Parna turbina-reduktor

BHS CINCINATTI AD 63T

Stanje: dober (rabljeno), The Bystronic glass cutting line for split belt dimensions (maximum 3300 x 2550 mm) Service / spare parts available from Hegla, who have acquired Bystronic Hjdpfot Et Icox Anpjw • 1 Bystronic tilting table KTR, serial no. E9801016-1, - Tilts via integrated hydraulic system, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table - Type: XYT 972, serial no. E980016-2 - Also capable of shape cutting, waste optimization, PC Terra - Maximum dimensions 3300 x 2550 mm - Glass thicknesses 2-15 mm - With belt conveyor • 1 breaking table with breaking bars and air cushion - Serial no. E980016-4

Stanje: potreben popravila (rabljeno), Leto izdelave: 2016, obratovalne ure: 90 h, Funkcionalnost: omejena funkcionalnost, vrsta goriva: dizel, moč: 44 kW (59,82 KM), nazivna moč: 44 kW (59,82 KM), neprekinjena moč: 44 kW (59,82 KM), neprekinjena (navidezna) moč: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not working, oil is entering the engine, and the oil pump needs replacement. Otherwise, technically maintained. Can be started upon request. An additional new fuel pump is included. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and sound-insulated canopy. Suitable for backup power supply or continuous use in industrial or construction settings. Technical specifications: Model: ETT-55E Operating hours: 90 hrs Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4-cylinder, water-cooled) Generator (alternator): WHI224D, brushless, with Automatic Voltage Regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 Speed: 1500 rpm Cooling: Water-cooled Fuel consumption: ~10 L/hour (at 100% load) Fuel tank capacity: 260 L (up to 8 hours of continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control & Equipment: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator management Protection against overvoltage, overload, and low oil pressure Sound-insulated canopy – reduced noise level Manual or automatic operating mode Application: The generator is suitable for: - Industrial enterprises, warehouses, production facilities Hsdpfexlngaex Anpew - Construction sites and mobile workplaces - Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution where a stable, uninterrupted power supply is required. If you have any further questions – please feel free to contact us.

Stanje: rabljeno, Leto izdelave: 2016, Overview The bottling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is configured for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still operational and can be inspected at any time by arrangement. The bottle washer and bottle unpacker can also be purchased separately. Technical Details Capacity: 2,500 bottles/hour Formats: Set up for 0.33l longneck bottles Filling temperature: 6°C Packaging: - 0.33l longneck bottles in 24-bottle cartons - 0.33l longneck bottles in 24-bottle modular crates Individual Machines / Line Components - New Glass Depalletizer | Füllmeister | Year: 2016 - Filler + Capper | H&K | VVF 14/3 | Year: 1966 Overhauled in 2016 with: - Pre-evacuation - New rotary ball joint - New stainless steel table - New electrical system - New stainless steel valve control cabinet - 0.33-liter format guiding set - Sihi vacuum pump - Seals on lifting cylinders and filling valves replaced in 2023 - Vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Unpacker | Joha | Year: 1982 - Packing head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | Year: 1983 - 12 bottles per row - Labeler | Krones | Vinetta | Year: 1999 - Type 480-6-3-180 - Labeling stations for back labels, front labels and neck bands - Each with three glue pallets and gripper sponges - Glue pallets, gripper sponges, and sponge roller at bottle outfeed renewed in 2023 - Krones Unipump-H glue pump with glue heating - Packer | Pexco | Year: - - 1 head for 24 bottles in modular crate - New electrical installation and overhaul in 2016 - Residual Liquid and Finish Control | Miho | LC2000 - Detection of residual caustic from bottle washer - Closure control for crown cork/metal - Incl. Silmo inspection screen for visual control of cleaned bottles Hsdol Hx Rpspfx Anpew - Crate Washer | Fleischer - For longitudinal cleaning of empty plastic crates - Module size: 300x400mm - Overhauled in 2016 - Compressor | Alup | Allegro 19-10 | Year: 2016 - Oil-free - 4,897 operating hours Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport/roller conveyor: overhauled with stainless steel frames and feet in 2016

Stanje: zelo dobro (rabljeno), Motor-driven NC rotary table Continuously adjustable rotary table (increment 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Hodpfxsfk R Tde Anpow Overall height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Leto izdelave: 1995, stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Pass-through opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Hodpfx Anelp U Nqspew Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Hedpfx Ansfupadjpsw Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump

Stanje: delavnici obnovljeno (rabljeno), BSTA 110H, z vpodom BBV 202/120 Mehansko obnovljeno. Možna predelava na CE. Hedpfxjizi Hmo Anpjw Kontaktirajte nas za ponudbo. Arhivska slika

