Dvovretenski rezkalnik za lesene komponente

AUER BL-100

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 108111, Funkcionalnost: popolnoma funkcionalen, delovna širina: 240 mm, višina skobljanja: 160 mm, delovna višina: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Ledpfevrq U Dsx Abxsac

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Lasdpfx Asu Damdobxoc

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm Laodewvqklopfx Abxec • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.400 kg, Kompaktni stroj za razrez s mehanskim centrirnim dovodom, elektromotorji 2x75 kW in 2x90 kW; stroj je lahko opremljen z obrezovalnim blokom ter elektro omaro z frekvenčnimi pretvorniki. TEHNIČNI PODATKI Zgornji premer: 80–230 mm Maksimalni premer hloda: 350 mm Minimalna dolžina hloda: 2,4 m Višina prizme v Chipper Canterju: 60–232 mm Širina prizme v Chipper Canterju: 70–210 mm Hitrost linije: 70–150 m/min Dolžina sekancev: 20–30 mm Lsdpfxexfrmws Abxsac

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Four-Sided Planer Weinig Profimat 23 Fortec Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Lodpfeumxqrox Abxoac Feed speed adjustable via variator Drive via cardan shafts CE certified

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, največja višina reza: 120 mm, največja širina rezanja: 200 mm, moč: 16 kW (21,75 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine for machining components for modern log house construction, offering the perfect price-performance ratio for beginners, small-scale productions, or as an addition for special parts. Components are placed and positioned manually – after activation of the processing unit using the two-hand control buttons, the milling operation runs automatically. Optional roller tables and positioning stops are available to assist with the positioning of the components. Ljdpfx Abswnt Htexjac

Stanje: rabljeno, No. 3205 Copy Milling Machine Reichenbacher RMF Used For copying, enlarging, or reducing a model (wooden figure) A wooden blank (wooden figure) in the desired size is created Maximum clamping length: 1000 mm The machine requires a footprint of approx. 2500 x 2500 mm (L x W) Sale on behalf of a customer, ex location near 95485 Warmensteinach, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Description and price subject to error To avoid possible misunderstandings, a visit and inspection by appointment is possible and recommended Sale takes place in as-is condition Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Prior sale reserved Lodjv Hdg Nepfx Abxjac For used machines, any warranty is excluded; the following applies: 'purchased as inspected' Images and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: rabljeno, številka stroja/vozila: 008357, Največja širina panela: 4400 mm Največja dolžina panela: 4300 mm Največji izvlek glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 9 Ljdpfx Abox A Tk Eexoac

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Barberan machine from 2007. This Barberan PUR-33-L is a continuous profile wrapping line designed for the application of PVC foil, CPL, paper, and veneer to various substrates using hotmelt technology. It features a robust, one-piece, electro-welded steel frame, motorized rubber-coated feed rollers, and a slot-die extrusion system for precise adhesive application. If you are looking for high-quality wrapping capabilities, you should consider the Barberan PUR-33-L, which we have available for sale. Contact us for further details. • Base Frame: One-piece, electro-welded steel frame with high structural rigidity. Designed to absorb vibrations and maintain the alignment of the pressure rollers. • Transport System: Motorized, rubber-coated transport rollers with inverter-controlled speed to ensure precise synchronization between adhesive application and profile feed. • Press/Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot-die extrusion system with adjustable lips. • Working Width: 330 mm. • Adhesive Application Accuracy: Constant grams-per-square-meter distribution, independent of line speed. The closed system reduces oxidation, prevents premature PUR cross-linking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of adhesive film thickness. Lajdpfx Absym U Dioxoc • Type: 20 kg PUR drum melter with heated plate, melting only the uppermost layer to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with special seals to prevent ingress of air/moisture. • Pump: Integrated gear pump for consistent, pulsation-free adhesive delivery to the applicator head. • Function: Maintains working temperature of the adhesive during transfer from the melting unit to the slot-die head between approx. 120-150°C. • Length: 4.5 meters. • Technical Features: Internal PTFE (Teflon) core, resistant to high pressure and PUR. Includes uniform electric heating element to avoid cold spots, high-efficiency thermal insulation, integrated thermocouple, and temperature control via the machine’s PLC.

Stanje: pripravljen za uporabo (rabljen), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and noise protection ----- Full safety enclosure Lajdpfsxz Hh Uox Abxjc Easy high...