Večlistna žaga nakup rabljenega (215)

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, moč: 79 kW (107,41 KM), največja višina reza: 180 mm, največja širina rezanja: 350 mm, Oprema: dokumentacija / priročnik, Dvojna večlistna žaga Model: PO/560-D V letih nakupa je podjetje STORTI prevzelo podjetje OGAM, zato je celoten stroj razen kovinskega okvirja proizvedel STORTI. Minimalni premer žaginega lista: 250 mm Maksimalni premer žaginega lista: 300 mm Moč: 79 kW Maksimalna višina reza: 180 mm Maksimalna širina reza: 350 mm Dodpszbh T Tsfx Altouw Maksimalna širina lesa: 700 mm

Stanje: zelo dobro (rabljeno), Širina tira 25 cm Višina reza 10 cm Dujdpfsy S Rpmox Altjw Motor 22 kW Takoj pripravljen za uporabo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, SINGLE-SHAFT TRACKED MULTIBLADE SAW TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Equipped with new guides and a new chain. The upgrade was quite costly—totaling PLN 36,000. TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Installed blade: 400 mm - Max. blade diameter: 450 mm - Blade bore diameter: 80 mm - Max. cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top section features: - Kickback pawls - Sliding shaft - Kickback devices - Smooth sliding roller - Pressure unit - Shaft with bushing and nut - Pressure unit - 2 sliding/pressure shafts Bottom section features: - Roller in front of the table - Guide - Pawls - Track - Central lubrication for track - Electrically adjustable saw shaft height - Electrically adjustable body height: 0.75 kW - Stepless feed speed adjustment (equipped with new 2.2 kW inverter) - Extraction connector diameter: 280 mm - Main motor: 75 kW - Overall dimensions (LxWxH): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture Dedpfsy Nxdyjx Altjuw - Pre-owned multiblade saw - Upper control panel - DTR (technical documentation) included - Excellent condition Warranty on equipment can be provided.

Leto izdelave: 1993, stanje: rabljeno, • Working width (mm): 2200 • Motor power (kW): 22 • Upper rollers: with PU rings Duedpfxjn I Twys Altow • Lower rollers: corrugated • Saw shaft: included

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58.5 kW Twin Edger DS-160 DELUXE Dsdpfx Aovz Eh Roltjuw - Max. cutting height: 160 mm - Max. feed width: 980 mm - Can be loaded with up to 15 saw blades - Saw blade diameter: 450 mm - Saw shaft diameter: 75 mm - Saw blade bore ø 75 mm with keyway - Feed speed adjustable from 0 to 30 m/min - Incl. chip conveyor belt - Saw shaft motor: 55.0 kW - Total connected load: 58.5 kW - Voltage: 400 V / 50 Hz - CE conformity - Dimensions: L = 3500 mm, W = 1950 mm - Weight: 2500 kg Option: Also available with 22.0 kW / 37.0 kW / 45.0 kW motor

