Radialni vrtalni stroj

BOHRPOWER BOHRPOWER BPC 32/1000

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 152362081, globina grla: 2.700 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 9 obr/min, najv. debelina jeklene pločevine: 100 mm, premer vretena: 110 mm,

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Kedpeu Aa I Ssfx Abhsnd Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Knedpormkfnsfx Abhsd Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm Knsdpfsu Et Nbex Abhed - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Stanje: novo, Leto izdelave: 2025, zmogljivost vrtanja: 40 mm, globina grla: 1.220 mm, hitrost vretena (min.): 110 obr/min, največja hitrost vretena: 2.900 obr/min, skupna masa: 1.710 kg, pomik vretena: 200 mm, nosilec vretena: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Toolholder short spindle: MK 4 Swing (distance spindle center / column) min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / rev Knedpfxjtzkmbs Abhsd Main spindle speed range: infinitely variable 110 - 2900 rpm. Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power spindle motor 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Stanje: novo, The machine is supplied without a base. The BF3 Deluxe base is available separately under item number 56-1017. Technical data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill cutter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Quill travel: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head swivels: -60° to +60° Spindle to table distance: 95 - 485 mm Milling head vertical adjustment: 390 mm T-slot size: 14 mm Power feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT4 / B 16 - Drawbar M 16 - Reducing sleeve MT4 / 3 - Combination shell end mill arbor MT4 / 27 mm - Height-adjustable safety guard - Automatic quill feed - Power feed motor for milling head - LED machine lamp - Digital quill travel display - Thread cutting device Knsdov N Uyrepfx Abhed - Laminated protective cover - Longitudinal measuring scale - Operating tools Base not included

Stanje: rabljeno, Leto izdelave: 2007, x-axis travel: 4000 mm y-axis travel: 3000 mm z-axis travel: 2200 mm Control: Siemens Sinumerik 840 D Quill stroke: 800 mm Max. workpiece weight: 20,000 kg Tool holder: ISO 50 BIG PLUS, DIN 69871 Max. spindle torque: 2,346 Nm Knedpjw Sfkkefx Abhjd Spindle diameter: 160 mm Total power requirement: 65 kW Machine weight approx.: 50,000 kg Space requirement approx.: 12.8 x 11.8 x 5.7 m - Work table - Clamping surface: 2,500 x 2,000 mm - Table height above floor: 800 mm Feed rate - x-axis: 0.5 to 10,000 mm/min - y-axis: 0.5 to 10,000 mm/min - z-axis: 0.5 to 10,000 mm/min - Rapid traverse (x/y/z): 25 / 25 / 25 m/min - Max. feed force (x/y/z): 28,000 / 27,000 / 28,000 N Spindle speeds (rpm) - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3,000 rpm Tool magazine: - 306 positions divided as follows: Max. length 700 mm: 54 positions Max. length 450 mm: 54 positions Max. length 300 mm: 63 positions Max. length 200 mm: 135 positions - Max. tool weight: 35 kg - Tool diameter with free adjacent positions max.: 325 mm - Tool diameter without free adjacent positions max.: 105 mm Accessories: - Approx. 30x tool holders SK 50 - 1 probe - Coolant system / paper band filter & chip conveyor - Chiller - Oil mist extraction - Anchoring elements - Documentation

Stanje: dober (rabljeno), Leto izdelave: 2007, Krmilje 840 D x-os 2500 mm y-os 2500 mm z-os 1700 mm Krmilje - Siemens Sinumerik 840 D maks. teža obdelovanca - 6000 kg Premer vretena - 130 mm Hod pinole - 700 mm Vpenjalo orodja - ISO 50 DIN 69871 - AD Kodpswzyp Usfx Abhsnd maks. navor na vretenu - 1847 Nm Skupna potrebna moč - 65 kW Teža stroja ca. 45 t Prostorska zahteva ca. 10,9 x 9,3 x 5,7 m

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Kjdpfou Dg D Aox Abhend Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1988, Rapid Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (full hole): 40 mm Knodpfsikvcajx Abhed Throat depth (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speed ranges: 2 Tool taper: MT 4 SPECIFICATIONS Table surface: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Supply voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHTS Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Motor power: 6 kW