Generator dušika, tovarna dušika

Airtech Stickstoff GmbH -Parker NITRO-Source Plus

Stanje: novo, Leto izdelave: 2025, Parker-Airtech presents the latest generation of nitrogen generators, setting new standards on the market with an outstanding air factor. Our systems are characterized by the exclusive use of high-quality components, ensuring both durability and reliability. The cost-effective operation of the system is marked by low energy consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, and premium, long-lasting components. This enables rapid return on investment for the system. An intelligent monitoring system allows continuous surveillance of operational parameters, ensuring you are always informed about the status of your unit. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to maintain full control over your nitrogen production at all times. The system is customized to your individual requirements. Parker-Airtech is dedicated to providing you with the best technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance—choose Parker-Airtech. Chodpfx Aiewzv Hcoqoc

Stanje: novo, Leto izdelave: 2026, skupna masa: 400 kg, * 250 L neto prostornina * Dovajalna (dozirna) črpalka vključena Csdeh I N Udepfx Aiqshc * Visoko odporna poliuretanska obloga (90 Shore) * Visokozmogljiv trifazni pogonski motor * Zamenljiv ventil za izpust odpadne vode * Glavno stikalo in stikalo za zasilno zaustavitev * Časovnik in števec delovnih ur * Posebna izvedba krmilne omare (v skladu z EU standardi) vključena

Stanje: novo, Leto izdelave: 2025, Parker-Airtech presents the latest generation of nitrogen generators, setting new standards on the market with an outstanding air factor. Our systems are characterized by the exclusive use of high-quality components, ensuring both durability and reliability. Chedpfonq Dkijx Aiqsc The cost-effective operation of the system is marked by low energy consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, and premium, long-lasting components. This enables rapid return on investment for the system. An intelligent monitoring system allows continuous surveillance of operational parameters, ensuring you are always informed about the status of your unit. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to maintain full control over your nitrogen production at all times. The system is customized to your individual requirements. Parker-Airtech is dedicated to providing you with the best technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance—choose Parker-Airtech.