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1900 x 1000 x 1250 mm Weight: 800 kg Total Power Requirement: 12.5 kW Multiblade Saw MBS-400 Dedpovz Hr Rofx Altjuw - Working Width min./max.: 200 / 400 mm - Cutting Height min./max.: 5 / 30 mm - Min. Workpiece Length: 550 mm - Spindle Diameter: 74 mm - Saw Shaft Speed: 2600 rpm - Saw Blade Diameter: 205 mm - Max. 30 Saw Blades on Saw Shaft - Motor Power: 11.0 kW - Voltage: 400 V / 50 Hz - Feed Motor Power: 1.5 kW - Total Connected Load: 12.5 kW - Feed Speed: 0–12 m/min - Feed Rollers: 6 pairs (12 pieces) - Extraction Port: 150 mm - Dimensions: L=1900, W=1000, H=1250 mm - Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 2200 x 1200 x 1250 mm Weight: 1000 kg Total power requirement: 16.5 kW Multiblade Saw MBS-600 Dujdpfx Aovz Htboltsw - Working width min./max.: 200 / 600 mm - Cutting height min./max.: 5 / 30 mm - Min. workpiece length: 550 mm - Spindle diameter: 74 mm - Saw shaft speed: 2600 rpm - Saw blade diameter: 205 mm - Max. number of saw blades on shaft: 30 - Main motor power: 15.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 1.5 kW - Total connected load: 16.5 kW - Feed speed: 0–12 m/min - Feed rollers: 6 pairs (12 pieces) - Extraction port: 150 mm - Dimensions (L = 2200, W = 1200, H = 1250 mm) - Weight: 1000 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 4460 x 1780 x 1880 mm Weight: 3,500 kg Total Power Requirement: 57.2 kW Multiblade Saw MULTIMAX 155 - Chain width: 350 mm - Cutting height: 10 – 155 mm - Max. saw blade Ø: 405 mm - Min. saw blade Ø: 355 mm - Saw blade bore Ø: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm - Speed: 2,600 rpm - Feed rate: 2.5 – 24 m/min - Saw spindle motor: 55 kW - Feed motor: 2.2 kW - Total connected load: 57.2 kW - Digital display for feed speed - Saw sleeve with a set of flange rings - Anti-kickback device - Automatic lubrication system Dujdpfx Ajvz Hwgjltsw - Automatic star-delta switch - Infeed roller conveyor length: 1,500 mm - Outfeed roller conveyor length: 1,500 mm - Extraction port: 2 x Ø 150 mm - Transport dimensions (L x W x H): 2,100 x 1,900 x 1,980 mm - Dimensions with infeed and outfeed roller conveyors (L x W x H): 4,460 x 1,780 x 1,880 mm - Weight: 3,500 kg - CE compliant

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 2100 x 1900 x 1980 mm Weight: 3500 kg Total power requirement: 39.2 kW Multi-Blade Saw MULTIMAX 350 - Chain width: 350 mm - Cutting height: 10 – 135 mm - Max. saw blade diameter: 405 mm - Min. saw blade diameter: 355 mm - Saw blade bore diameter: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm Dodpfx Aovz Hxdsltouw - Speed: 2,600 rpm - Feed rate: 2.5 – 24 m/min - Saw shaft motor: 37 kW - Feed motor: 2.2 kW - Total power connection: 39.2 kW - Digital display for feed speed - Saw bushing with set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta starter - Infeed roller conveyor length: 1,500 mm - Outfeed roller conveyor length: 1,500 mm - Extraction connection: 2 x Ø 150 mm - Transport dimensions (L x W x H): 2100 x 1900 x 1980 mm - Dimensions with infeed and outfeed roller conveyor (L x W x H): 4460 x 1780 x 1880 mm - Weight: 3,500 kg - CE compliant

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1600 x 1500 x 1500 mm Dusdpfovz Eu Djx Altow Weight: 1400 kg Total Power Requirement: 12.6 kW Double Edger DOUBLECUTMAX 450 - Feedthrough width: 950 mm - Adjustment range between left and right saw units: 60 - 430 mm - Cutting height min. / max.: 15 - 80 mm - Min. / max. distance between the saw blades on the left and right saw units: 10 - 100 mm (adjustable with fixed spacer ring) - 4 units carbide-tipped saw blade 400 x 80 mm Z 18 - Width adjustment speed: 10 mm/s - Saw motor power: 2 x 5.2 kW - Feed motor power: 1.1 kW - Width adjustment motor power: 1.1 kW - Total power: 12.6 kW / 400 V - Feed speed: 7, 10, 13, 14, 20, 26 m/min - Dimensions: L = 1600, W = 1500, H = 1500 mm - Infeed length: 3150 mm - Outfeed table length: 2300 mm - Total length: 7000 mm - Weight: 1400 kg OPTIONAL: - Electric measuring device for width adjustment: €92.00 - Laser, 2 units: EUR 1,050.00 - Carbide saw blade 400 x 80 x 4.0/2.8/ Z = 18 GM20, without raker (original saw blade): €95.00 - Carbide saw blade 400 x 80 x 4.2/3.0/ Z = 24 FL with raker – DKN 20x5: €120.00

