Varilne naprave nakup rabljenega (404)

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, SAW Welding System (Submerged Arc Welding/SAW) with Process Controller A2–A6 and ESAB LAF 635 DC Year of manufacture: 2000 Condition: Good, fully operational (from educational facility) For sale is a high-performance submerged arc welding system (SAW) consisting of the ESAB DC power source LAF 635 and A2–A6 Process Controller (depending on model, PEH/PEK system). The system comes from an educational institution and was mainly used for training purposes – typically well maintained and regularly inspected. Ideal for automated/mechanized submerged arc welding, e.g., in steel construction, tank/vessel fabrication, pipe/profile manufacturing, overlay welding (depending on welding head/tractor/gantry – if available). Technical Data – ESAB LAF 635 DC (Power Source) Device type: Remote-controlled 3-phase DC welding power source for SAW (Submerged Arc Welding) and mechanized MIG/MAG. Power supply: 400/415 V, 3~ 50 Hz (alternatively 440 V, 3~ 60 Hz) Duty cycle: 630 A / 44 V at 100% Adjustment range: 75 A / 18 V to 800 A / 44 V (46 V) Open circuit voltage: 54 V No-load power: 150 W Efficiency: 0.84 Power factor (cos φ): 0.90 Protection class: IP23 Weight: approx. 260 kg Dimensions (L × W × H): 652 × 483 × 800 mm (or 652 × 483 × 916 mm incl. base) Fusing/Power data (reference as per manual): e.g., 63 A slow-blow, supply line 4 × 16 mm², mains current at 100% 52 A (at 400/415/440 V) Technical Data – A2–A6 Process Controller (PEH/A2–A6) The A2–A6 Process Controller is used for operation/control of the mechanized welding system and is designed for SAW applications. Rated voltage (powered from welding source): 42 V AC, 50/60 Hz Rated power: max. 900 VA Motor connections: for ESAB A2 or A6 motors Motor current: 5 A continuous, max. 10 A Wire feed regulation: internal EMF regulation or with AC tachometer (6 pulses/rev) Itedpfx Adex Ru Tgoked Condition & Origin Good, well-maintained condition (educational/training environment) System is fundamentally designed for industrial use (mechanized SAW / MIG/MAG) ESAB LAF 635 DC Power Source A2–A6 Process Controller (operation/control unit)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: omejena funkcionalnost, vrsta vhodnega toka: trifazni, skupna višina: 1.100 mm, skupna širina: 650 mm, skupna dolžina: 1.000 mm, skupna masa: 230 kg, trajanje garancije: 24 meseci, vrsta hlajenja: voda, višina izdelka (maks.): 8 mm, Glorystar Laser POVSEM NOVA serija GW-H ročnega laserskega varilnega stroja 1000-3000W Serija GW-H je ročni laserski varilni stroj, namenjen varjenju različnih kovinskih pločevin in cevi. Opremljen je z vlakenskim laserjem z možnostjo izbire moči od 1000 do 3000 W, primeren za obdelavo nerjavečega jekla, ogljikovega jekla, aluminija, medenine in drugih kovin do debeline 8 mm. Stroj vključuje: - Dobro ohranjen, z vsemi priročniki in dodatki - Na voljo z enojnim ali dvojnim podajalcem žice Itedouc S A Espfx Adkjd - Laserski vir MAXPhotonics / Raycus - Varilna pištola z 4 funkcijami: varjenje, čiščenje zvarnega šiva, čiščenje, rezanje - Integriran hladilni sistem - Upravljalna plošča na dotik - 24-mesečna garancija - 4 delovni načini: varjenje, čiščenje zvara, rezanje, čiščenje - Teža varilne glave: 1 kg - Način hlajenja: vodno hlajenje - Zaščitni plin: dušik ali argon - Primerni materiali: Nerjaveče jeklo, aluminij, baker, jeklo, lotanje itd.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Prodajam tukaj 1–10 kompletov Iedpfsyr Idtsx Adkstd Znamka: Miller Model: Proheat 35 – skoraj kot novo. Grelec hrane z indukcijskim grelnim elementom, 400–460 V, oznaka CE Nova cena kompleta: 54.000 evrov Prodaja samo B2B + DDV ali neto za izvoz Pridržujemo si pravico do napak.

