AVTOMATSKI OKROGLI STROJ ZA ČEPENJE

BALESTRINI 2/TAO + 2/CAP

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Basic equipment: - Electromotive height and tilt adjustment, 0–46°, with automatic correction of cutting height during tilting - Controls at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manually adjustable via scale, including manual fine adjustment, cutting width 1,000 mm - Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm - Saw blade projection: max. 150 mm - Max. saw blade diameter: 450 mm - Motor power: 4 kW (5.5 HP) at 4,000 rpm - AKE tool clamping system for main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Infinitely variable speed control from 2,000 to 6,000 rpm - Exact speed adjustment to the material increases cut quality and blade service life Extended cutting height for single-side tilting This option is for single-side tilting and comes with a large extraction hood for a max. saw blade diameter of 550 mm and a saw blade projection of max. 204 mm. In combination with a scoring unit, the max. saw blade diameter is 500 mm, respectively 179 mm cutting height. Only available with at least 5.5 kW (7.5 HP) motor power. 2-axis scoring unit for single-side tilting With electromotive height and lateral adjustment, programmable scoring blade height with quick lowering and raising, drive motor 0.75 kW (1 HP), 8,200 rpm. Retrofitting only possible on machines prepared for scoring unit installation. LED lighting Highly energy-efficient LED technology makes the hazardous area of the scorer clearly visible. Dusdpfxsw I Uxcs Af Sjr The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be infinitely locked in any position. The large double rollers, precision-manufactured from hardened steel, ensure perfect guidance of the top carriage to the bottom carriage via hard-chromed guide rods. This running quality is maintained even under decades of operation and exposure to dust. The carriage is built as an extremely torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, integrated flush with the top carriage, serves as a support for the cross-slide and as an interface for various accessories. The complete unit is low-maintenance and does not require lubrication. On/off switch on the double roller carriage The on/off switch is always within easy reach on the double roller carriage. With four buttons, both the main saw blade and the scorer can be switched on and off, saving steps and increasing safety. Angle mitre fence, cross cuts up to 3,500 mm This ALTENDORF-patented fence with integrated length compensation makes precise angle and mitre cuts in one operation much easier. In both positions, the swivelling angle is infinitely adjustable up to 49° and displayed via scale. The play-free and robust stop flaps can be easily shifted and set as individual flaps across the entire range up to max. 3,500 mm.

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden. Dedodnxydepfx Af Ssur

Stanje: novo, Leto izdelave: 2026, Engine power 5 HP Blade diameter 250 mm Blade speed (rpm) 5300 Automatic pneumatic movable table Galvanized iron and polyethylene supports √ Maximum horizontal cutting length 4200 mm Maximum vertical cutting height 2200 mm Maximum horizontal cutting height 2080 mm Dusdpfx Afou Rqq Hs Sor Maximum cutting depth 60 mm

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each Duedpfx Ajwt Snysf Ser

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via frequency inverter Memory system Pneumatic pressure units divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber feed rollers 1 roller on the table driven by cardan shaft Infeed table length: 1,980 mm Dusdpfx Aothk T Isf Sjr Working tables made with Marathon Coating technology CE certificate Suction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Djdsfg Rlcjpfx Af Ssur Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: rabljeno, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm Djdpfx Afewgwlke Sjur * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Dujdpfx Afjrigxyo Sor Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ESS B2 - *M 0--.10*, Star screen for screening materials such as soil, compost, wood chips, etc. Weight: 2,700 kg. Selectable screening size from 12 to 40 mm. Connection: 3-phase 400 V, 32 A, frequency 50 Hz, total power 11.25 kW. Throughput: 40 to 60 m³/h depending on material and screen size. Dodpeirnrpsfx Af Seur Delivery time: approx. 14 weeks after order confirmation.

Leto izdelave: 2026, stanje: novo, Fully automatic horizontal packaging machine SPINNER 1800s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - right-hand side in the direction of product flow General technical data: - Main motor output: 3 kW - Max. ring speed: 40 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: Dsdpfx Afjfzrhds Ssur - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch clamp and cutting system - Photoelectric sensor for automatic start of the wrapping cycle - Touch screen for adjusting machine parameters to product requirements - Operator safety systems Optional equipment: - Various sorting conveyors - Infeed and outfeed roller tables - Air bubble film unit Technical features: Wrapping dimensions: - Max. length: unlimited - Min. dimensions (WxHxL): 600 x 450 x 1200 mm Conveyor belt features: - Usable length: 2,300 mm - Total length: 2,450 mm - Working height: 950 mm - Electric motor output: 0.55 kW - Max. speed: 10 m/s - Max. load capacity: 100 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Roll core diameter: 76 mm - Recommended material thickness: 23, 30, 35 micron