Generator dušika

Airtech Stickstoff GmbH- Parker NITRO-Source Plus

Leto izdelave: 2025, Stanje: novo, Parker-Airtech presents the latest generation of nitrogen generators, delivering exceptional performance on the market thanks to an outstanding air factor. Our systems are distinguished by the exclusive use of high-quality components, ensuring their durability and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, as well as high-quality and long-lasting components. This enables a very short payback period for the system. Ffedpfx Afenq A U Aelst An intelligent monitoring system provides continuous supervision of all operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to retain full control over your nitrogen production at all times. Each unit is customized to your specific needs. Parker-Airtech is committed to offering you the best technologies to optimally support and enhance your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Fedewuddvjpfx Afleft Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: novo, Leto izdelave: 2025, Parker-Airtech presents the latest generation of nitrogen generators, setting new standards on the market with an outstanding air factor. Our systems are characterized by the exclusive use of high-quality components, ensuring both durability and reliability. The cost-effective operation of the system is marked by low energy consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, and premium, long-lasting components. This enables rapid return on investment for the system. An intelligent monitoring system allows continuous surveillance of operational parameters, ensuring you are always informed about the status of your unit. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to maintain full control over your nitrogen production at all times. The system is customized to your individual requirements. Ffedpfxjnq Dkij Aflet Parker-Airtech is dedicated to providing you with the best technologies to optimally support and maximize your processes. Rely on innovation, quality, and performance—choose Parker-Airtech.

Leto izdelave: 2025, Stanje: novo, Parker-Airtech presents the latest generation of nitrogen generators, delivering exceptional performance on the market thanks to an outstanding air factor. Our systems are distinguished by the exclusive use of high-quality components, ensuring their durability and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation, no need for additional gases such as hydrogen for oxygen reduction, as well as high-quality and long-lasting components. This enables a very short payback period for the system. Fedpswzv Hiofx Afljft An intelligent monitoring system provides continuous supervision of all operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go, our system is conveniently accessible via your mobile phone, allowing you to retain full control over your nitrogen production at all times. Each unit is customized to your specific needs. Parker-Airtech is committed to offering you the best technologies to optimally support and enhance your processes. Rely on innovation, quality, and performance – choose Parker-Airtech.

Leto izdelave: 2020, Stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature). Fodpfecx R Ddjx Afljft

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: SPIN500, Co-lead Spin Dryer je kompaktni centrifugirni stroj za odcejanje zelenjave, namenjen odstranjevanju odvečne vode s solatnic in druge sveže zelenjave. Košara z izdelkom se vstavi v stroj in po zaprtju pokrova motor samodejno zažene cikel. Magnetno zaklepanje poskrbi za varnost in zadrži pokrov med centrifugiranjem. Primeren je za odcejanje listnate zelenjave, sadja ter sveže narezane zelenjave. Ohišje je izdelano iz nerjavečega jekla SUS304, ki zagotavlja visoko odpornost proti koroziji in estetski videz. Priložena je posebna košara za dehidracijo, kar omogoča enostavno rokovanje in shranjevanje. Stroj omogoča nastavitev časa in hitrosti dehidriranja, delovanje pa je tiho in stabilno. Primeren je za sadno-zelenjavne obrate ter za potrebe večjih in srednjih industrijskih obratov skupinskega prehranjevanja. * Uporablja frekvenčno krmiljeno centrifugalno tehnologijo za učinkovito površinsko dehidracijo materiala; * Z uporabo frekvenčne regulacije in optičnih senzorjev omogoča natančen nadzor časa in hitrosti cedenja ter samodejno upravljanje vklopa in izklopa; * Popolnoma odprta zasnova olajša montažo, čiščenje in jemanje materiala pri predelavi zelenjave; * Pogon zagotavlja asinhronski motor s frekvenčno regulacijo hitrosti (enofazni ali trifazni), kar omogoča stabilno in enostavno nastavitev hitrosti vrtenja. Fjdpfx Aeiniz Dsfloft

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Cryogenic GOFA tank trailer for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Fodjrk Na Aopfx Afljft Capacity: 12,000 L We also have other tankers available for LIN, LOX, LAR, LNG, and CO2, as well as for argon, oxygen, nitrogen, and carbon dioxide. We are happy to answer your questions by phone or email.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 15.000 h, Stopnja kompresorja Atlas Copco po obnovi. Ffjdpfx Afjmzbdwjlet

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, delovna širina: 1.300 mm, globina grla: 410 mm, razdalja med stojali: 960 mm, obratovalna hitrost: 20 mm/s, hitrost vzvratne vožnje: 20 mm/s, skupna masa: 3.600 kg, skupna dolžina: 2.740 mm, skupna širina: 2.140 mm, skupna višina: 2.317 mm, vhodna napetost: 200 V, stiskalna sila: 36 t, delovna dolžina: 1.300 mm,

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: Fsdpfx Afsvambcolsft >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.