Hladna krožna žaga

Berg und Schmid VKS 370 HA

Stanje: novo, Leto izdelave: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item no. 6020 Bdedpfx Ajfu Itbscmsc With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped in place, and drilled. All you need to do is press the start button. The positioning system’s horizontal gripper allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator via a handwheel with digital display. Benefits • Sequences of holes are drilled automatically at precise intervals. • Operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic version Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping range 200 mm) Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (technical data see datasheet) Anti-rotation device Motorized height adjustment Thread cutting device NC Positioning System PD 200p Feed force 200 kg Positioning in absolute or incremental (chain) dimensions possible Carriage with DC servomotor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack and pinion Steel carrier profile as contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting angles / Roller width 407 mm / Insert plates / Reinforcements / Roller diameter 50 mm / Steel rollers We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2023, Horizontal Bending Machine AH 40 - Manufacturer: ZOPF - With semi-automatic control - NC control unit - Includes bending pin - Includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely adjustable stroke setting - Adjustable working speed Max. working stroke: 10 mm/sec Return speed: 20 mm/sec - Adjustable hydraulic pressure - Max. tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed work table - Weight: 1000 kg - Bending capacities: Flat material: 150x22 mm Bdedpfeqvm Ukex Acmjc Round tube: up to 60 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy Bdjdpfjd Iipxsx Acmec - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 310 kg, Teža: 310 kg Mere: 900x700x1550(v) mm Moč motorja: 3 kW Polna kvadratna palica: 20x20 mm Polna okrogla palica: premer 20 mm Bdodpfx Acox I Rdismec Ograjna letev: 60x12 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, Trennjaeger TEBA 240 DG Round capacity: 240 mm Rectangular capacity: 230 x 230 mm Motor: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saw angles: 90° / -45° / +45° / +60° Cutting speed: 40 / 80 m/min. Bedpou Ekw Nefx Acmsdc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Bjdpfjg Ufvbsx Acmedc Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine Bdedpfsfu Ivzox Acmoc • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 051888, Used Automatic Circular Saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Removable pneumatic anti-burr vise. Pneumatic cylinder for the head movement, with brake for speed adjustment. Transmission with double expanding pulley for variable speed from 15 to 90 m/s. Pivoting head on adjustable self-lubricating bushings. 600 mm feeder stroke operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes, for a total feed length of up to 5400 mm. Maximum feeder clamp opening: 160 mm. Programmable piece counter. Minimum trim cut waste: 160 mm. Feeder speed adjustment valve. Ammeter. Reverse function. Emergency stop button and control panel lock switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Full safety guard designed for quick blade change. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Bdjdpfxjrfw Iko Acmoc Specifications: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Worktable height: 950 mm Weight: 420 kg

Stanje: dober (rabljeno), 1 used MIG/MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 – 400 Voltage range [V]: 15.5 – 34 Weldable wire – Steel [Ø in mm]: 0.6 – 1.6 Weldable wire – Stainless steel [Ø in mm]: 0.8 – 1.2 Weldable wire – Aluminium [Ø in mm]: 1 – 1.6 Weldable wire – CuSi [Ø in mm]: 0.8 – 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 – 400 Voltage range [V]: 20.4 – 36 Weldable electrodes [Ø in mm]: 1.5 – 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 – 83 Wire feed speed standard [m/min]: 1 – 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulation class: F Bdodjy Hfwnjpfx Acmoc Standard: EN 60974-01 Marking/Certification: CE, S Cooling system: gas-cooled / water-cooled Cooling performance (nominal, l/min): [kW] 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Stanje: novo, Digital technology: the NEOPULSE 400 CW is a three-phase pulsed MIG/MAG power source designed for heavy industry applications. Bodjmxkggspfx Acmsdc Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding welding tasks. Its intuitive and functional digital interface allows for easy adjustment of all welding parameters. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulose electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).