Leto izdelave: 2025, stanje: novo, Parker-Airtech presents the latest generation of nitrogen generators, delivering exceptional performance on the market thanks to an outstanding air factor. Our systems are distinguished by the exclusive use of high-quality components, ensuring their durability and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, as well as high-quality and long-lasting components. This enables a very short payback period for the system. Chsdowzv Hiepfx Aiqec An intelligent monitoring system provides continuous supervision of all operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to retain full control over your nitrogen production at all times. Each unit is customized to your specific needs. Parker-Airtech is committed to offering you the best technologies to optimally support and enhance your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Stanje: novo, Leto izdelave: 2025, Automatic powder filling and lid sealing machine for small containers such as coffee capsules. - Suitable for filling powdery products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/forms (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) followed by sealing. Automatic filling and dosing using an auger filler. UV sterilization system, ionizer, and dust extraction system for the tray formats included. Automatic film feeding and dual heat sealing of the lid. Specifications: - Max. idle speed: 55 cups/minute - Filling range: 0-20g - Filling accuracy: +/- 0.15g - Hopper capacity: 5L (approx. 3kg powder) - Power supply and consumption: 220V, 1.5kW - Required compressed air and flow rate: 6-8 bar, approx. 300L/min - Protective gas flow rate: approx. 200L/min - Machine dimensions: L1900 x W1118 x H2524mm Chedpfsv Nkzxsx Aiqjc - Weight: 800kg. Specifications refer to Nespresso capsules; deviations may occur with capsules from other brands. Please note that our new prices are often below the usual prices for used machines. Feel free to send us your enquiry and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 600 h, moč: 0,011 kW (0,01 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 35 t, hod: 300 mm, obratovalna hitrost: 180 mm/s, hitrost vzvratne vožnje: 180 mm/s, širina mize: 60 mm, višina mize: 100 mm, razmak između stupova: 1.375 mm, skupna dolžina: 2.250 mm, skupna širina: 1.820 mm, skupna višina: 2.515 mm, skupna masa: 4.900 kg, proizvajalec krmilnikov: Lenze, model krmilnika: SafanDarley E-Control, delovna širina: 1.275 mm, upogibna sila (maks.): 35 t, zadnji prislon: 1.000 mm, hitrost zadnjega prislona os R: 150 mm/s, Razdalja pomika zadnjega prislona, os R: 150 mm, pomik zadnjega naslona os Z: 1.000 mm, razdalja med stojali: 1.375 mm, vrsta nastavitve višine: električni, vgradna višina: 1.000 mm, trajanje garancije: 12 meseci, vrsta upravljanja: CNC krmiljenje, število osi: 7, vrsta aktuacije: električni, Oprema: CE označba, varnostna svetlobna zapora, E-Brake Premium 35t-1250 je najhitrejša servo-električna upogljalna stiskalnica na trgu, proizvedena podjetja SafanDarley. Servomotorji Lenze, ki jih upravljajo frekvenčni pretvorniki istega podjetja, omogočajo hitro in zanesljivo delovanje sistema več tisoč delovnih ur. SAFANDARLEY E-Brake ima patentirano metodo prenosa pogona, ki se izvaja s pomočjo ojačanih pasov. Sistem valjev omogoča delovanje t.i. večbloknega ali večkolesnega sistema. Ta princip je znan že vrsto let, vendar pa je njegova uspešna uporaba v upogljalnih stiskalnicah SAFANDARLEY od leta 1995 povzročila, da je stiskalnica približno 30 % hitrejša od hidravličnih stiskalnic, tišja in okolju prijazna, poleg tega pa ni potrebno menjati olja. Parametri: Servo-električna upogljalna stiskalnica SAFANDARLEY, model E-Brake 35-1250 - Pritisk 350 kN (35 ton) - Hod bata 300 mm - Odprtina Q=690 mm - Natančnost zgornje prečke +/- 0,01 mm - Največja hitrost upogibanja 10 mm/s - Največja hitrost prstov 350 mm/s - Največji doseg prstov (tretja referenčna točka) 1000 mm - Priključna moč 11 kW - Širina stroja 2225 mm - Globina stroja 1820 mm - Višina stroja 2550 mm - Teža 4300 kg - Servo-električni pogon (brez hidravličnega sistema) SAFAN E-Control – numerični upravljalnik - dvojni 21-palčni barvni ločeni zaslon na dotik (spodnji del zaslona omogoča programiranje, na zgornjem pa si lahko ogledamo dokumentacijo v formatu PDF, datoteke DXF ali 3D vizualizacijo procesa upogibanja) - vrtljiv nosilec - tehnologija ELO Touch EC20 – 2D grafični program, dodatek za upravljalnik E-Control CNC osi: Y1, Y2 – CNC osi X – CNC os deltaX – CNC os R – CNC os Z1, Z2 – CNC osi Varnostna svetlobna pregrada – programirljiva svetlobna pregrada: Osnovna funkcija – varnost Funkcija delovanja pri prekinitvi – 1 cikel/2 cikl Možnost izklopa pregrade v varnem načinu Cjdpfxsr Axxzs Aiqshc Zgornji adapter WILA NSCL I HC, hidravlični zgornji objem orodja Miza Safan OBS/3, pritrditev spodnjih orodij tipa Wila/Trumpf ali Amada, širina mize 60 mm z utorom 13 mm Ergonomski paket: izrez v mizi za delo v sedečem položaju, ergonomske mize, ergonomska stolica E-Bend S – sistem za merjenje debeline pločevine z avtomatsko korekcijo potopa Stanje stroja je kot novo. Možnost ogleda in testiranja ter predstavitve na kraju samem – Sosnowiec. Vsaka naprava je predmet popolnega tehničnega pregleda in opravi testiranja kakovosti v pooblaščenem servisu SafanDarley.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Pritisk 85 t, Dolžina upogibanja 2050 mm, Razdalja med stebri 1750 mm, Krmiljenje DELEM, Hod 215 mm, Globina grla 410 mm, Skupna moč 13 kW, Teža 8.750 kg, Dimenzije stroja 3190 x 2100 x 2375 mm Cedpfxow Imq Ro Aiqshc

Leto izdelave: 1990, stanje: rabljeno, številka stroja/vozila: 9072492, Rated power: 100 kVA Reach: 500 mm Chodpfez H Dysx Aiqoc Electrode arm spacing: 330 - 500 mm Electrical connection: 400 V kW Required installation space: 700 x 1420 x 2000 mm Weight: 750 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, Ponujamo zelo dobro ohranjeni laserski varilni stroj TRUMPF TruLaser Weld 1000, letnik 2023, z malo delovnimi urami. Stroj je bil vsako leto servisiran pri Trumpfu. Zadnji servis je bil aprila 2026. Stroj je priključen na električno omrežje in je popolnoma opremljen z dvema vrtljivima osema. Programiranje poteka neposredno na stroju, brez programske opreme. Trenutno je stroj še vedno v proizvodnji. Dobavljivo avgusta 2026. Proizvajalec: TRUMPF Model: TruLaser Weld 1000 Leto izdelave: 2023 Za dodatna vprašanja ali informacije nam pišite ali nas pokličite. Chedpfey I Ak Ujx Aiqjc

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Material thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical details: • Length: 2400 mm • Width: 1200 mm Chedpfx Aijynbmmeqjc • Height: 200 mm • Weight: 920 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Improved corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Enhanced fatigue strength • Increased vibration resistance • Fine laser-engraved scale • Reinforcement by weld seams and ribs on the underside • Optimum working height of 820–865 mm • 6 height-adjustable support legs • Matching accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single unit after mechanical machining. In addition, they feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced with weld seams and ribs on the underside (see images). Furthermore, they undergo a 3-day gas nitriding process, which increases the tables’ corrosion resistance as well as their durability and vibration fatigue strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm; the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The illustrations do not depict the original size and are for reference only. Our welding tables are manufactured by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik." 3D welding table – 3D clamping systems – 3D precision welding table