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2300 kg Total power requirement: 37 kW Multi-blade saw MBS-1300-45 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 45 mm - Min. workpiece length: 600 mm - Spindle diameter: 85 mm - Saw spindle speed: 2600 rpm - Saw blade diameter: 255 mm - Max. 30 saw blades on the spindle - Motor output: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 7 pairs (14 units) Dsdpfx Alsvz Hrqstjuw - Extraction connection: 150 mm - Dimensions (L = 2300, W = 1800, H = 1400 mm) - Weight: 2300 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2200 x 1500 x 1250 mm Weight: 1500 kg Total power requirement: 23.5 kW Duodpfx Alovz Hthotow Multi-blade saw MBS-930 - Working width min./max.: 200 / 930 mm - Cutting height min./max.: 5 / 30 mm - Min. workpiece length: 550 mm - Spindle diameter: 74 mm - Saw arbor speed: 2600 rpm - Saw blade diameter: 205 mm - Max. 30 saw blades on saw arbor - Motor power: 22.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 1.5 kW - Total connected load: 23.5 kW - Feed speed: 0–12 m/min - Feed rollers: 6 pairs (12 pcs) - Extraction port: 150 mm - Dimensions: L=2200 mm, W=1500 mm, H=1250 mm - Weight: 1500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2200 x 1500 x 1580 mm Weight: 2300 kg Total connected load: 40 kW Multi-Blade Circular Saw MULTIMAX 300 - Chain width: 300 mm - Cutting height: 10 - 120 mm - Max. saw blade Ø: 380 mm - Min. saw blade Ø: 200 mm - Saw blade bore Ø: 70 mm - Saw shaft Ø: 55 mm - Min. workpiece length: 600 mm (individual) / 300 mm (serial) - Working height: 740 mm - Table dimensions: 1530 x 760 mm - Speed: 4000 rpm - Feed rate: 7.5 - 30 m/min Dedjvz Hwyjpfx Altjuw - Saw shaft motor: 37 kW - Feed motor: 2.2 kW - Total electrical connection: 40 kW - Digital feed speed display - Saw bushing with set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction ports: 2 x 150 mm - Dimensions: 2200 x 1500 x 1580 mm - Weight: 2300 kg - CE certified execution

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1930 x 1580 x 1580 mm Weight: 2250 kg Total power requirement: 32.57 kW Multiblade Saw MULTIMAX 300 Short - Chain width: 300 mm - Cutting height: 10 - 85 mm - Max. saw blade diameter: 380 mm - Min. saw blade diameter: 200 mm - Saw blade bore: 70 mm - Saw spindle diameter: 55 mm - Min. workpiece length: 530 mm (single) / 200 mm (serial) - Working height: 740 mm - Table dimensions: 1530 x 760 mm - Speed: 4000 rpm - Feed rate: 4 - 30 m/min - Saw spindle motor: 30 kW - Feed motor: 2.2 kW - Total connection: 32.57 kW - Digital display for feed speed - Saw sleeve with a set of flange rings - Kickback protection - Automatic lubrication system - Automatic star-delta switch - Extraction nozzle: 2 x 150 mm - Dimensions: 1930 x 1580 x 1580 mm Dedpfsvz Hw Tsx Altsuw - Weight: 2250 kg - CE compliant

