CNC rezkalni stroj

Bridgeport Interact 4

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Cedsrpi E Aepfx Afdjrd

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 Codotzf N Rjpfx Afdord - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 Crjdox S Edlspfx Afdjd - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Codpfx Afohlp D Njdord The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: rabljeno, Leto izdelave: 1984, premer struženja nad prečnim suportom: 1.600 mm, premer struženja: 2.000 mm, premer struženja nad ležiščem sani: 2.000 mm, stružna dolžina: 35.000 mm, teža obdelovanca (maks.): 63.000 kg, Centre Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of Manufacture: 1984 Tandem construction on one bed with left and right headstocks Mirror double tailstock on both left and right sides Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing and replacement Motorized tailstock for both left and right sides 3-bedway construction Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Credeynky Ajpfx Afdsd Field of application: Shipyards Propeller shafts Hydraulic cylinder shafts Camshafts Defense & Aeronautics Rolls and shafts for steel mills Crankshafts Specifications Metric US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 RPM Feed rate X-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Dimensions (estimated): Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1969, Višina konic: 355 mm Razdalja med konicama: 3000 mm Crjdpexpuu Ejfx Afdjd Maks. premer obdelave nad posteljo/izrezi/naklonom: 715/790/520 mm Vrtina vretena: 86 mm Sprejem vretena po DIN 55027: Vel. 11 Stožec konjička: MK 5 21 hitrost vretena: 5,6 - 560 min⁻¹ 42 podajalne hitrosti vzdolžno/prečno: 0,09 - 5,6/0,045 - 2,8 mm 22 Whitworth navojev: 2 - 28 Gg 28 metskih navojnih korakov: 1 - 14 mm 27 modulnih navojev: 0,25 - 3,5 modul 32 modulnih navojev: 4 - 56 modul 32 Diametral-Pitch navojev: 8 - 112 DP Pogon motorja, polpreklopni: 380 V, 7/11 kW Teža pribl.: 7 t Potrebna površina pribl.: 6000 x 2300 mm

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support Crodpfx Ajgn Tzlefded + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information

Stanje: zelo dobro (rabljeno), Tacchella Macchine grinding machine type 40LR in very good condition. Specifications: Crodpfx Afsivg E Hodsd Longitudinal travel X-axis: 400 mm Cross travel Y-axis: 250 mm Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimensions: 150x20 mm Weight: 800 kg

Stanje: rabljeno, Leto izdelave: 1976, Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 1000 mm Premer struženja v izrezu: 850 mm Število vrtljajev: 15 - 810 o/min Višina konic: 300 mm Vrtina vretena: 56 mm Skupna potrebna moč: 9,0 kW Teža stroja pribl.: 2,9 t Crsdpfxow Tdxce Afdjd Dimenzije stroja pribl.: 2,8 x 1,45 x 1,65 m Stružnica z vodilnim in vlečenim vretenom - 3-čeljustna glava Forkardt F 315 - Enostavni držalo za orodje - Luneta - Vrtljiva konica - Zaščita glave, nadzorovana s končnim stikalom - Kad za odrezke

Stanje: novo, Leto izdelave: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roll Cjdpfshgiuhjx Afderd Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.