Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 700 mm, število vreten: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of storage units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-direction: 6 Number of spindles for horizontal drilling in X-direction: 8 (4 on each side) Lodsyq Irhjpfx Adkohd MACHINE DETAILS Control system: WINDOWS Motor output (vertical drilling): 3 kW Motor output (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents for descriptive purposes only. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6106

Stanje: zelo dobro (rabljeno), Motor power 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Transverse travel: 300 mm Longitudinal travel: 150 mm Height adjustment: 170 mm Table height: 880 mm Lhjdpjvzramsfx Adked Weight approx. 280 kg

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 Lhodpfxjd Supgj Adksd STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: rabljeno, Comec FM0/2000/CA Horizontal Boring Machine with Feeder Lhsdpfxjrkctcj Adksd 6 horizontal heads + approximately ten additional heads and spare spindles (see photos) 4 belt-driven motors Working length: 200 cm

Stanje: rabljeno, Leto izdelave: 2000, Število vreten po vrsti lukenj: 11 Število vodoravnih vreten: 3 Glava za lončane tečaje: da, Blum Razmak med svedri: 32 mm Poraba energije: 2,2 kW Vrtalni agregat: vrtljiv Lhsdpfjxc Hi Ujx Adked

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom Lhjdpfx Aoycg U Eodksd ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: dober (rabljeno), Koda: 0342 Znamka: VITAP Model: ALFA 35 - CE standard Polavtomatski več-vretenski vrtalni stroj s 35 vreteni za proizvodnjo pohištva, kuhinj, kopalniškega pohištva, pohištva po meri, panelov - CE standard Tehnični podatki Število vreten: 35 z hitrim vpenjanjem Razmak med vreteni: 32 mm Razmak med prvim in zadnjim vretenom: 1088 mm Maksimalna globina izvrtine: 70 mm Lodpjywm A Hofx Adkohd Dimenzije obdelovanca: 1330 x 500 mm Število vrtljajev vretena: 2800 na minuto Moč motorja: 3 Hp Revolver s 6 različnimi nastavitvami globine Stranska vodila Glava z 45° pnevmatskim nagibom horizontalno/vertikalno Metrična letvica 3000 mm z omejitvami Obratovalni tlak: 6-8 atm Skupne mere: 1590 x 860 x 1250 mm (višina) Teža: 454 kg

Stanje: rabljeno, Leto izdelave: 1985, Rabljeni stroj Lhjdpfxjwka Hfs Adkjd Leto izdelave: 1985 Oprema in tehnični podatki: - Za konstrukcijske izvrtine horizontalno in vertikalno - Za vrtanje vrst lukenj vertikalno z razmakom 32 mm - Vertikalni vrtalni agregat z dvo-vretenskimi glavami, prosto pozicioniranimi na indeksni osi - Motor 1,5 kW s 1400 vrt/min - Motor 1,5 kW s 2800 vrt/min - Vrtalne glave s pnevmatskim pomikom - Pnevmatski vpenjalci materiala - Prehodna širina pribl. 850 mm - Vključno z različnimi omejevalniki in svedri Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Oprema in tehnični podatki: Ledowkba Hopfx Adkehd - 2-čeljustna vrtalna glava za steblo do 20 mm premera - Pnevmatska nastavitev položaja na 2 nivojih 0-100 mm - Največja globina vrtanja 150 mm - Precizna rastrovna letvica 12 mm - Centrirna aretacija in prečna nastavitev - 2 pnevmatska varnostna vpenjalna cilindra - Motor 1,5 kW - Število obratov 2800 obr/min Dimenzije (brez prislona): 1100 x 1100 x 1500 mm Teža: pribl. 310 kg Dobavljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Rabljeni stroj Rabljeni vrstni vrtalni stroj znamke Ganner, tip RB 107 Tovarniška št.: 121627 Moč motorja: 1,5 kW Hitrost motorja: 2800 vrt/min 1 vrtalna greda s 26 vreteni, razdalja med osmi 32 mm 3 pritiskači 1 nožno stikalo Lhodew I Unwopfx Adkod Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1985, Rabljeni stroj Leto izdelave: 1985 Univerzalni stroj za vrtanje moznikov z nagibno vrtalno enoto s popolnoma avtomatskim upravljanjem Lhjdpfx Asyvl Hzsdksd z 2 varnostnima pnevmatskima vpenjaloma Motor vrtalne enote 2,2 kW z 21 vreteni Razmik vretenc 32 mm z nameščenim oljnim dušilcem Višinsko nastavljanje 80 mm Globina vrtanja 80 mm Teža 420 kg Razpoložljivost: takoj Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Ledpfow I Uy Tsx Adkshd Leto izdelave: 1993 Oprema in tehnični podatki: Vpenjalna glava z 2 čeljustmi do Ø 20 mm stebla Pnevmatska nastavitev pozicije na 2 nivojih 0-100 mm Maks. globina vrtanja: 150 mm Precizna zobata letev 12 mm Sredinska zapora in prečno nastavljanje. 2 pnevmatska varnostna vpenjalna valja Motor 1,5 kW Št. vrtljajev: 2800 o/min Nastavljiva enota za podolgovate izvrtine z 2 programskima ekscentroma Teža stroja ca. 310 kg Velikost stroja (ŠxGxV) 1100 x 1100 x 1500 mm (brez prislona) Razpoložljivost: hitro dobavljivo Lokacija: Röllbach

