Vodilno in vpenjalno vreteno stružnica

Bernardo Solid

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Nwjdpfx Ahoxl Tcme Isd Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feeds (42): 0.055 – 3.065 mm/rev Cross feeds (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control; the set speed is shown on a digital display • Hardened and ground gears and shafts, also in the feed gearbox • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • Central, user-friendly control for feeds and threads, with leadscrew and feed shaft • Gears are oversized, hardened, and precision ground • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low in vibration, meeting key requirements for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – through-hole diameter max. 150 mm • Travelling steady rest – through-hole diameter max. 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Foot pedal with brake function (CE compliant) • Coolant system • Frequency inverter • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial • LED machine lamp • Chip guard (rear wall) • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 – 1700 rpm Longitudinal Feed Range: (42) 0.055 – 3.065 mm/rev Cross Feed Range: (42) 0.025 – 1.386 mm/rev Metric Threads: (41) 0.1 – 14 mm Imperial Threads: (60) 2 – 112 TPI Quill Diameter: 60 mm Quill Travel: 130 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features: • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feed rod • Large-dimensioned, hardened and precision-ground gears • Simple, smooth, and precise adjustment of speeds and feeds • Rapid traverse (longitudinal and cross) standard to minimize idle times • One-piece, ribbed bed casting highly torsion-resistant and low-vibration for high-precision turning operations Scope of Delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm Njdeqwkd Uepfx Ah Iswd • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. passage Ø 150 mm • Follow (travelling) steady rest – max. passage Ø 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake, CE compliant • Foot pedal with brake function, CE compliant • Safety slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre Distance: 1500 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Spindle Speed Range (12 steps): 25 – 1700 rpm Longitudinal Feed Range (42 steps): 0.055 – 3.065 mm/rev Cross Feed Range (42 steps): 0.025 – 1.386 mm/rev Metric Threads (41): 0.1 – 14 mm Imperial Threads (60): 2 – 112 TPI Quill Diameter: 60 mm Quill Travel: 130 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight: approx. 1845 kg Features - Modern headstock bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including in the feed gearbox - Central, easy-to-use control for feed and threads with leadscrew and feed rod - Large-dimension, hardened and precision-ground gears - Simple, smooth, and precise adjustment of speeds and feeds - Standard rapid traverse (longitudinal and cross) to minimize non-cutting time - Machine bed cast in one piece, extremely torsion-resistant and vibration-damping, providing essential stability for precise turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. bore diameter 150 mm • Travelling steady rest – max. bore diameter 110 mm • Quick-change tool post with 4 holders Nedpfx Ahoxl Dyve Iewd • Safety guard for quick-change tool post • Motor with electromagnetic brake to CE standard • Foot pedal with brake function to CE • Overload clutch • Rapid traverse, longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear panel • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications • Distance between centers: 2000 mm • Center height: 230 mm • Swing over bed: 460 mm • Swing over gap: 690 mm • Swing over cross slide: 270 mm • Bed width: 300 mm • Spindle bore: 80 mm • Spindle mount: DIN 55029, D1-8 • Speed range (12 steps): 25 – 1700 rpm • Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev • Cross feed range (42 steps): 0.025 – 1.386 mm/rev • Metric threads (41): 0.1 – 14 mm Nwsdpfxexl Dzaj Ah Ied • Inch threads (60): 2 – 112 TPI • Quill diameter: 60 mm • Quill travel: 130 mm • Quill taper: MT 4 • Motor power: 5.5 kW (7.5 HP) • Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm • Weight: approx. 1995 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feedscrew • Large-sized, hardened, precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse in longitudinal and cross axes as standard for reduced non-productive times • One-piece cast machine bed, extremely rigid and low in vibration, ensuring high precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Follow rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Motor with magnetic brake according to CE standards • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse for longitudinal and cross travel • Change gears • 2 dead centers • Reducing sleeve • Thread chasing dial • LED machine lamp • Chip guard (rear) • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Nwodpfx Aexl Tcajh Iod Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1500 Pro Vario Technical Specifications Center Distance: 1500 mm Center Height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm Longitudinal feed range: (42) 0.031 - 1.7 mm/rev Cross feed range: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm Nwsdpfenfu Amox Ah Iod Inch threads: (60) 2 - 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1370 mm Weight approx.: 2050 kg Scope of Delivery 3-axis digital readout ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - max. pass-through diameter 150 mm Travelling steady rest - max. pass-through diameter 110 mm First fill with Shell Tellus 46 Face plate 450 mm Quick-change toolpost with 4 holders Safety device on quick-change toolpost Foot pedal with CE-compliant brake function Coolant system Frequency inverter Slip clutch Change gears Reducing sleeve 2 dead centers Thread dial indicator LED machine lamp Chip guard/rear splash guard Operating tools Rapid traverse longitudinal and cross

Stanje: novo, Turning length: 1000 mm Swing diameter: 460 mm Swing over cross slide: 270 mm Swing in gap: 690 mm Spindle bore: 80.0 mm Spindle speed: 25 - 1700 rpm Bed width: 300 mm Nsdpfx Aoxab H Ajh Iswd Spindle mount: DIN 55029 D 1-8 Tailstock taper: MT 4 Quill travel: 130 mm Total power requirement: 5.5 kW Machine weight approx.: 1675 kg Dimensions (L x W x H): 2300 x 1080 x 1600 mm Description: The Solid 460 Pro universal lathe is specifically designed for economical production of single parts and small series with high precision. Even the basic configuration includes all essential accessories, making this machine universally applicable. Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Face plate 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest, max. passage dia. 150 mm - Follow rest, max. passage dia. 110 mm - Quick-change toolpost with 4 tool holders - Safety guard for quick-change toolpost - Motor with electromagnetic brake to CE standard - Foot pedal with brake function to CE - Slip clutch - Rapid traverse longitudinal and cross - Change gears - 2 dead centers - Reducing sleeve - Thread chasing dial - LED machine lamp - Chip guard at rear - Operating tools

Stanje: novo, Turning length 1500 mm Swing diameter 460 mm Swing diameter over cross slide 270 mm Swing diameter in gap 690 mm Spindle bore 80.0 mm Spindle speed 25 - 1700 rpm Bed width 300 mm Spindle mount DIN 55029 D 1-8 Tailstock taper 4 MT Quill travel 130 mm Total power requirement 5.5 kW Machine weight approx. 1845 kg Dimensions L-W-H 2750 x 1080 x 1600 mm Description: The universal lathe Solid 460 Pro has been specifically designed for the economical production of single parts and small batches with high precision. The standard equipment already includes all essential accessories, making this machine exceptionally versatile. Scope of delivery: - 3-axis digital display ES-12 V with LCD screen - 3-jaw chuck PS3-250 mm / D8 - Face plate 450 mm - Coolant system - Initial fill with Shell Tellus 46 - Fixed steady rest – max. passage diameter 150 mm - Travelling steady rest – max. passage diameter 110 mm - Quick-change tool post with 4 holders - Safety device for quick-change tool post - Motor with electromagnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse longitudinal and cross - Change gears - 2 centres - Reducing sleeve - Thread dial indicator Nodpfx Ahexab Nqe Ijwd - LED machine lamp - Chip guard at the rear - Operating tools