Stanje: novo, Leto izdelave: 2026, Cutting width 450 mm Weight 5,500 kg Working height 850 mm WINTER Multi-Blade Saw MULTIMAX 175 M4 + VISUAL OPTIMIZATION SYSTEM VISUAL OPTIMIZATION SYSTEM: The operator places the raw boards onto the chain conveyor. The cross conveyor is started by pressing a manual button. During transport beneath the visual measuring system, the board is measured from above. The determined usable board width serves as the basis for 2D optimization. The line can be operated in two modes: 1. Automatic mode without quality considerations The detected usable board surface is optimized according to the pre-programmed width/length combinations. 2. Semi-automatic mode with quality offset The usable board surface can be corrected by marking different quality zones across the board width. Quality marking is performed via the touchscreen. Optimized boards are transferred to the infeed and positioning system, which securely fixes the board with two positioning hooks. Conveyor belts and upper pressure rollers guide the board precisely into the MULTIMAX 175 M4. Function: Board measurement occurs during cross transport. For accurate measurement, the narrow board side must face upwards. Automatic measurement provides information on: - Total width of the board - Position and width of the board edge - Effective usable width - Board length (within the permitted grid) By entering an offset, parts of the board edge can be accepted for specific products. 2D Optimization Program: Width: Optimization solely by width according to the cutting list, maximum material yield. Price: Additionally, prices are stored in the cutting list; the system optimizes for maximum value. Quantity: Required quantities are taken into account, allowing the machine to process orders rapidly. Based on the stored lengths and widths, the vision system performs full 2D optimization. All entered data is saved and analyzed so that all cuts can be reviewed at any time. The quality function module allows the operator to override the measured board width and define quality zones. The updated optimization is displayed on the touchscreen. Dodeyk Icgepfx Altjuw Up to four quality grades are possible. However, the quality offset function reduces the maximum output of the line. Technical Parameters Feed speed: 50 m/min Max. infeed width: 800 mm Infeed length: 800–4,000 mm Feed platform motor power: 0.75 kW Working height: 870 mm Number of cross chains: 6 Chain length: 2,850 mm Conveyor weight: 1.2 t Weight of visual scanning system: 1.8 t Servo power of positioning hooks: 2 × 800 W Horizontal feed speed: 20 m/min Horizontal feed motor power: 0.75 kW Longitudinal feed speed: 10–60 m/min Longitudinal feed motor power: 1.5 kW Infeed system weight: 1.4 t MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: - Industrial computer with touchscreen - Entry of cutting lists, display of optimization results, machine status, error messages - Multi-function handheld device for quality marking and width measurement - Laser for width measurement Each hand control unit operates an individually positionable saw arbor Software opti...

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina): 3076x1250x1600 mm Teža: 2000 kg Skupna potrebna moč: 25,32 kW Večlistna žaga MBS-250 ECO - Največja delovna širina: 250 mm - Največja delovna višina: 80 mm - Podajalna hitrost: 5 - 18 m/min - Ø žagine gredi: 50 mm - Ključno pero žaginega lista: 16 x 5 mm - Hitrost vrtenja žagine gredi: 4000 obr/min - Maks. Ø žaginega lista: 300 mm Dodoyk Ic Tepfx Alteuw - Motor žagine gredi: 22,0 kW - Motor nastavitve višine: 0,37 kW - Motor podajanja: 0,75 kW - Skupna moč: 25,32 kW - Dimenzije: D=3076, Š=1250, V=1600 mm - Teža: 2000 kg Vključuje: - Trdo kromirane mize

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2200 x 1800 x 1250 mm Weight: 1700 kg Total Power Requirement: 23.5 kW Multi-Blade Saw MBS-1300 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 30 mm - Minimum workpiece length: 550 mm - Spindle diameter: 74 mm - Saw spindle speed: 2600 rpm - Saw blade diameter: 205 mm - Maximum number of saw blades on spindle: 30 - Motor power: 22.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 1.5 kW - Total connected load: 23.5 kW - Feed speed: 0-12 m/min - Feed rollers: 6 pairs (12 pieces) - Extraction nozzle: 150 mm - Dimensions: L=2200, W=1800, H=1250 mm - Weight: 1700 kg Dedsvz Hrkepfx Altjuw