Stanje: skoraj kot novo (rabljeno), EWM acticARC Tetrix T352 AC/DC Robot varilni aparat WIG/TIG z hladilno enoto cool Zelo dobro ohranjen Zelo malo uporabljen Prevzem: 74722 Buchen. Pošiljanje znotraj Nemčije možno za 100€ bruto. Rabljeno blago – običajne sledi uporabe, popolnoma delujoče. Itsdpfxsyilubo Adksd Dodatne informacije in slike na zahtevo.

Stanje: novo, Leto izdelave: 2026, Oprema: dokumentacija / priročnik, Laser welding machine with 3 kW laser power, laser components from Siemens. The welding machine comes with genuine CE certification, including a German manual, risk analysis, and all necessary documentation required for operating a laser welding system in Germany. The wire feeder case, also with genuine CE certification, is included in the scope of delivery. Training can be provided on-site at our company. Ijdpen Sl D Rsfx Adkotd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tucker / Emhart Stud Welding System – DCE1500 + ETF50D + EFM2100 Handheld Stud Welding Gun Manufacturer: Emhart Teknologies / Tucker GmbH System consists of: - DCE1500 Control & Power Unit Itedpfx Asx Thg Sedked - ETF50D Stud Feeding Device - EFM2100 Handheld Stud Welding Gun (Hand Tool) Made in Germany Description: This complete Tucker / Emhart stud welding system has been developed for manual stud welding and is commonly used in: - Body construction - Repair areas - Pre-series production - Manual workstations - Maintenance & rework The combination of automatic stud feeding, powerful energy supply, and an ergonomic hand-held welding gun makes this system ideal for: ✔ Manual spot stud welding ✔ Flexible workstations ✔ Applications where a robot cannot be used ✔ Rework on body and structural parts Technical Details (from name plates): 1️⃣ DCE1500 Control & Power Unit Part No.: T022 910/400 Power supply: 400 V – 50/60 Hz Type: DCE1500/5.021.20.05.0400.S Serial No.: 13/3705380250001 - Provides energy for stud welding - Process monitoring and control - Perfect for manual welding stations 2️⃣ ETF50D Feeder: Part No.: T044 067/400 Power supply: 400 V – 50/60 Hz Type: ETF50D.07.69/6.17-36F13.3 Serial No.: 08/2496740200001 - Automatic feeding of studs into the gun - Robust, fast, industrial grade 3️⃣ EFM2100 Handheld Stud Welding Gun: Part No.: T0580 Type: EFM2100.00.01/5.16F8 Serial No.: 10/2879300500091 - Handheld device, not a robot-guided head - Compact, ergonomic, highly reliable - Ideal for rework, repair, or flexible areas Typical Areas of Application: - Manual stud welding - Bodywork service - Repair and rework stations - Pre-series and prototype manufacturing - Mobile or small production cells

Stanje: novo, Leto izdelave: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power Output: 2 kW Country of Origin: China Number of Axes: 4 X-Axis Travel: 500 mm Y-Axis Travel: 300 mm Z-Axis Travel: 300 mm Worktable Dimensions: 350 mm × 450 mm Travel Speeds: Y-Axis: 10 m/min X-Axis: 10 m/min Z-Axis: 5 m/min Positioning Accuracy: ±0.02 mm Iedpfx Ajpq Nzasdkstd 4th Axis: Positioner Rotational Positioning Accuracy: ≤0.05 mm Power Supply: 220 V / 380 V Power Requirement: 7.5 kW Machine Dimensions: 500 × 1400 × 1900 mm Weight: 280 kg Chiller Welding Source: MAX Mounting Plate Welding Head Visual CCD Monitoring System – utilizes a high-resolution camera and monitor to improve welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components along straight lines, circles, and any arbitrary trajectory, e.g., for mobile phone casings, battery packs, sensors, medical devices, and various other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density ensure smooth, narrow weld seams and a small heat-affected zone.

