Rotacijski modul

Bosch Aventics

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine Pgsdpfohigmbex Agpsw LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Leto izdelave: 1972, Stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Pedpfsb Tdquox Agpegw Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Psdpfx Aehrnbkogpegw Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Leto izdelave: 1971, Stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Podpfx Agsd Ha E Sjpogw Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel Ø: 508 mm

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Pgedslp U D Topfx Agpjw Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Pgsdpfsfx Hv Hsx Agpjw Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: novo, TOVARNO NOVI VRTLJIVI MIZE Delovni položaj: vertikalno - horizontalno Uporaba: pozicioniranje - brezstopenjsko vrtenje // interpolacija Vpenjalna površina vrtljive mize Ø: 500 / 600 / 800 / 1.000 / 1.200 mm – površina za vpenjanje je lahko tudi kvadratna – Maks. teža obdelovanca (horizontalno): do 20.000 kg Maks. teža obdelovanca (vertikalno): do 4.000 kg Natančnost pozicioniranja: ± 3 kotne sekunde Vključevanje v stroje z HEIDENHAIN ali SIEMENS krmiljem. Podpem Tvz Dsfx Agpogw Odgovarjamo samo na povpraševanja iz Nemčije /// Obravnavamo samo povpraševanja iz Nemčije

Leto izdelave: 1980, Stanje: dober (rabljeno), Bandwidth: 1,650/1,750 mm Pjdedn I Hrepfx Agpsgw Band thickness: 0.4 - 3 mm Coil weight: 10 t Interchangeable mandrels, Ø: 304/406/610 mm

Stanje: rabljeno, Material width: 250 mm Material thickness: 2 - 4 mm Number of straightening rollers: 7 Pgjdjgbl Aaspfx Agpew Entry height: 1250 mm Strip feed angle, positive: 25° Strip feed angle, negative: 30° Total power requirement: 3 kW Machine weight: approx. 800 kg Space requirement: approx. [to be specified] m² The straightening machine has been disassembled, inspected, and subsequently repainted.

Leto izdelave: 1980, Stanje: dober (rabljeno), 5 (7) straightening rollers, Ø 160 mm Strip width: max. 1,750 mm Pgsdpjdnztwsfx Agpjw Strip thickness: 0.4 – 3 mm