Stroj za zlaganje paletnih plošč

ARBOR PWPM-800-1200

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. Hnsdpfowclkysx Adkoi The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Hnjdpfx Adjd Szf Njkoi Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: novo, mit Hobelwelle Hoded H Sc Eepfx Adkjni Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: zelo dobro (rabljeno), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutterhead diameter: 120 mm Hedpfev Rv Dbox Adkeni Number of knives: 4 Feed speed: 6-12 m/min Manual height adjustment Extraction port diameter: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Zlagalnik paletnih desk PBS M4 – Avtomatski zlagalnik za proizvodno linijo palet Avtomatski zlagalnik paletnih desk, zasnovan za učinkovito integracijo v proizvodne linije za palete. Zagotavlja natančno poravnavo desk, stabilno zlaganje in visoko proizvodno zmogljivost z minimalnim ročnim rokovanjem. Vključen komplet: - Krmilni program - Zlagalnik z integriranim dvigalom Hnodpfx Aohhnbledkei - Razdruževalec desk - 2 dozirnika distančnikov z nosilnim ogrodjem - Izvozna transportna naprava z dvigalno ploščadjo - Dvigalo za pakete za enostavno rokovanje z viličarjem - Primerno za neprekinjeno industrijsko proizvodnjo paletnih desk.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Funkcionalnost: nefunkcionalno, Machines for restoration Hodpfslxqk Rsx Adkjni

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Hjdsk Talpspfx Adkeni Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation Hnsdpfx Adek Dpp Sekei - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Hidravlična lestev za okrogle hlode, primerna za premer hlodov od 7 cm do 66 cm. Hodsv N Eiqjpfx Adkjni

Leto izdelave: 2005, stanje: rabljeno, HIT mechanisation for KVH and glulam production For components up to 600 mm wide, 300 mm high, and 18 m long Consisting of various components, available individually or as a complete system: - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lifting tables, each with 2 cross conveyors mounted on transfer carts - Stacking machine - Control cabinets Hnjdpfjpiurmex Adksi - Roller tracks - Travelling timber crosscut saw with waste disposal system