CNC center za struženje in rezkanje
CMZ TTL - 66 - 66 - T1Y - T2Y

Leto izdelave

2021

Stanje

Rabljeno

Lokacija

Idstein

CNC center za struženje in rezkanje CMZ TTL - 66 - 66 - T1Y - T2Y

Prikaži karto

Podatki o stroju

Opis stroja:: CNC center za struženje in rezkanje

Proizvajalec:: CMZ

Model:: TTL - 66 - 66 - T1Y - T2Y

Leto izdelave:: 2021

Stanje:: skoraj kot novo (rabljeno)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Walramstrasse 27, 65510 Idstein, Deutschland

Klic

Podrobnosti ponudbe

ID ponudbe:: A20256875

Nazadnje posodobljeno:: dne 10.10.2025

Opis

This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW.

The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret.

A 35-bar high-pressure coolant system with filtration and an additional tank is included.

Please refer to the attached brochure for further details or contact us directly.

Equipment:
- LPS for left spindle
- Reduction tube for left spindle
- Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle
- Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle
- Tool presetter
- Side chip conveyor (standard version)
- Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter
- Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter
- Coolant washing nozzle
- TA/06000/10 coolant chiller, 8000 W
- Machine status light
- Tool life management
- Tool load monitoring
- Programmable automatic part catcher (pneumatic)
- The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically)
- Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor
- Coolant supply through right-hand spindle
- Interface for bar loader (unimag)
- Preparation for extraction unit, connection flange Ø100

The machine is supplied with chip conveyor, coolant unit and tool package.
Godpfxsxmhdnj Adxjtt

It can be inspected under power and is available immediately.
Operated in single-shift mode only.

Further information available on request.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Dokumenti

20256875-01.pdf

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2006

35 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 6126 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Univerzalni obdelovalni center Deckel Maho DMU 80 monoblock

Kaufungen

694 km

Univerzalni obdelovalni center
Deckel MahoDMU 80 monoblock

Klic

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Gsdpfx Adsxa Eudjxstt Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje

Poglej podrobnosti

Mali oglas

Francija

984 km

CNC stružnica
Mori SeikiNL2500Y

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, CNC krmilnik: M720BM Kapaciteta Pomik X-osi mm: 260 Pomik Y-osi mm: ±50 (100) Pomik Z-osi mm: 795 Dolžina struženja mm: 705 Godpfxsxcqz Ie Adxjtt Maks. premer struženja mm: ø 356 Premer nad posteljo mm: ø 923,8 Premer nad prečno desko mm: 755 Kapaciteta za obdelavo palic mm: 80 C-os stopinje: 0,001° Zgornji revolver Število orodnih mest: 12 Hitrost pogonskih orodij vrt/min: 6.000 Pogonska moč pogonskih orodij kW: 5,5/3,7 (3 min/kont) Čas indeksiranja s: 0,25 Glavno vreteno Hitrost vretena vrt/min: 4.000 Pogonska moč vretena kW: 18,5/15 (25% ED/kont) Premer izvrtine vretena mm: ø91 Konjiček Pomik konjička mm: 734 Držalo: MT5 Oprema Transporter za odrezke Roka za merjenje orodja

Poglej podrobnosti

Mali oglas

Hornberg

560 km

Avtomatska stružnica
TraubTNL20

Klic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Gsdpfjwuddvox Adxjtt Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Poglej podrobnosti

Mali oglas

Olching

360 km

3-osni obdelovalni center
AxonVMC1060

Klic

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 650 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC640, Technology: Direct drive Spindle speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 stations Working Area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Other Features Rapid Traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Gsdstpm Stjpfx Adxstt Control cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Poglej podrobnosti

Mali oglas

Boxmeer

900 km

Grelnik
RadsonMixed lot 550 pieces

Klic

Mali oglas

Obdelovalni center - univerzalni DMG MORI DMC 340 U

Nemčija

650 km

Obdelovalni center - univerzalni
DMG MORIDMC 340 U

Klic

Stanje: rabljeno, Leto izdelave: 2019, x-axis travel: 3,400 mm y-axis travel: 3,400 mm z-axis travel: 1,600 mm Control system: CELOS 840D sl Op Siemens Max. spindle speed: 20 – 15,000 rpm Main spindle drive power: 52 / 42 kW Tool holder: HSK-A100 Max. torque: 404 / 280 Nm Tilting range B-axis: -30° / +180° Table dimensions: 2,500 x 2,000 mm Max. table load: 10,000 kg Table rotation speed: 5 rpm Distance spindle center to table, horizontal: 130 – 1,730 mm Distance spindle center to table, vertical: 230 – 1,830 mm Distance spindle nose to table, horizontal: -1,500 – 1,900 mm Distance spindle nose to table, vertical: -1,600 – 1,800 mm Type: 5x rotary / wheel Number of tool positions: 303 Max. tool diameter: 110 mm Max. tool diameter with free adjacent pocket: 280 mm Max. tool length: 900 mm Max. tool weight: 45 kg Tool change time: 7.5 sec Tool holder: HSK-A100 Gjdpfx Adex H Tt Dexjtt Rapid traverse: 60 / 30 / 40 m/min Total power requirement: 140 kVA Machine weight: approx. 106 t Space requirement: approx. 14.0 x 13.0 x 7.0 m 5-axis CNC large universal machining center DMG MORI - DMC 340 U - 2-position pallet changer - Precision package - MDynamics package (improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Taper cleaning station with rotating brushes - Balluff tool identification - Machine protection through rapid shutdown (MPC) - Laminated safety glass window - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with monitor at control panel

Poglej podrobnosti

Mali oglas

Thurmaston

1.368 km

CNC stružnica
DOOSANPuma 480D

Klic

Stanje: dober (rabljeno), Leto izdelave: 2014, 900 mm premer vrtenja, 650 mm maksimalni obdelovalni premer, Gjdpfxswwtrbe Adxett 992 mm maksimalna dolžina struženja, vreteno do 1000 min⁻¹, premer izvrtine vretena 275 mm, revolver z 10 postajami, vretenski motor 45 kW, krmilje FANUC Series 32i, močanske vpenjalne glave s 3 čeljustmi, konjiček, transporter za odrezke, hladilna naprava,

Poglej podrobnosti

Mali oglas

Obdelovalni center - univerzalni DECKEL MAHO DMC 100 U duoBLOCK

Oelde

802 km

Obdelovalni center - univerzalni
DECKEL MAHODMC 100 U duoBLOCK

Klic

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Godpfx Aowf Rgfodxjtt Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Poglej podrobnosti

Mali oglas

CNC center za struženje in rezkanje Gildemeister CTX 320 linear V 3

Kirchheim bei München

332 km

CNC center za struženje in rezkanje
GildemeisterCTX 320 linear V 3

Klic

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Gedpfx Asv Drigsdxstt Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Poglej podrobnosti

Mali oglas

Obdelovalni center Droop & Rein Modimill

Schloß Holte-Stukenbrock

789 km

Obdelovalni center
Droop & ReinModimill

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.400 mm, pomik osi Y: 2.850 mm, pomik po osi Z: 1.000 mm, dolžina podajanja os X: 20.000 mm, dolžina pomika po osi Y: 30.000 mm, dolžina podajanja os Z: 20.000 mm, Droop & Rein Modimill, year of manufacture 2001, Fidia C20 Gtsdpfxjvk Ubxj Adxot

Poglej podrobnosti

Oglašujte tukaj