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 27 h, Znamka: ABICOR BINZEL Tip: xFUME ADVANCED Leto izdelave: 2022 Ijdexgnidspfx Adkjtd Količina: 6 kosov Delovne ure: 27 Proizvajalec: ABICOR BINZEL Model: xFUME ADVANCED Število priključkov: 2 × Ø 60 mm Moč motorjev: 2 × 0,8 kW Podtlak: ca. 16.000 Pa Filter: PTFE kartuša, učinkovitost ≥ 99,95% Čiščenje filtra: pulzno s stisnjenim zrakom Funkcija avtomatskega start/stop: da (tokovna sponka) Dimenzije: ca. 370 × 370 × 940 mm Masa: ca. 40 kg Mobilnost: transportna kolesa

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stanley Tucker Stud Welding & Fastening System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System consists of: Control Unit / Power Supply: TE1500 (Part No. T028 618/400) Feeding Unit / Feeder: TF21D (Part No. T059 060) Stud Setting Tool: LM310 (Part No. T133 016) Made in Germany Description: This professional Tucker stud welding system is a complete industrial joining package for fully automatic setting of: - Weld studs - Press-fit studs - Fastening elements for bodywork - Structural and sheet metal connections Tucker / Stanley systems are used worldwide in automotive manufacturing due to their: - Extreme reliability - High precision - Long service life - Perfect integration capabilities in robotic cells. The system consists of: 1️⃣ TE1500 Control Unit / Power Supply - Powers the setting device - Controls process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeding Unit - Automatic supply & conveying of studs - Supply voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 Itodpfx Asx Tfypjdksd 3️⃣ LM310 Stud Setting Tool - Pneumatic / servo-assisted setting gun - Type: LM310/K.00.00 - For final placement / pressing / setting of studs - Network: “Stud 5.14” (system-specific input value) - Serial No.: 13/3850680080004 Technical Data (from type plates): Control Unit TE1500 - Supply voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeding Unit TF21D - Supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feeder for studs / fastening elements Setting Tool LM310 - Type: LM310/K.00.00 - High-precision setting module for body shop applications Typical Applications: - Automotive industry / OEM production - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet metal assembly - Joining technology for body parts - High-volume serial production

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Eurotronic MAG 4004 W MIG-MAG kompaktna naprava s tekočinskim hlajenjem Izvedba: - Z vodo hlajene MIG/MAG varilne naprave z inverter tehnologijo po EN 60974-1 in EN 60 974-10 - Brezstopenjska nastavitev varilnega toka prek sinergijskih nastavitev - Različni varilni programi in vrhunske funkcije za najboljšo zmogljivost - Pogon podajalca žice s 4-valjnim pogonom - Temperaturno krmiljen ventilator - Samodejni vklop/izklop vodne črpalke - Preprosto upravljanje prednje plošče z 2 gumboma Funkcije prednje plošče: - MIG varjenje - Hyper Force varjenje - MMA elektrodno varjenje - TIG Lift Arc Tehnični podatki: Iedeykvhkjpfx Adkotd - Območje varjenja - ED 100 % (v A): - ED 60 % (v A): 360 - ED 45 % (v A): 400 - Moč pogona podajalca žice - Mrežno varovanje - Teža kg 70

