Škarje za pločevino Baykal HGL 3106 2021

Baykal HGL 3106

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock Machine Serial No.: 30603 Year of manufacture: 104/2024 Equipped as follows: - Swing-beam shear design - Upper blade: double-edged - Lower blade: four cutting edges - Designed for single and continuous stroke operation - Motorized blade gap adjustment - Motorized back gauge, 750 mm, with ball screw spindles, foldable, position-controlled via Fedjxgtq Topfx Afleft NC controller, CYBELEC, Model: CybTouch 8 W - Fixed angle gauge with scale and fold-down stop cam - Worktable with support plates and integrated balls - Front support arms (2 pcs) - Finger guard with light barrier - Lateral and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Paint colors: * RAL 7015 – Slate Grey * RAL 7035 – Light Grey * RAL 3003 – Ruby Red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-down devices: 17 pcs Strokes per minute: 20 Oil tank: 160 liters Usable back gauge range: 750 mm Back gauge drive motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Charmilles Millenium control system Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Fsdpfxjuuz Iij Afljft Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Leto izdelave: 1971, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 713406, -KOM 105- Offered here is a powerful high-performance grinding machine from Kehren & Co, equipped with a paper band filter system by FAUDI. This is a segment grinding machine featuring a vertical grinding spindle. The machine is fitted with two grinding tables/magnetic chucks, enabling pendulum machining operations. Fedog Nt A Eopfx Afloft Technical Data: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: Segment grinding Control system: Marposs Weight: 6,600 kg Paper Band Filter System: Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Year of manufacture: 1992

Stanje: rabljeno, Arbeitslänge: 5.500 mm Fjdpe Dvlijfx Afloft Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Vrsta stroja: CNC stroj za cilindrično brušenje Proizvođač: Fritz Studer AG Model: S22 Godina proizvodnje: 2010 Upravljački sustav: FANUC 31i-A CNC Osnova stroja: Granitan® S103 mineralni odljev Konfiguracija: Fiksna ravna brusna glava za vanjsko (OD) brušenje Automatizacija: Automatski sustav za utovar s integriranim FANUC robotom Razmak između centara: 650 mm Visina između centara: 175 mm Maks. težina obratka: 150 kg Maks. duljina obratka: 700 mm Maks. promjer obratka: 449 mm Promjer brusnog kotača: 610 mm Širina brusnog kotača: 160 mm Brzina brusnog kotača: do 3.200 okr/min Snaga vretena: 15 kW Tip brusne glave: fiksna ravna Pomak po X-osi: 310 mm Ffsdjwl Uvkopfx Afljt Pomak po Z-osi: 850 mm Maks. brzina po X-osi: 15.000 mm/min Maks. brzina po Z-osi: 30.000 mm/min C-os: Potpuna rotacija glave obratka Programsko sučelje: StuderWIN s FANUC 31i-A Dodatni softver: StuderGRIND Automatizacijska sučelja: Standardna sučelja za utovarivače i periferne uređaje Dodatna oprema: Rotacijski dreser, Heidenhain mjerne letve, razni učvršćivači

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Ffodpfxsxddvns Aflst Feeds stepless, facing: 0.3 - 120 mm/min Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 rabljeni vertikalni obdelovalni center Proizvajalec: Deckel Maho Tip: DMU 80 monoblock Leto izdelave: 2008 Krmiljenje: ITNC 530 Tehnične podrobnosti X-hod: 980 mm Y-hod: 630 mm Z-hod: 630 mm Krmiljenje: iTNC 530 Skupna moč: 10 / 15 kW Teža stroja pribl.: 9,5 t Dimenzije pribl.: 4 x 4 x 2,5 m Dodatne informacije Oprema: Elektronsko ročno kolo Način delovanja 4 Ročna zasučna glava za rezkanje Motorsko vreteno 12.000 min-1 SK 40 / Vpenjanje DIN 69872 32-pozicijski zalogovnik orodij Fiksna miza 1250 x 700 mm Transporter ostružkov Naprava za hlajenje Fjdsxa Eudjpfx Aflsft

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Technical Specifications: Working length: 4300 mm Distance between uprights: 3230 mm Pressing force: 400 tons CNC control: AMADA AMNC Ffjdpfx Aewl U Rhsflot Number of controlled axes: 5 CNC crowning Stroke: 350 mm Throat depth: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, around 30,000 operating hours The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and signs of wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Ffodpfx Aeu Ixwisflet Machine lighting Accessories: 1x driven tool In standard condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Fjdpfxjw Rl S Sj Afleft Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.