Obdelovalni center

BIESSE ROVER A 3.30 K3

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Gijdpswcyd Iefx Ad Asp Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Na voljo je CNC lesnoobdelovalni center Homag. Pomiki X/Y/Z: 4000mm (4200mm)/1235mm/182mm. Dimenzije stroja X/Y/Z: cca 8000mm/5500mm/2950mm. Obratovalne ure: cca 33.226h. Stroj je na terminalu občutljiv na dotik, laser pa ima težave pri prepoznavi obdelovancev. Vključno z rezervnimi potrošnimi materiali, hladilnikom ter različnimi vpenjali in sesalci. Dokumentacija je priložena. Možen ogled na lokaciji. Giedpfx Aoyddz Sjd Aop

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Gedpfx Aoxraimod Ajip Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working table: With vacuum pod supports Main spindle power: 12 kW Giodpfxowuz N No Ad Asp Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Gisdpfx Asgwbbqsd Asp Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a chip conveyor belt, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine we offer for sale. Contact us for more information. Working Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel supports and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops with 140 mm stroke, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops with 140 mm stroke, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, 140 mm stroke (2 left + 2 right), pneumatic system • 4 removable center stops, 140 mm stroke (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting support bars • 6 lifting support bars for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Processing Units and Configuration • C3-A1 configuration: • Device for fitting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for fitting units on a machining group with 5 interpolating axes (units can only be used when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center-to-center) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electrospindle or 15 kW 5-axis electrospindle (requires chip deflector device; requires flange for mounting units when using a 5-axis electrospindle; requires C-axis when using a standard electrospindle) Gijdpfx Adjx D H Hco Ajp Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electrospindles or one electrospindle plus one liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Lokacija zaloge: Stranka Gsdpfx Asxgfbqed Asip

Stanje: dober (rabljeno), Leto izdelave: 2009, Short Description of the Basic Equipment · Console table · Automatic console positioning · Three-stage clamping element · Laser positioning aid for vacuum clamps · Vacuum clamps Main spindle 15 kW C-axis with aggregate interface Interface for Flex5 aggregate 30-position chain tool changer Tool holder HSKF 63 Drilling head with 13 spindles WoodWop package for AV-PC Rack and pinion drive for X and Y axes Ball screw for Z axis Z-axis travel path 600 mm Travel speeds: Vector speed 113 m/min X and Y axes 80 m/min Z axis 30 m/min Free-standing electrical cabinet. Homag control system Homag Homatic CNC System NC 83 with PLC control Remote diagnostics / telephone modem Technical Data Max. workpiece length 4000 mm, each aggregate individually max. 1375 mm with pendulum operation Tool diameter 25 mm Individual 4175 mm / Pendulum 1550 mm Workpiece width all aggregates: front 1150 mm, back 1400 mm Workpiece thickness 40 mm Milling operation, tool diameter 25 mm front 1220* mm, back 1550 mm *Workpiece thickness 40 mm Console Table K Console length 1340 mm Side stop rulers Vacuum clamps Max. workpiece thickness 300 mm with standard clamp max. 120 mm with mechanical clamping elements & templates (customer-supplied) up to max. 80 mm with standard clamp Working height 960 mm, bottom edge of workpiece PM basic equipment Automatic console positioning Three-stage clamping element Main spindle 15 kW (12 kW in S1 operation) Frequency inverter Spindle with hybrid bearings C-axis with aggregate interface Interface for Flex5 aggregate Vertical spindles, high-speed Pneumatic, lowerable insertion stroke Two-stage clamping element for PM console Post edge clamping device Three-stage clamping element for PM console Saw aggregate D= 280 mm Drilling/milling aggregate 4 spindles for tool changer Lock case aggregate 2 Immediately available All information without guarantee Further technical data on request Individual tools can also be purchased at extra cost. The tools shown are NOT included in the basic price! Gisdpfx Ajyb Ndgjd Ajp

Stanje: rabljeno, številka stroja/vozila: 008365, Pozicija 1: Enostranski stroj za lepljenje robov BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Pozicija 2: Povratni transport za plošče BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Godpfox Swf Uox Ad Ajip

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min Gsdpfxjxy Tmne Ad Ajip · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.