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, For sale: 1 set Kemppi FastMig MXF 67 Itjdpeyrr S Ijfx Adkjd Info: The Kemppi FastMig MXF 67 is a robust 4-roller wire feeder for 300 mm spools, designed for demanding industrial MIG/MAG welding applications. It offers 520 A (60% duty cycle) output, a feed speed of 0–25 m/min, an impact-resistant double-wall plastic housing, and is compatible with FastMig Pulse/Synergic/M power sources. Technical data (Kemppi FastMig MXF 67): Product group/code: 1693685 (or 6152200) Wire spool diameter: max. 300 mm / 20 kg Feed speed: 0–25 m/min Wire feed mechanism: 4 rolls (DuraTorque™) Output (60% duty cycle): 520 A Output (100% duty cycle): 440 A Wire diameter (Fe, Ss): 0.6–1.6 mm Wire diameter (Al): 1.0–2.4 mm Protection class: IP23S Dimensions: 590 x 230 x 430 mm Weight: approx. 11.1 kg Key features: Housing: Extra-rugged double-wall plastic housing for demanding industrial environments. Compatibility: Suitable for FastMig M, Pulse, and KMS power sources. Options: Compatible with SuperSnake GT02S/SW for extended reach. Control panels: Compatible with MR 200/300 (Regular) or MS 200/300 (Synergic) panels. Functions: Delivers precise wire feeding and is designed for torches with a Euro central connector. The MXF 67 (Product code 6152200) is ideal for heavy-duty welding applications and can be used with matching models such as the FastMig M. (23 additional sets available). Inspection welcome near D-24983 Handewitt. More information available upon serious inquiry. Subject to prior sale and typographical errors.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, obratovalne ure: 4 h, številka stroja/vozila: 84149090, Complete containerized station with a screw compressor, designed for industrial operation, equipped with a full air treatment system. Ready for immediate commissioning. Only 4 hours of test run time. CONTAINER 10" Specifications Compressor Ervor Rafale 50 SP (2016) – oil-injected screw, fixed speed Motor power 37 kW (50 HP) Flow rate (FAD) ~260 Nm³/h at 7–9 bar Drive Belt drive with automatic tensioner Power supply 400 V / 3-phase / 50 Hz Dryer Twin-tower adsorption dryer, regenerated, timer or DP controlled Aftercooler Air-cooled aftercooler with ventilation Filtration Pre-filter, fine filter, and final filter class 1 μm / 0.01 μm Container 10 or 20 ft, steel, ventilated, insulated, with service doors Control Control panel + pressure switch, hour meter, phase protection Technical condition Very good Iodpfow D Ut Hox Adkstd Cold regenerated adsorption dryer ERVOR adsorption dryer – twin-tower air drying system Integrated in the container station. Suitable for continuous operation, with automatic bed regeneration. The set also includes an aftercooler and complete filter package (pre, fine, and final). The system is ready for use in industrial or military applications. Final dew point: ≤ -40°C PDP (pressure dew point) Air treatment and cooling system The station is equipped with a multi-stage compressed air purification system, including: - 3-stage filtration (solid particles, oil, moisture), - Aftercooler with fan, - Insulated and serviced piping, - Monitoring manometers, ball valves, service bypasses, - The system is designed for operation in heavy-duty industrial and mobile environments. Additional photos or a short video available upon request. Feel free to contact for purchase.

Stanje: rabljeno, This is an SKS welding power source LSQ5X. The scope of delivery includes: 1x Welding power source LSQ5X 1x SKS Frontpull 8 (23°) 1x SKS Power Feeder PF5 Itsdpfx Asuxlz Ajdkod 1x Powerclutch HD collision protection 1x Welding process controller Q80

Stanje: rabljeno, This is an LSQ5X welding power source from SKS Welding Systems, together with a MULTIPROCESS - Q80 weld process controller and an SKS Frontpull 8 (23°). Iedpsuxbx Dofx Adkjtd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Version: Professional, Laser power at workpiece: 1500W, Integrated pilot laser, Wavelength (nm): 1075 ± 5, Programmable memory slots: 9, Wi-Fi. The condition is as new. Iodpforwzruex Adketd

Leto izdelave: 1995, stanje: rabljeno, 1 used, well-maintained water-cooled MIG-MAG shielding gas welding machine Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical Data: - Welding current range up to 500 A - Weight approx. 250 kg Accessories / Special Features: - Water cooling - Separate ARTEC DV-W1 wire feeder with 4-roll wire drive - Includes hose package, pressure regulator, and ground cable For more technical details, see images! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel Iodjb Nd E Repfx Adkjtd

Stanje: dober (rabljeno), Naprodaj dva WIG varilna aparata Messer Griesheim UNITIG GW 450. Isdju Sqi Sjpfx Adketd Z vodnim hlajenjem, zanesljiva tiristorsko-transformatorska tehnologija, enostavno upravljanje, predplinjenje – naknadni plin, prisilni izklop, postopni izklop (ramp-down), zapolnitev kraterjev, primerno za vse materiale vključno z varljivim aluminijem, HF-vžig, varjenje s palično elektrodo, 1–6 mm, amper meter, preklop na penetracijo Alu + točke, pravokotni sinus v AC Super Alu območju Teža: 420 kg Cena velja za en varilni aparat.