Stanje: generalkompletno obnovljen (rabljeno), Vertikalni vrtalni stroj s 3 vreteni Lhsdpfxsytr Hhj Adked

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas Lhsdpfx Adoxwaz Hjkod - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. Ledsxnlfljpfx Adkehd - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: zelo dobro (rabljeno), PC-krmiljenje Power Control PC85T Programska oprema WoodWOP + TOPDRILL Št. 2 prehodnih motoriziranih transportnih trakov Lhjdpoyv Ev Aefx Adkjd Št. 2 horizontalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 1 vrtalna enota za vsak horizontalni vrtalni nosilec (1 x 1,5 kW) Št. 21 vreten za vsako horizontalno vrtalno enoto Največja delovna širina (mm) 2500 Najmanjša delovna širina (mm) 250 Št. 4 spodnji vertikalni vrtalni nosilci (digitalni prikaz podatkov o položaju za osi) Št. 2 vrtalni enoti za vsak spodnji vertikalni vrtalni nosilec (2 x 1,5 kW) Št. 4 zgornje vertikalne vpenjalne enote za obdelovance Transportni trak za odvoz odrezkov Skupna priključna moč (kW) 35

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Globina vrtanja 180 mm Višinska nastavitev 200 mm Vpenjalna glava 0-20 mm Število obratov 2800 /min Lhedpfx Adeyviuvekjd Moč motorja 2,2 kW Teža pribl. 240 kg

Stanje: zelo dobro (rabljeno), PC kontrola tipa NC 500 (Software Tooling System) Br. 2 motorizovanih transportnih traka Br. 2 horizontalnih nosača za bušenje Br. 2 bušaće jedinice za svaki horizontalni nosač Maks. radna širina (mm) 3200 - Min. radna širina (mm) 205 (približno) Br. 8 donjih vertikalnih nosača za bušenje Lodpfsyvrrqsx Adkshd Br. 2 bušaće jedinice za svaki donji vertikalni nosač Br. 4 gornjih vertikalnih nosača za bušenje Br. 2 vretena za svaku bušaću jedinicu na gornjem nosaču Br. 5 gornjih vertikalnih stega za radne komade Br. 2 beskonačna puža za odvod strugotine Digitalni prikaz pozicijskih podataka (osa) Ukupna priključna snaga (kW) 48 CNC kontrola upravlja pomeranjem (osa X) horizontalnih nosača za bušenje CNC upravlja pomeranjem (osa X) transportnih traka CNC kontrola upravlja pomeranjem (osa Y) graničnika CNC upravlja pomeranjem (osa Z) svih vertikalnih nosača za bušenje