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3600 x 800 x 1900 mm Weight: 2400 kg Total power requirement: 16 kW Thin-Cut Frame Saw FRAMEMAX 250 - Min./max. cutting height: 40 - 250 mm - Cutting width: 150 mm - Lamella thickness (depending on wood type): >2.0 mm - Saw blade length: 500 mm Dusdjvz E Nuspfx Altsw - Kerf: 0.9 - 1.4 mm - Motor: 15 kW (20 HP) / 400 V - Feed speed: 0.3 - 1.7 m/min - Frame stroke: 210 mm - Cutting accuracy (60 - 160 mm): +/- 0.1 mm - Cutting accuracy (60 - 250 mm): +/- 0.2 mm - Side fence cutting width: 60 - 150 mm - Center fence cutting width: 2 x 30 - 65 mm - Number of channels: 2-4 x 20-65 mm - Min. block length: 300 mm - Strokes per minute: 450 strokes/min - Max. number of saw blades (

Stanje: novo, Leto izdelave: 2026, Cutting width 450 mm Operating voltage 400 V Weight 5500 kg WINTER Multi-blade saw with 4 electrically adjustable saw units MULTIMAX 175 M4 MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: Industrial computer with touchscreen - Entry of cutting lists, display of optimization results, machine status, error messages Multi-function handheld device for quality marking and width measurement Laser for width measurement Each hand control unit operates a freely positionable saw spindle Software optimizes taking into account material yield, value, and productivity. All production data is stored, monitored, and analyzed. Additional features: Independent control panel (cable length 6 m) Spray-mist lubrication system for saw spindles FIX-laser (manually adjustable) for displaying the saw blade position Movable laser per saw spindle (synchronized with blade position) Lasers can show the next cut solution while the previous board is still being sawn Feed system Automatic feed 'Easy Feed' with powered pressure rollers Continuously adjustable feed speed High-performance transport chain with hardened sliding pins Hardened prism rails for precise guidance Technical parameters MULTIMAX 175 M4: Max. cutting width: 450 mm Min. cutting width: 45 mm Max. cutting height without pressure plate: 80 mm Max. cutting height with pressure plate: 60 mm Max. feed width: 800 mm Min. cutting length with pressure plate: 600 mm Total motor power: 37 kW Operating voltage: 400 V / 50 Hz Saw spindle diameter: 65 mm Spindle speed: 4200 rpm Saw blade Ø min./max.: 250 / 305 mm Saw blade bore: 80 mm 6 carbide saw blades Ø300 × 3.1 / 2.2 × Z28 Positioning speed: max. 150 mm/s Positioning tolerance: ±0.1 mm Feed speed: 6-60 m/min Feed motor: 4.0 kW Chain width: 500 mm Pressure roller diameter: 110 mm Max. total outfeed width: 800 mm Temperature range: 0-40 °C Extraction hood Ø250 mm Air speed: 30 m/s Air volume: 5300 m³/h Working height: 850 mm Machine dimensions: 2732 × 2256 × 2003 mm Net weight: 5500 kg Color: light grey RAL7035 / anthracite RAL7016 Cursor travel: 5 m Configuration: Transport chain with spikes (every 2nd chain link) Penetration depth: 0.8 mm (standard) Advantages: parallel feed, stable hold for twisted/wide/short boards ideal for glue joint cutting Chain brush at infeed for continuous cleaning Precision cutting via prism-guided transport chain Automatic chain lubrication (adjustable via MFD/touchscreen) Wear-resistant chain deflection under the saw blades Further features: Driven outfeed roller below (ribbed) + upper pressure roller Pneumatic control for safe discharge of offcuts High-performance pressure system with 6 spring-mounted rollers Moving pressure plate synchronized with saw blade movement Secure hold-down across the entire cutting length Motorized height adjustment of the pressure system with display Pneumatic suspension of all pressure cylinders Separate pressure control for each element Workplace and operational safety: 1 set of operation and maintenance manuals CE safety standards Multiple anti-kickback devices Swiveling safety guard with interlock and standstill monitoring EMERGENCY STOP at infeed, outfeed, and control panel Dusdpfx Aeyk H Uneltjw Protective hood with visibility ...

