Trak / izravnalnik

FROEHLING 1.750 x 3 mm

Leto izdelave: 2021, Stanje: skoraj kot novo (rabljeno),

Stanje: rabljeno, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed to manufacture door and wall panels up to 610mm wide with an annual output capacity of 1,500,000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Top Sheet Processing Section - 10 T top decoiler with coil car - Roller and pinch pass - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative pattern - Upper roller former (12 stands) - Upper forming mill steel frame - Upper sheet guide 2. Bottom Sheet Processing Section - 10 T bottom double decoiler with coil cart - Polyethylene film applicator - Corona treatment machine - Embossing machine - Bottom roller forming machine (12 stands) - Rolling conveyor - Entry line operator desk 3. Panel Formation Section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foam portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Discharge roller conveyor - Cutting saw - Soundproof cabin Hfsdevtpciopfx Adxob - Dust extraction unit - Operator control station 4. Stacking Section - Automatic panel tilting unit - Stacking conveyor - Outfeed conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Packing machine - Outfeed conveyor - Packing machine 5. Panel Production Equipment - Upper roller forming tools - Lower roller forming tools 6. List of Additional Machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m/min Thickness: 40-80 mm Maximum reel weight: 10 Tons Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 Hfodsip Uqmjpfx Adxob (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod drive mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Oil circulation lubrication Technical Data Max. press force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Clearance between uprights: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roller feeder VAMCO SP 150 Year of manufacture: 2014 Feed width: max. 150 mm Material thickness: max. 3.0 mm

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Hodpfefg E Hpsx Adxefb Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, stiskalna sila: 320 t, delovno območje: 4.100 mm, Naprodaj: Baykal Cnc Stiskalnica (320 ton, 4 metre) Proizvajalec: Baykal Kapaciteta: 4 metre x 320 ton Hfodpfx Adjvgc R Hsxeb Os: R in X os na zadnjem prislonu – 2-osni zadnji prislon Leto izdelave: 2022 Krmilnik: Esa S660W Opremljena z orodjem: Multi V spodnje orodje in segmentirano orodje Tehnične informacije: - Do 12 mm debeline pri 4 metrih / do 15 mm debeline pri 3 metrih - Upogibna moč: 320 ton - 5 osi - Dolžina upogiba (prek orodja): 4.100 mm - Dolžina upogiba (med okvirji): 3.550 mm Avtomatsko spodnje podpiranje in laserski sistem za merjenje kota z neposredno povratno informacijo CNC krmilniku za najbolj natančen postopek upogibanja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Technical Data: Maximum cutting width: 3100 mm Maximum cutting capacity with St40 steel: 15.0 mm Motorized adjustable back gauge: 1500 mm Motorized adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety guard with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t Hjdjummw Tjpfx Adxjfb We are only able to display a small selection of our current range of used machines here. Please also visit our homepage! The seller accepts no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Technical specifications: - Max. working width: 3030 mm - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending Hfedpfsmdqlljx Adxeb - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Hsdpfjhrnbkex Adxefb Without control cabinet.

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: Hodpohigmbofx Adxjfb High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Leto izdelave: 1972, Stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Hfedpfx Asb Tdqujdxeb Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t