Glavni hidravlični cilinder

Avermann AVOS 1410

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 47.624 h, Just arrived – more pictures and a video to follow Baler Avermann, Type AVOS 1410 BR5 – 45/80, Pressing force 80 t, Year of manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), variable length Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Note: The baler was dismantled from ongoing operation. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. More pictures available on request. Please contact us. Please note: All technical data are based on manufacturer's information. We do not accept any liability for the information provided or any possible errors. This offer is subject to change without notice, prior sale reserved and may be revoked at any time. Nsdpfx Aox Uzy Uog Teku Inspections possible by arrangement. Sale is ex works, prepayment only, without warranty or guarantee.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): Njdsx A U Ncopfx Ag Teku – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, skupna masa: 17.000 kg, lastna masa: 17.000 kg, Tehnični podatki: Avermann Maschinenfabrik GmbH & Co. KG Model: AVOS 1410 BS-22/50 Leto izdelave: 2000 Delovne ure črpalke: 25.000 ur Dimenzije dovodnega kanala: 1.400 x 1.000 mm Dimenzije bale: 1.100 x 750 mm (širina x višina), dolžina nastavljiva Pogonska moč: 22 kW Lastna teža: 17 t Zmogljivost: 5,5 t/uro Teža bale: odvisno od materiala, do 500 kg Nsdpfx Agjw N Hlqs Teku Navpično, štirikratno vezanje, popolnoma avtomatsko PLC krmiljenje: Siemens S7-1500 Dimenzije sestavljene preše: 8.610 x 2.400 x 3.835 mm (dolžina x širina x višina) Posebna oprema: Obrabi odporna tla iz HARDOX jekla Transportni trak ni priložen stroju. Dokumentacija: na voljo je celoten uporabniški priročnik. Ogled je možen po predhodnem dogovoru. Ne prevzemamo odgovornosti za tehnične podatke ali morebitne napake. Stanje preše: Zaradi rednega vzdrževanja je v delujočem stanju. Uporabljala se je izključno za baliranje papirja. Baler Avermann tip AVOS 1410 BS-22/50, vključno s postajami za vlečenje žice in žlebom za bale.