Sistem za odsesavanje čistega zraka s stiskalnico za briketiranje

AL-KO Power Unit 250 P - BP

Stanje: novo, Leto izdelave: 2026, Engine power 5 HP Blade diameter 250 mm Gsdju Rqq Hjpfx Afwjua Blade speed (rpm) 5300 Automatic pneumatic movable table Galvanized iron and polyethylene supports √ Maximum horizontal cutting length 4200 mm Maximum vertical cutting height 2200 mm Maximum horizontal cutting height 2080 mm Maximum cutting depth 60 mm

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad Guodpfx Afok Dpp Sowsa - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: rabljeno, Leto izdelave: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of Manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with corner transfer Consisting of: 1. Infeed conveyor, length 3,050 mm 2. Open space for sanding machine (optional) 3. Automatic spray machine VEN SPRAY PERFECT, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. Jet dryer VEN DRY AIR JET, length 4,160 mm 6. 180-degree corner transfer with jet dryer 7. Supply air system for corner transfer, 25,000 m³/h 8. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 9. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 10. Jet dryer VEN DRY AIR JET, length 5,160 mm with 4 IR emitters 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Discharge area, belt of UV dryer Gujdpfx Afeu Afu Rewea 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 854 h, skupna širina: 2.450 mm, skupna višina: 1.100 mm, skupna dolžina: 1.900 mm, Lastna teža: 800 kg Cena: na zahtevo - Leto izdelave: 2017 - Dokumentacija na voljo: Ne - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 5037411-000150 - Obratovalne ure: 854 - Transportne mere: 1900mm x 2450mm x 1100mm (d x š x v) - Transportna teža [kg]: 800 kg - Transportni paketi [kos]: 2 Finančne informacije Gedjxan Utepfx Afwjua DDV: Navedena cena je brez DDV DDV/obračunavanje razlike v ceni: DDV je odbiten za podjetja Dostava in odkup so možni kadarkoli za vse stroje iz industrijske panoge Yorick Diebels

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Guedpfxovbtpj Afwja

Stanje: zelo dobro (rabljeno), Planer HA 4 Planing width: 450 mm Total table length: 2,500 mm Infeed table: 1,500 mm Machine height: 820 mm Gedpeinkfnefx Afwoua Maximum cutting depth: 15 mm Cutterhead speed: 4,800 rpm Motor power: 4 HP Weight: 660 kg Three-knife cutterhead

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 0 278 06 1192, širina folije: 700 mm, premer valja: 700 mm, Used roll slitting machine, make: Friz. One set of knives has been resharpened. The machine is pre-owned and is sold without warranty. Guedpfsv Radxsx Afwea Inspection is possible and encouraged. Loading facilities available.

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 RUWI Three-Spindle Under-table Router Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks, quickly delivering the desired result. Rapid tool changes are possible thanks to the conveniently accessible tool magazine. With the larger models, setup times are increasingly reduced. Costly and time-consuming fine adjustments and test milling are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the optimal working position. This model is ideally suited for workshop use and is often utilized for finishing. Made in Germany. Features and Technical Data: - High-quality construction - 3 tools available at any time Godpjrk Tqkofx Afwoua - Electronic speed control prevents RPM fluctuations under load - Robust and high-performance motor - Motor with overload protection - Temperature monitoring via PTC resistor - Soft start and inrush current limiter - Reverse feed thread above ball bearings reduces ingress of dust and debris - Fast tool change - Dust extraction above and below the table top - 1x fine adjustment - Including stop ruler - Including mounting kit for table extension - Convenient tool change from above - BG and wood dust certified Technical Data: - Table size: 640 x 500 mm - Table height: 910 mm - Variable speed control: 8,000 – 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial operation - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optionally 6 mm, 6.35 mm, and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: Short-term Location: Solingen

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood Gedpfxsv Si Szj Afweua 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: novo, Wood Briquetting Press Amis ABP 60 L - Ex-demonstration machine - ----- Technical Data ----- Briquette diameter: 60 mm, Hydraulic unit: 3 kW / 140 bar, Voltage: 400 V, Frequency: 50 Hz, Fuse protection: 16 A, Throughput approx.: 20-35 kg/h, Weight approx.: 300 kg - Extremely easy operation - Hydraulic control system - Briquette diameter: 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complex controls - Large feed hopper - Hardened briquette tongs - Replaceable press ram Guodou R Sxxopfx Afwsa - Pressing without the addition of binders - Thanks to the pre-compactor, even bulky shavings can be processed - No adjustments or pressure monitoring necessary - New ex-demonstration machine -