Stanje: dober (rabljeno), Vrtalni stroj za dolge luknje L2 - Leto izdelave: 1977 - Teža: cca 220 kg - Skupne dimenzije: cca 1.120 x 880 x 1.120 mm (ŠxGxV) - Višina mize: cca 980 mm - Velikost mize: cca 820 x 350 mm - Poraba toka: 3,2 A / trifazni priključek - Globina vrtanja: cca 150 mm - Dolžina vrtanja: cca 200 mm - Max. višina vrtanja: cca 120 mm - Vpenjalna glava: cca 3-20 mm Lhjdeywnuwjpfx Adkod

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj za vrtanje dolgih lukenj CM104 - Letnik izdelave: 1999 - 400 V - z napravo za vrtanje moznika z zatičnim zatičem, daljinsko upravljanje - robustna izdelava - enoročna upravljalna ročica Lhsdpfx Aoywnqlodkod - dvokraka vrtalna glava Westcott - odsesovalna naprava

Stanje: zelo dobro (rabljeno), Oscillating Milling Machine for Shutters OMG Pneumatic material clamps Automatic feeding of slats Aggregate angle adjustment 0-90° Lhsdpfxou Iwcwe Adkjd Pneumatic spindle movement Guide rail supports Adjustable oscillation stroke of the drills

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Ledpfjym Ny Sjx Adkjhd Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOMAG WEEKE OPTIMAT ABD 150 je visokozmogljiv CNC stroj, zasnovan za natančno vrtanje, vstavljanje moznikov in montažo okovja v proizvodnji pohištva in obdelavi plošč. Stroj je idealen za mizarje, proizvajalce pohištva in industrijske lesnopredelovalne obrate, ki potrebujejo natančno in učinkovito avtomatizirano obdelavo. Lastnosti stroja: CNC-krmiljena enota za vrtanje in vstavljanje Lodpfxoym Nvts Adkohd Integriran sistem za lepljenje in vstavljanje moznikov Robustna industrijska konstrukcija Kompaktne dimenzije Uporabniku prijazen upravljalni panel CE certifikat Stroj je redno vzdrževan in pripravljen za uporabo.

Stanje: rabljeno, Ročni stroj za vstavljanje kompasa Lhjdpfjuxt Ahjx Adkjd

Stanje: novo, Leto izdelave: 2026, Number of spindles: 1 unit Max. drilling depth: 150 mm Motor power: 1.5 kW Götzinger System Hoffmann Frame and Slot Mortising Machine HF 150 E The alternative to the classic slot mortising machine The HF 150 E model provides entry-level users with the ability to do more than just slot mortising. The machine offers everything needed for precise frame drilling – at an economical price point. Proven linear guides guarantee vibration-free precision drilling. Feed is manual. The workpiece stop systems ensure clear, practical operation. Convincing advantages: - Universal application – The use of the machine is fully adaptable to the user's requirements. Whether used as a frame drilling machine for intermediate and corner joints, or as a dedicated slot mortising machine, this machine is suitable for any user. - Ergonomic and practice-oriented – All adjustments, operations, and tool changes are performed from the operator side. Workpiece clamping is pneumatic, activated via hand valves – eliminating the physical effort needed for mechanical lever clamping. - Precise results – Repeating drilling patterns and positions is achieved precisely via a 12 mm pitch grid. Drilling depth is set manually with a digital display in 0.1 mm increments. - Expandable with special accessories for any requirement – e.g., longitudinal stop systems in various designs, adjustable side stops, line laser for marking-based drilling, miter angles, quick-change drill chuck for multi-spindle drilling heads, and much more. Technical Data Drilling Unit ----- Height adjustment via digital readout Height adjustment range: 100 mm (manual) Drilling stroke/depth: 150 mm (manual) Cross adjustment: 320 mm with grid Drilling pattern width: 12 mm pitch, standard Three-phase motor: 230/400 V, 50 Hz, 2,850 rpm, 1.5 kW Stop System ----- 2 lateral stops, swing-in/swing-out Tool Holder ----- Special drill chuck with 2 tool inserts, 1 x M10, 1 bore diameter of choice Workpiece Clamping ----- Pneumatic via manual slide valve Machine supplied operational, on mobile base Ljdeytx Uxopfx Adkehd (Technical data according to manufacturer – no liability for errors!) Special accessories – see PDF attachment!