Namizni rezkar

Casadei F250M

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Gkodpfxsdqzcxo Adkoa Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, rotational speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, with STBB HAB S chip container, including complete documentation. Gksdoi A Ix Hopfx Adkea

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: Werksüberarbeitungsnummer: WÜAF25T68109, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), največja širina rezanja: 1.000 mm, premer žaginega lista: 315 mm, dolžina rezanja (maks.): 3.200 mm, F25 Basic Equipment - Manual height and tilt adjustment (0 – 46°) of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at a single speed, 4,200 rpm - Double roller sliding table, table length 3,200 mm - Mitre fence, crosscutting up to 3,450 mm - Maximum saw blade diameter 315 mm, maximum blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment Package Type 6 - 5.5 kW (7.5 HP), 2 speeds Gkedpfxswwv Rmj Adkja - Rip fence, 1,000 mm - Riving knife (with extraction) - Scoring unit preparation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Gedpfxsx Sxfvs Adkska - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: generalkompletno obnovljen (rabljeno), 6-shaft moulder, with 22 cm feed table and grooved table for processing short pieces. Automatic left spindle: automatically adjusts according to the width of the workpiece. Motor configuration and power ratings: Godpfjvhbf Ssx Adkska Bottom spindle 5.5 kW Right spindle 4 kW Automatic left spindle 5.5 kW Right spindle 5.5 kW Top spindle 5.5 kW Lower spindle 4 kW Feed motor 4 kW Hydraulic unit for automatic left spindle 0.55 kW

Stanje: rabljeno, Technical specifications: Maximum planing width: 630 mm Maximum planing height: 250 mm Gksdpolp N Tyjfx Adkoa Cutterhead diameter: 120 mm Number of knives: 4 1 feed roller on the table Feed speed: 6–18 m/min Electric height adjustment Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1300 mm Width: 980 mm Height: 1120 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN ---- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: Gksdpfsyyqm Uex Adkea - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Stanje: novo, Spindeldurchmesser: 90 mm Sägeblattdurchmesser: 255 mm Schnittbreite: 1600 mm Godpfxsd Nluwe Adkska Schnitthöhe: 0–50 mm Motorleistung: 37 kW Drehzahl: 2800 U/min Vorschubgeschwindigkeit: 0–15 m/min Vorschubmotor: 3 kW Lieferzeit: ca. 3 Monate.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, volumenski pretok: 7.880 m³/h, filtrirna površina: 39 m², skupna višina: 2.816 mm, skupna dolžina: 3.999 mm, skupna širina: 1.367 mm, skupna masa: 1.550 kg, priključek za stisnjen zrak: 5 letvica, * Mobilni izpraševalec – visoko kakovostna sesalna tehnika za fleksibilno uporabo Gsdswku Iqjpfx Adkjka • Mobilni, robusten sistem za odstranjevanje prahu Primeren za notranjo in zunanjo uporabo – idealen za delavnice, gradbišča in začasna proizvodna območja. • Posebej stabilna in visokokakovostna konstrukcija Večje dimenzije kot običajne naprave – zasnovan za dolgotrajno, profesionalno neprekinjeno delovanje. • Edinstvenost: Mehansko-pnevmatsko čiščenje filtra ✓ Najbolj učinkovit način čiščenja na trgu ✓ Malo vzdrževanja, pogon na stisnjen zrak brez elektronike ✓ Najnižja poraba energije v primerjavi z običajnimi sistemi • Kompaktna, premišljena zasnova Omogoča enostavno povezavo z: o briketirnimi stiskalnicami o razbremenilnimi zaporami o posodami ali transportnimi sistemi • Pripravljeno za priklop – Plug & Play Brez potrebe po montaži – takoj pripravljeno za uporabo • Primerno za različne materiale Les, plastika, mešani prah in še več.

Stanje: dober (rabljeno), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m max. cutting height 100 mm Motor 12 kW total length 5.8 m total width 1.55 m Gkodpfx Aswumwfodkea