7,5 kW (10,20 KM), The machine can be inspected at our location in Immendingen by prior arrangement. Included are the original chip conveyor and a FMB 3-36 turbo bar feeder. Also included: Büchele SFB-301 high-pressure unit, 150 bar, 4 valves. Nedpfx Aevtmaledyjwb

Stanje: rabljeno, Article: Clamping heads Brand: Various manufacturers Nsdpfx Ajn H Nzuedyewb For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email (at) or *

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Nodpfx Aow An Uhodyjwb Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 720 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, največja hitrost vrtenja: 15.000 obr/min, General Spindle: Direct drive Speed: 15,000 rpm Power: 34 kW Torque: 180 Nm Tool holder: SK 40 Tool changer: 90 stations Nwodpfx Ajtpm Niodysb Working Area Travel X: 720 mm Travel Y: 600 mm Travel Z: 500 mm Rotary/tilting table: D = 700 mm Table load: 350 kg C-axis resolution: 0.001 degree Other Rapid traverse X/Y/Z: 36 m/min Max. rotary speed B-axis: 25 rpm Max. rotary speed C-axis: 25 rpm Equipment Chip management: Chip conveyor Coolant supply: ICS 40 bar Workpiece measurement: Renishaw OMP 40 Tool measurement: BLUM laser bridge Software: Kinematic Optimizer

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Nwodpfst Uw Avjx Adyjb Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Turning diameter: 38 mm Item: CNC Turning Machine Make: Hanwha Model: STL38H Year of manufacture: 2013 Nedstv Sdfspfx Adyswb Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z1 travel: 320 mm; synchronous running guide bush unit; guide bush type: JBS or SL38; collet type: 173E / F48 Sub spindle: Max. pick-off diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z2 travel: 320 mm; collet type: 171E / F42 Turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; servo axes: X2, Y2, Z2; stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or *