Natančen stružnica

Ai Hembrug DR1S

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Itodpfow T Tcwox Ah Uon Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: zelo dobro (rabljeno), Control: Heidenhain TNC 310 equipped with indexing head Isdpfxowkrn Io Ah Ustn Travel paths X/Y/Z: 500/250/160 mm W axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool – quick-change system: SF 32 Stepless speed range: 9,200 rpm Drive power: 5 kW Space requirements (W x D x H): 1850 x 2550 x 2400 mm

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6400 [rpm] Iedpfxoypxqre Ah Ujtn - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total power: 28 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3870 x 1670 [mm] - Machine height: 2500 [mm] - Machine weight: 6000 [kg] OPERATING HOURS - Power-on hours: 23240 [h] - Operating hours: 19500 [h] ACCESSORIES - Control system: Traub TX 8i-p - 3-colour status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Workpiece removal - Parts conveyor belt - Bar feeder preparation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Brand: Oerlikon / SAF Model: LP100 Year: 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm Rotational speed: 100-1200 mm/min Ijdpfxslffdyo Ah Uotn Wheel width: 235 mm Wheel diameter: 450 mm Distance between travel wheels: 1930 mm (between flanges) Travel speed: 4 m/min Equipped with wired remote control with buttons for rotation direction, variable speed control, and travel of the turning device. Power supply: Three-phase 380V Supplied with manual and CE documentation.

Stanje: rabljeno, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Capacities: centre height 175 mm, centre distance 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); grinding spindle travel max. 320 mm. Technical data: stepless grinding wheel speeds 1000–2150 rpm (peripheral speed 45 m/s); feed 7,500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible load 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6,000 kg; dimensions 4,700×2,300×2,000 mm; compressed air 6 bar. Accessories: coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centres, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances. Itjdpjyxn Itsfx Ah Usn

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Iedpfx Ajzb U Epeh Ustn Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on configuration): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks, using adaptation accessories. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, rated torque: 3 Nm Ball screw, dia. x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Infinitely variable working feeds, X/Z axes: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, peak power (intermittent): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardised tool holder mounting: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position turret VDI 30 for 6 live tool stations 1 pneumatically operated tailstock, ref. 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 revolving live centre Brucker CM5 1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552 1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550 1 KENNAMETAL ESX-25, without ESX nut 1 EWS ESX-25, without ESX nut 4 left-hand short radial toolholders, form B2, ref. 4100.0100 1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet 1 ditto without EX25 nut 3 tapping collets Ø 4.5 / 6 / 8 mm 1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124 1 ditto, Ø 32 mm boring, ref. 4100.00107 1 ditto, Ø 20 mm boring, ref. 4100.00105 1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108 1 ditto Ø 10 mm, ref. 4100.0109 1 ditto Ø 12 mm, ref. 4100.0110 2 ditto Ø 16 mm, ref. 4100.0111 1 ditto Ø 20 mm, ref. 4100.0112 1 ditto Ø 25 mm, ref. 4100.0113 1 ditto Ø 32 mm, ref. 4100.0115 1 GARANT long, Ø 32 mm 5 steel protection plugs, form Z2, ref. 4100.00130 1 left-hand axial toolholder, force C4, ref. 4100.00103 1 pneumatically operated tailstock CM5, ref. 180-65.200 1 support stand for microscope, ref. 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT Except in the case of error or omission, these technical details are provided without obligation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Krmiljenje: HEIDENHAIN TNC 426, priključna moč: 7,7 kW, vključno z obračalcem/dvigalom 3R WorkPal, z dokumentacijo v papirni obliki, brez rezervnih delov. Ijdex Tpytspfx Ah Ustn

Stanje: zelo dobro (rabljeno), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Working area: Quill stroke Z-axis 110 mm Travel machine head 450 mm Table to spindle nose 0–527 mm Quick-change system SF 32 Working spindle 2.9 kW Infinitely variable speed range 50–6300 rpm Itodpjw Hqdmjfx Ah Uon Clamping surface 255 x 550 mm Dimensions and weight: Space requirement (W x D x H) 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Stanje: dober (rabljeno), Leto izdelave: 2014, Na voljo je brezsrediščni okrogli brusilni stroj proizvajalca Tschudin, vključno z avtomatizacijo. Iodpfxjx Urh As Ah Ustn Stroj je v zelo dobrem stanju in si ga je možno ogledati. Tehnični podatki so navedeni v PDF dokumentu.

Stanje: dober (rabljeno), Leto izdelave: 1975, Koordinatni brusilni stroj Proizvajalec: HAUSER, tip: 5 SM, leto: 1975 z dvema osnima digitalnima prikazoma Heidenhain. Miza: 750 mm x 620 mm Pomiki: X 700 mm, Y 500 mm, Z 150 mm Število vrtljajev brusilne glave: 9.000 – 80.000 vrt/min Skupna moč: 6,3 kW V dobrem stanju, na zalogi. Dimenzije stroja: 2500 mm x 1700 mm x 2700 mm Iedsr H Dvdspfx Ah Uetn Teža pribl.: 5.100 kg. Z omaro za orodje in dodatki, dokumentacija prisotna.