Odrezovalna žaga

CIMAN - ITALY MATA 450

Stanje: dober (rabljeno), vrsta goriva: dizel, dvižna višina: 17.600 mm, konfiguracija osi: 4x4, Leto izdelave: 2012, obratovalne ure: 3.785 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Unladen weight: 11,010 kg Engine make: Perkins Lifting capacity: 4,000 kg CE marking: yes Technical condition: good Visual condition: good Transport dimensions (L x W x H): 6.30 m / 2.42 m / 2.50 m Contact Tobias Mayr for further information. = Additional options and equipment = - Pallet fork - Additional hydraulics = Notes = Manitou 17.55 m telescopic handler from German rental fleet Manufacturer: Manitou Model: MT1840 E3 Year of manufacture: 2012 Operating hours (read): 3,785 hours Net weight: approx. 11,010 kg Max. lifting height: approx. 17.55 m Max. side reach: 13.08 m Max. load capacity: 4,000 kg Perkins diesel engine All-wheel steering with 3 steering modes Joystick control with pallet fork Road registration: 20 km/h Crjdpfx Apsynrmdeleb Dimensions (L x W x H): 6.30 m / 2.42 m / 2.50 m Other: Affordable Europe-wide delivery possible. Viewings by appointment only. Trade-in of your equipment / construction machinery possible. We are happy to offer you a customized finance or leasing solution (for business customers only). If you have any questions, please contact us. All prices ex location 86684 Holzheim. All information is subject to change. Alterations, printing and transmission errors, and prior sale are reserved. All details regarding color, equipment, condition, features, etc. of the vehicles offered are non-binding. Subject to typing errors/mistakes/prior sale.

Stanje: rabljeno, Leto izdelave: 1997, Dimenzije tračne žage: 3150 x 25,4 x 0,9 mm Cedpfxoyyc A Ij Aplorb 2 hitrosti: 20/40 m/min Rezanje pri 90 stopinjah: okroglo 260 mm Rezanje pri 90 stopinjah: kvadratno 250 mm Rezanje pri 90 stopinjah: ploščato 320 x 200 mm Rezanje pri 45 stopinjah: okroglo 230 mm Rezanje pri 45 stopinjah: kvadratno 210 mm Rezanje pri 45 stopinjah: ploščato 240 x 200 mm Dodatki: -Set tračnih žag

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left Cedpexaagbefx Aplsrb * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 250 mm Cutting capacity at 90°: flat 380x250 mm Cutting capacity at 45° left: round 260 mm Cutting capacity at 45° left: square 250 mm Cutting capacity at 45° left: flat 300x200 mm Cutting capacity at 60° left: round 180 mm Cutting capacity at 60° left: square 170 mm Cutting capacity at 60° left: flat 200x170 mm Cutting capacity at 45° right: round 240 mm Cutting capacity at 45° right: square 210 mm Cutting capacity at 45° right: flat 280x160 mm Saw blade dimensions 3770x27x0.9 mm Vice opening 385 mm Blade speed 40/80 m/min Total power 1.5/1.8 kW Weight 695 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic and manual functions. Equipped with MEP-30 control for mitre cuts from 45° right up to 60° left. The MEP 30 is the latest generation controller. Semi-automatic function: - Vice closes and motor starts - Saw head descends for cutting - Motor switches off - Saw head lifts - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Cycle start via push-button - Upper position is automatically stored Main features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic machine control with next-generation micro-controller - Electrical system centralised in the main control cabinet - Alarms, diagnostics and machine function display (cutting time, number of pieces cut, saw band motor load, saw head position, band speed, band tension) - Manual/semi-automatic/dynamic operation as standard Additional features: - Low-voltage control panel: polyester membrane keypad with thermoformed, raised buttons and confirmation control signal - Manual 24 V cycle selector handle, IP55 - Complete program with all special cutting cycles - New low-energy hydraulic control unit. Stand-by operation - 420 mm turntable mounted on roller bearings with preloaded thrust bearing, equipped with replaceable steel worktable - Saw bow stroke can be programmed directly from the control panel for adapting to the workpiece material Crsdpfxsyv Ntro Aplsb - Clamping device laterally adjustable left and right, with quick-release vice - Manual blade tension control with on-screen display via electronic transducer

Stanje: novo, Bandsaw blade dimensions: 4640x34x1.1 mm 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90°: square 320 mm Cutting capacity at 90°: round 330 mm Cutting capacity at 90°: flat 510x320 mm Cutting capacity at 45° left: round 320 mm Cutting capacity at 45° left: square 320 mm Cutting capacity at 45° left: flat 350x320 mm Cutting capacity at 60° left: round 230 mm Cutting capacity at 60° left: square 230 mm Cutting capacity at 60° left: flat 230x310 mm Cutting capacity at 45° right: round 320 mm Cutting capacity at 45° right: square 320 mm Cutting capacity at 45° right: flat 380x320 mm Cutting capacity at 60° right: round 250 mm Cutting capacity at 60° right: square 250 mm Cutting capacity at 60° right: flat 250x320 mm Total power requirement: 4 kW Weight: 1,190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control for miter cuts from 0° to 60° left. MEP 30 represents the latest generation of control systems. Semi-automatic operation: - Vice closes and motor starts - Saw head descends to perform the cut - Motor stops - Saw head rises – vice opens Key features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic control of the machine with new generation microcontroller Csdpfx Aoyv Nkkepljrb - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor load, saw head position, blade speed, blade tension)

Stanje: novo, Band saw blade dimensions: 2085x20x0.9 mm Cutting capacity at 90°: round 185 mm Cutting capacity at 90°: square 150x150 mm Cutting capacity at 90°: flat 220x150 mm Cutting capacity at 45° right: round 110 mm Cutting capacity at 45° right: square 100x100 mm Cutting capacity at 45° right: flat 110x90 mm Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70x70 mm Cutting capacity at 60°: flat 70x70 mm Voltage: 230 V Band saw speed: 30–75 m/min Vice opening: 230 mm Total power requirement: 2.35 kW Machine weight approx. 200 kg Space requirement approx. 1280x550x1480 mm The Zimmer Z185/R is a semi-automatic lowering saw designed for mitre cuts from 0° to 60° left. After the cut, the machine stops automatically via a safety limit switch. The feed rate is continuously adjustable via a hydraulic system. Manual lifting of the saw arm after the cut can be performed at any position; the saw arm will stay in the desired position. Equipment features: - Optional hydraulically controlled or manual saw arm feed - Saw arm swivels up to 60° to the right - Quick-release vice - Saw blade guide with 8 ball bearings Crjdsyv Nfzjpfx Apljb - Hydraulic band tensioning, tension indicator, and blade breakage cut-off - Including coolant system - Including machine base cabinet