Hitrotečna radialna vrtalna HSK40

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Lajdsrn Riqopfx Adrji Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC 530, CONTROL SYSTEM .. CNC control: HEIDENHAIN iTNC 530 WORKING AREA - CUBIC - .. Number of machining axes (excluding parallel axes): 5 .. X-axis travel: 1800 mm .. Y-axis travel: 2000 mm .. Z-axis travel: 1100 mm TABLE .. Clamping surface (left-right): 1700 mm .. Clamping surface (front-back): 1400 mm .. Workpiece weight (max): 5000 kg SPINDLE / HEAD Laodpfx Adextiwcjrei .. Speed range up to: 10,000 rpm .. Tool holder: HSK A100 .. Drive power S6 40%: 44 kW .. Drive power S1 100%: 32 kW TOOL MAGAZINE .. Number of tool positions: 100 ELECTRICAL CONNECTION DATA .. Connected voltage: 400 V .. Mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. Space requirement - left/right: 8400 mm .. Space requirement - front/back: 9000 mm .. Total height: 4200 mm .. Total weight approx.: 35,000 kg ADDITIONAL EQUIPMENT FOR DRILLING/MILLING .. Chip conveyor: yes .. Coolant system: yes .. Belt filter: yes .. Internal coolant supply (ICS): yes .. Fully enclosed work area: yes .. CE compliant: yes Equipment: - Infrared probe Heidenhain TS 641 - Coolant tank 900 l - ICS 40 bar through spindle center (AD) - Rotating viewing window - Electronic handwheel - 3D trajectory control Optional: - Hydraulic clamping system (Stark)

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Laodpjf Sqckjfx Adrji Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 152362081, globina grla: 2.700 mm, največja hitrost vretena: 1.800 obr/min, hitrost vretena (min.): 9 obr/min, najv. debelina jeklene pločevine: 100 mm, premer vretena: 110 mm,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Splošni podatki Teža stroja 25000 kg Lodpfx Ajwbw A Eodreai Krmilna enota Znamka MAZATROL Model MATRIX Glavni pogon Območje hitrosti vretena 12000 vrt/min Moč motorja vretena 26 kW Stožec orodja ISO 40 Pomiki Pomik po X-osi 630 mm Pomik po Y-osi 510 mm Pomik po Z-osi 560 mm Miza Zunanja dolžina 500 mm Zunanja širina 500 mm Nosilnost mize 500 kg Mediji Transporter odrezkov Da Ta 5-osni Mazak Variaxis 630-5X T je bil izdelan leta 2009 in nudi napredne zmogljivosti za zahtevna strojno-obdelovalna opravila. Idealen je za precizno strojništvo in zagotavlja zanesljivo delovanje. Premislite o nakupu tega vertikalnega obdelovalnega centra Mazak Variaxis 630-5X T. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 Lodpfxou Aa I So Adrjai CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Univerzalni rezkalni stroj Znamka: OPTimill Model: MT 50 Kataloška št.: 3336005 Stanje: Nov stroj Hodi: Lasdpfx Adsbnfxujrji - X-os: 580 mm - Y-os: 200 mm - Z-os: 340 mm Serijsko opremljen z: - 3-osni digitalni prikaz DPA 31 PLUS - Avtomatski pomik v osi X - Dolg rezkalni trn 16 mm - Dolg rezkalni trn 22 mm - Vpenjalna glava B 18 - Zobata vrtalna glava 3-16 mm/B 18 - Redukcijska puša MK 2 z izmetno režo - Redukcijska puša MK 3 z izmetno režo - Strojna svetilka - Hladilni sistem - Orodje za upravljanje - Navodila za uporabo

Stanje: novo, MACHINE À FRAISER DE TYPE T ENTIÈREMENT NEUVE SUR BÂTI Commande numérique HEIDENHAIN TNC 640 Pack HEIDENHAIN (Moteurs, systèmes de mesure et poignée manuelle électronique) Axe X : 4 000 mm Lodpfx Ajq I Nkbedreai Axe Z : 1 500 mm Axe Y (transversal/ram): 1 300 mm Axe V (transversal/colonne): 1 000 mm Table rotative (axe C): 2 000 x 2 000 mm Charge maximale jusqu’à 15 000 kg Tête universelle automatique pivotante 1° x 1° (option fixation broche Ø 210 mm) Nez de broche : SK50 DIN 69871/A Vitesse de broche : 6 000 tr/min (refroidie à l’huile) Puissance max. moteur broche : 53 kW ICV — arrosage interne — 36 bars Avances rapides X, Y, V, Z : 30 m/min Précision de positionnement : 0,020 mm Répétabilité : 0,010 mm Changeur d’outils automatique : 60 postes (changement vertical / horizontal) Convoyeur à copeaux à double tapis articulé (longitudinal) Carénage périmétrique (ouvert en haut) Seules les demandes provenant d’Allemagne recevront une réponse.

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Laedermkfnjpfx Adroi Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm Lodpfxou Et Nbj Adroai - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine