Večrezna žaga

WINTER MBS-1300

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2300 kg Total power requirement: 37 kW Multi-blade saw MBS-1300-45 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 45 mm Codpfsvz Hrqsx Aiqohc - Min. workpiece length: 600 mm - Spindle diameter: 85 mm - Saw spindle speed: 2600 rpm - Saw blade diameter: 255 mm - Max. 30 saw blades on the spindle - Motor output: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 7 pairs (14 units) - Extraction connection: 150 mm - Dimensions (L = 2300, W = 1800, H = 1400 mm) - Weight: 2300 kg

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 Chjdpfjl Uyfksx Aiqec - Compressor | Josval | EDS-900 | 2016

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Cjdpfxovz Hrws Aiqjhc Weight: 2500 kg Total Power Requirement: 37 kW Multirip Saw MBS-1300-60 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 60 mm - Minimum workpiece length: 600 mm - Spindle diameter: 90 mm - Saw shaft speed: 2600 rpm - Saw blade diameter: 270 mm - Max. 30 saw blades on the saw shaft - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 8 pairs (16 pcs.) - Extraction port: 150 mm - Dimensions: L=2300, W=1800, H=1400 mm - Weight: 2500 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: kabina, Spray / Painting Booth !! Always a brand-new machine (Photos shown are from installations at customer sites). We are the manufacturer. !! The Reinox 450×235 spray booth is the ideal solution for painting large components and for serial production. Thanks to its robust construction, high-performance extraction system, and ATEX certification, safe operation is ensured even in environments with explosion hazards. The booth is equipped with a powerful fan featuring a frequency inverter, allowing smooth adjustment of the extraction rate according to current needs. A three-stage filtration system keeps the workspace clean and ensures a high-quality surface finish. Chedpfjia Taxox Aiqjc Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: frequency inverter – stepless performance regulation via potentiometer on the control panel. - Filtration: three-stage (dry or water-based version according to requirements) - Certification: CE, ATEX Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Used, untested robot. No teach pendant. Not tested. Chjdpfogu U Itsx Aiqoc

Stanje: novo, Tip: 1300-2S Delovna širina: 1300 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Chedem Dr Rgopfx Aiqsc Hitrost brusnega valja – s frekvenčno regulacijo Hitrost podajanja: 5–20 m/min Skupna moč motorjev: 6,27 kW Transportne dimenzije: 1700 x 2100 x 1400 mm Teža: 1200 kg Cena: 6.100 EUR (EXW Jonava, Litva)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg Cjdovllxdopfx Aiqshc The cooler has been technically inspected and is fully functional.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Chedpfx Asgwbbqoiqjc No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Prasa o wymiarach roboczych 4,5 m x 1,9 m Cjdpfelzi S Nsx Aiqohc

Stanje: novo, Leto izdelave: 2026, CNC stroj za vrtanje in vstavljanje moznic za popolnoma avtomatsko vrtanje, lepljenje in vstavljanje moznic. Center za vrtanje in obdelavo moznic s kompaktnostjo, učinkovitostjo, kakovostjo in prilagodljivostjo. Kratek opis: • Univerzalni CNC krmiljen stroj za vrtanje in vstavljanje moznic • Nadzor brizganja lepila prek GIC • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijsko dodatna horizontalna in vertikalna vrtalna vretena Codpfxedx Axfo Aiqjhc • Razbremeni CNC obdelovalne centre • Optimalna dopolnitev strojem za razrez po gnezdenju