Stanje: dober (rabljeno), Prodajamo Merkle W 300 DC TIG varilni aparat na enosmerni tok TIG območje enosmernega toka: Napetost v prostem teku: 80 V Delovna napetost: 10-22,8 V Varilni tok: 5-320 A HSB 60 % delovni cikel (10 min): 320 A Isdpfx Adju Sqqijkjtd HSB 80 % delovni cikel (10 min): 300 A DB 100 % delovni cikel: 260 A (pri 40°C) Primarna trajna moč: 9,5 kVA Primarni trajni tok: 13,7 A Primarni maksimalni tok: 19 A Teža: 130 kg Mere (D x Š x V): 910 x 600 x 910 mm z nosilcem za plin jeklenko

Stanje: dober (rabljeno), Prodajamo WIG varilni aparat ESS TIGARC 300 Itjdpsu Sr Upjfx Adksd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Welding machine, manufacturer: DALEX, model: VARIO MIC 400L, year of manufacture: 1999. In very good condition, seldom used. Iodpfx Adefgvvaokstd

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, Stroj je komaj rabljen in popolnoma funkcionalen. Itsdpfx Aoyfnd Hedkjd

Stanje: novo, Leto izdelave: 2026, Compact device utilizing FIBER technology, designed for welding various types of metals with precision significantly surpassing traditional welding methods. The advanced technological solutions used in this welder enable the production of high-quality, consistent welds on thin-walled materials and components without the risk of deformation. Advantages of the laser welder - User-friendly – thanks to well-thought-out design and implemented solutions, the operator can begin work after a short training period - Minimal indirect radiation – during operation, it is sufficient to use protective glasses for filtering intense light - Much faster welding compared to traditional methods – efficiency can increase up to 3 to 10 times - Concentrated beam: negligible structural change due to the small heat-affected zone - Consistent weld quality – weld seams are visually appealing and provide high strength - Enables welding of very thin materials, such as 0.5 mm stainless steel - Option for welding with or without filler wire Maximum power: 2000 W Laser wavelength: 1080 nm Penetration depth (stainless steel at 1 m/min): 4.57 mm Penetration depth (mild steel at 1 m/min): 3.59 mm Penetration depth (aluminum at 1 m/min): 4.0 mm Penetration depth (brass at 1 m/min): 4.0 mm Welding speed: 0–120 mm/s Automatic wire feeder: Ø 0.8 – 1.6 mm Maximum power consumption: ≤6.0 kW Cooling system: water-cooled Operating voltage: 400V Shielding gas consumption: 20 L/min Dimensions: 600 x 1100 x 1100 mm Approximate weight: 185 kg LATEST GENERATION WELDING HEAD - WOBBLE-type head - Automatic wire feeder included - Adjustable spot size: 0–5 mm - High-power welding head allowing multiple beam patterns: ○,―,•, ꓷ, 0, ▲, 8 - Integrated connections for shielding gases and cooling system - Interchangeable nozzles allow welding at various angles - 10 m fiber optic cable connecting the head to the source - Adjustment of welding parameters directly on the head without the need to approach the control panel - Fully ergonomic design – the lightweight and flexible head allows welding even in hard-to-reach places - Easy to service – quick and hassle-free replacement of the protective lens Equipped with automatic wire feeder The wire feeder system is synchronized with the welding machine’s software. The purpose of the feeder is to deliver filler material so the operator can fully focus on working with the welding head. Set includes: Itsdpeizr Rlofx Adkod - Laser welder with built-in cooling system - Welding gun with focus adjustment and complete accessories - Fiber laser source - Automatic wire feeder - Complete set of cables - Starter kit of nozzles and protective glasses THICKNESSES OF WELDABLE MATERIALS Material | WELDING POWER 1000 W 1500 W 2000 W Stainless steel 0.5–3.0 mm 0.5–4.0 mm 0.5–5.0 mm Mild steel 0.5–2.5 mm 0.5–3.5 mm 0.5–4.5 mm Galvanized steel 0.5–2.5 mm 0.5–3.0 mm 0.5–4.0 mm Aluminum 0.5–1.2 mm 0.5–1.8 mm 0.5–4.0 mm Brass 0.5–1.2 mm 0.5–1.8 mm 0.5–2.5 mm

Stanje: novo, Leto izdelave: 2026, We present the latest model of the industrial laser welder, the CORMAK WL3000, which combines advanced FIBER technology with innovative design solutions, delivering unparalleled precision and performance. This unit is intended for welding various types of metals, ensuring top-tier weld quality and repeatability. Thanks to its 3-in-1 functionality—welding, cutting, and laser cleaning—the machine is versatile and efficient across numerous industrial applications. Key Features and Benefits - Advanced Cooling System: The new, highly efficient water cooling system maintains optimal operating temperatures, enabling longer runtimes without interruption and extending the machine’s service life. - Innovative Design: The ergonomic, lightweight welding head allows for welding even in hard-to-reach areas. Adjustable spot size (0–5 mm) and interchangeable nozzles provide full control over the welding process. - User-Friendly: Thoughtful design and implemented solutions allow operators to become productive after only a short training session. Itjdpfekkbw Ujx Adked - Low stray radiation: Protective laser safety glasses are sufficient during operation, as indirect radiation is minimal. - Substantially faster welding compared to traditional methods; productivity can increase by 3 to 10 times. - Focused beam: Minimal heat-affected zone results in negligible structural changes. - Weld consistency: Consistent seams, aesthetically pleasing welds, and high-strength joints. - Capable of welding very thin materials, such as 0.5 mm stainless steel. - Option for wire or wire-free welding. - Integrated laser cleaning function increases the range of application. - Cutting capability: Delivers excellent cut quality without additional mechanical processing. Technical Specifications - Maximum Power: 3000 W - Laser Wavelength: 1070 nm - Fiber Length: 10 m - Operating Modes: Continuous / Modulated - Air Pressure: 10–15 L/min - Welding Speed: 0–215 mm/s - Automatic Wire Feeder: Ø 0.8–2.0 mm - Maximum Power Consumption: ≤11.0 kW - Focal Length: 150 mm - Cooling System: Water-cooled - Operating Voltage: 400V - Shield Gas Consumption: 20 L/min - Dimensions: 600 x 1100 x 1100 mm - Weight: approx. 207 kg

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Complete Orbital Welding System: OWC Plus Control Unit + Inverter T 180 + CWH 53 Welding Head Ijdpoyg R Svsfx Adkotd Description: For sale is a high-quality, complete orbital welding system by Orbitalservice GmbH. This package includes the control unit, power source, cooling system, and a closed welding head with accessories. Ideal for precision tube and pipe welding. German-made quality. Included components: 1. Control Unit & Inverter: - OWC Plus Orbital Welding Controller: Modern control unit (weight: 2.5 kg). - Inverter T 180 Basic Plus – DC: Powerful power source (3 A – 180 A), weight: 12.2 kg. - Power cable: For connection between power source and controller (80 cm). 2. Cooling System: - Water Cooling Unit WUK 7 Plus: 230 V version, includes two self-closing couplings (weight: 16.2 kg). 3. Welding Head & Accessories: - Closed Welding Head CWH 53: For outer tube diameters from 6 mm to 53 mm. Includes drive unit and 8 m torch/hose package. - Clamping Jaw Set: Spring-actuated set for the CWH 53 (outer diameter 19.0 mm), consists of 4 halves made of high-strength aluminium. 4. Additional Accessories: - Remote Cable Control RC plus+: 8 m cable, suitable for AVC-OSC. - Argon Pressure Regulator: Triple output, chrome-plated brass. - Gas Hose: 3 m for OWC Plus controller. Technical Details: Manufacturer: Orbitalservice GmbH / Made in Germany Original list price: approx. €15,900 (before discount, according to offer) Condition: [Please insert current condition here, e.g., "The system is from 2018, has had little use, and is fully operational."] Price: €6,500 plus VAT Location: PL 2 units available. Scope of delivery: Complete system as described above. More pictures available on request. Can be collected in Poland or shipped via freight forwarding by arrangement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4300 cutting hours This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO2, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with PRIMACH 20 L control unit. Itodpfx Adjivg Hgekjd