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2100x1900x1980 mm Weight: 3500 kg Total power requirement: 77.2 kW Multiblade Saw MULTIMAX 170 - Chain width: 350 mm - Cutting height: 10–170 mm - Max. saw blade Ø: 505 mm - Min. saw blade Ø: 355 mm - Saw blade bore Ø: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm - Rotation speed: 2600 rpm - Feed speed: 2.5–24 m/min - Saw shaft motor: 75 kW - Feed motor: 2.2 kW - Total connection: 77.2 kW - Digital display for feed speed Dujdpfx Alovz Hwmjtjw - Saw bush with a set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta starter - Infeed roller conveyor, length: 1500 mm - Outfeed roller conveyor, length: 1500 mm - Extraction port: 2 x Ø 150 mm - Transport dimensions: L=2100, W=1900, H=1980 mm - Dimensions with infeed/outfeed roller conveyor: L=4460, W=1780, H=1880 mm - Weight: 3500 kg - CE certified

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Total power requirement 16.75 kW Twin-Edger DS-80 DELUXE - Max. cutting height: 80 mm - Max. pass-through width: 980 mm - Feed with up to 15 saw blades - Saw blade diameter: 300 mm - Saw spindle diameter: 75 mm - Saw blade bore ø 75 mm with keyway - Feed speed adjustable: 0–30 m/min - Saw spindle motor: 15.0 kW - Total connected load: 16.75 kW - Voltage: 400 V / 50 Hz Dusdpfx Aovz Ezkeltow - CE conformity - Dimensions: L=3225 mm, W=1750 mm - Weight: 1200 kg Option: Also available with 7.5 kW / 11.0 kW motor

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2500 kg Total Power Requirement: 37 kW Multirip Saw MBS-1300-60 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 60 mm - Minimum workpiece length: 600 mm - Spindle diameter: 90 mm - Saw shaft speed: 2600 rpm - Saw blade diameter: 270 mm - Max. 30 saw blades on the saw shaft - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW Duodpjvz Hrwjfx Altsw - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 8 pairs (16 pcs.) - Extraction port: 150 mm - Dimensions: L=2300, W=1800, H=1400 mm - Weight: 2500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2500 x 2170 x 2080 mm Weight: 4,250 kg Total power requirement: 81 kW MULTIMAX 170-500 XL Multi-Blade Saw - Max. working width: 500 mm - Chain width: 500 mm - Max. cutting height: 170 mm - Min. cutting height: 10 mm - Min. workpiece length: 740 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 405 mm - Saw blade bore diameter: 80 mm - Spindle diameter: 60 mm (without bush) - Speed: 2,600 rpm - Feed rate: 2.5 – 24 m/min - Saw shaft motor: 75 kW - Feed motor: 5.5 kW - Height adjustment motor: 0.75 kW - Total power: 81 kW - Voltage: 400 V / 50 Hz - Digital display for feed speed - Swivelling control panel at eye level - Electrically driven infeed roller table with pneumatically controlled pressure roller - Optical wood detection via light barrier - Electrically driven outfeed roller - Heavy-duty roller conveyors at infeed and outfeed - Hard chrome-plated transport chain surface - Saw bushing with a set of flange rings - Anti-kickback device Dusdpfx Aevz Hwtjltjw - Automatic lubrication system - Automatic star-delta switch - Extraction connections: 2 x 150 mm - Working height: 820 mm - Machine dimensions: L = 4,850 mm, W = 2,020 mm, H = 1,880 mm - Transport dimensions: L = 2,500 mm, W = 2,170 mm, H = 2,080 mm - Weight: 4,250 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Večlistna žaga za obnovo obrezanih desk Dodpjx Svxtsfx Alteuw

Stanje: novo, Leto izdelave: 2026, PARALELNI OBNOVITVENI STROJ ANGOMAC Dsdpfx Alsd Tka Hotsuw prehodna širina od 600 mm do 1300 mm višina reza od 10 do 160 mm do 4 premične žage možnost uporabe fiksne osi za večlistno žago AVTOMATSKI ALI ROČNI STROJ