Stanje: novo, Leto izdelave: 2022, NWC110 Cummins Engine Newpower Generator Agregát je nový, komplet s ovládačmi, nádržou na naftu, výfukom a batériami. Technické špecifikácie Motor: Cummins 6BTA 5.9-G2, 6-valec, vodou chladený Generátor: Newpower NW/N 110 Trvalý výkon: 80 kW / 100 kVA Maximálny výkon: 88 kW / 110 kVA Pripojenie: 4P istič, Hedoh U Nxfjpfx Anpjw (voliteľné zásuvky, voliteľný prepínač automatického prenosu..) Frekvencia: 50Hz Napätie: 400/230V Otáčky: 1500 ot./min. Nádrž na naftu: 8-10 prevádzkových hodín Rozmery (DxŠxV): 3000x1000x1745mm Hmotnosť: 1600 kg Monitorovanie siete, zvukotesné Náklad: - Celosvetová doprava vrátane vykládky je možná za príplatok - Aby sme mohli poskytnúť presnú cenu prepravy, pošlite mi dopyt s vašimi údajmi a vašimi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.600 mm, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 2.100 mm, dolžina podajanja os Z: 1.500 mm, skupna masa: 50.000 kg, hitrost pomika os X: 10.000 m/min, hitrost podajanja osi Y: 10.000 m/min, hitrost podajanja os Z: 10.000 m/min, največja hitrost vretena: 4.500 obr/min, premer vrtanja: 40 mm, dolžina mize: 2.100 mm, širina mize: 1.900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation on V axis: 1,600 mm Table travel, horizontal movement X axis: 3,000 mm Vertical movement Y axis: 2,100 mm Column approach travel (milling) Z axis: 1,500 mm Drilling slide tilting (resolution 0.001°) A axis: +30°/-15° Table rotation (resolution 0.001°) B axis: 360° Maximum feed rate for axes: 10,000 mm/min DEEP HOLE DRILLING SPINDLE ISO 50 AND MILLING Full section drilling diameter range: 5 - 25 mm Maximum drill bit diameter: 40 mm AXES OF MOVEMENT Maximum drilling depth in a single operation on V axis: 1,600 mm Table travel, horizontal movement X axis: 3,000 mm Vertical movement Y axis: 2,100 mm Column approach travel (milling) Z axis: 1,500 mm Drilling slide tilting (resolution 0.001°) A axis: +30°/-15° Table rotation (resolution 0.001°) B axis: 360° Maximum feed rate for axes: 10,000 mm/min DEEP HOLE DRILLING SPINDLE ISO 50 AND MILLING Full section drilling diameter range: 5 - 25 mm Maximum drill bit diameter: 40 mm Spindle speed (adjustable): 1 – 4,500 rpm Spindle power S1: 17 kW Spindle torque: 324 Nm Standard tool holder for drilling tools: Ø 25 x 70 mm Maximum internal spindle pressure: 120 bar Taper type: ISO 50 DIN 69871/A Coolant: YES ROTARY TABLE Rotary table dimensions: 1,900 x 2,100 mm Rotary table resolution (resolution 0.001°) B axis: 360° Table capacity in rotation: 20,000 kg T-slots: 22 mm OIL Hydraulic pump motor power: 4 – 7.5 kW Self-regulating oil pressure: 15 – 120 bar Self-regulating oil flow: 5 - 80 l/min Oil tank capacity: 800 – 1,000 L Cooled oil temperature: 25 – 32 °C Filtration grade: 16 micron MACHINE DIMENSIONS AND WEIGHT: Width x Length x Height: 7,000 x 7,900 x 4,700 mm (H) Hodpeywnr Nsfx Anpew Machine weight: 50,000 kg WORKING CHARACTERISTICS IN GUN DRILLING Maximum depth: 1,600 mm Maximum rotation speed: 4,500 rpm Minimum drilling diameter: 6 mm Maximum drilling diameter: 40 mm THREADING HEAD “IMSASISTEM” WORKING CHARACTERISTICS Maximum rotation speed: 4,500 rpm Maximum threading on C40 steel: M36 Machine complete with: • Remote electronic handwheel Heidenhain • 40-position ISO 50 tool changer magazine • Fume extraction system 4,000 m³/h • Center-through spindle air / oil • M24 threads on table side • Various tools and working equipment • Tool rack with various drill bits • User and maintenance manual and CE declaration of conformity

Stanje: skoraj kot novo (rabljeno), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Hsdjfz D Dnjpfx Anpsw Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg