Varilne naprave nakup rabljenega (404)

Stanje: rabljeno, WIG Welding Machine DALEX Type GL/W 201 TIG Welding Machine Machine No.: 201 Year of manufacture: approx. 1995 Output 200 amps at 35% duty cycle Isdpfx Adsi E Izvekjhw 160 amps at 60% duty cycle 120 amps at 100% duty cycle Continuously variable adjustment range Current type: DC (direct current) Power supply: 400 Volt, 50 Hz, 5.9 kVA, 32 amp plug - 2-stroke and 4-stroke welding modes - TIG torch package 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for stick electrodes - Fan cooling - Connection socket for foot pedal (without foot pedal) Required space (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg Welding test produces very good results when welding stainless steel with direct current. Otherwise in very good condition as well.

Stanje: rabljeno, Inverter welding unit for manual metal arc welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding unit, stick electrode inverter Serial No. IEC 60974 Year of manufacture: 2020 Performance with mains supply 400 V (40% duty cycle): 280 amps Performance with mains supply 400 V (60% duty cycle): 200 amps Performance with mains supply 400 V (100% duty cycle): 170 amps Performance with mains supply 230 V (40% duty cycle): 200 amps Performance with mains supply 230 V (60% duty cycle): 180 amps Performance with mains supply 230 V (100% duty cycle): 150 amps Current range: 5-280 amps, stepless adjustment Power connection: 230 / 400 volts, 50 Hz - Operating voltage from 110 to 480 volts AC - Fully automatic adaptation to the supply voltage - Equipped with 16A CEE plug for 400V mains supply - Hot-Start function (optimized ignition for easier arc striking, especially with hard-to-strike electrodes) - Anti-Stick function (prevents electrode sticking and improves electrode handling) - Arc-Force function (optimizes arc stability and penetration) - Digital display - Socket for remote control connection - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Suitable for all types of stick electrodes up to Ø 5 mm - TIG-DC welding (TIG torch not included) - The unit may be connected to a flexible three-phase supply between 110 V and 480 V, or to a fixed three-phase 400V supply (50 - 60 Hz) plus earth conductor. This device may only be connected to a 4-wire, 3-phase power system with grounded neutral. Ihjdpevg Rh Tsfx Adkew Dimensions (unit without cables) L x W x H: 470 x 270 x 430 mm Weight (without cables): 23 kg New, unused

Stanje: rabljeno, TIG welding machine, TIG welder NIMAK type GS 200 W TIG and DC stick welding machine, also suitable for MMA (manual metal arc) electrodes Serial No. 26642, Year of manufacture approx. 1983 Output: 200 amps at 60% duty cycle 150 amps at 100% duty cycle Steplessly adjustable power range Power supply: 380 V, 50 Hz, 32 A plug Ihjdpfx Adedzqbvskjw - 5 m TIG torch package - HF ignition - Stepless current adjustment and current rise control - Connection for stick electrode welding - DC only - Water cooled - Shielding gas pressure regulator Required space (L x W x H): 900 x 590 x 1000 mm Weight: approx. 200 kg Good condition

Stanje: rabljeno, WIG сварочный аппарат MESSER GRIESHEIM Тип Combitig GW 23 AC/DC Устройство работает только на сварке постоянным током и контактном поджиге. Заводской номер: 445276 Год выпуска: примерно 1990 Мощность: 230 A = 35% ПВ 180 A = 60% ПВ 140 A = 100% ПВ Диапазон регулировки: плавный Вид тока: постоянный (DC) Сеть: 400 В, 50 Гц, вилка на 32 А - 2-тактный / 4-тактный режимы сварки - Сварка постоянным током с контактным поджигом работает - Сварка переменным током и высокочастотный поджиг не работают - 7-метровый шланговый пакет с WIG-ручной горелкой - Разъем для подключения выносного потенциометра (педаль) – без педали Iodpfx Aodzqa Iedkehw - Воздушное охлаждение - Газовый редуктор в комплекте Габариты (Д x Ш x В): 850 x 480 x 600 мм Вес: около 90 кг В результате тестовой сварки по нержавеющей стали на постоянном токе получены хорошие результаты; высокочастотный поджиг не работает, но дугу можно зажечь коротким контактом. При сварке алюминия на переменном токе дуга не возникает.

Stanje: rabljeno, TIG welding machine, electric welding unit DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture: approx. 1975 Output: 225 amps = 60% duty cycle 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Ihodpfx Aodzqacjdkew Current type: Direct and alternating current (AC-DC) Power supply: 380 V, 50 Hz - Power setting via 5 coarse steps and stepless fine setting via rotary potentiometer - 2-stroke and 4-stroke welding modes - Remote control with rotary potentiometer for fine adjustment - Digital amperage display - TIG torch package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Stanje: rabljeno, E-welding unit, stick electrode welding machine ESAB type LTG 250 Machine no. 736-820-387 Year of manufacture: 1997 Output: 250 amps at 35% duty cycle 190 amps at 60% duty cycle 150 amps at 100% duty cycle Output adjustment: stepless - Electrode holder with 6 metre connection cable - Direct current - Fan cooling - Possible TIG welding capability, without torch package Mains connection: 380 volt, 50 Hz, 32 amp plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition Ihodpfxsd N E Rve Adkow The machine was originally also designed for TIG welding. The TIG torch package is not included, and this function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is sold only as a stick electrode welder. A welding test with stick electrodes yielded very good results.

Stanje: rabljeno, 1 rabljena varilna naprava Znamka: Fronius Tip: Synergic 3400 G/W/E Za varjenje jekla, nerjavečega jekla in aluminija z MIG/MAG postopkom. Tehnični podatki: Maks. varilni tok: 340 A Možni premeri žice: 0,8/1,0/1,2 mm Priključna napetost: 380 V Obratovalni cikel (ED) 35%: 340 A Ihedpfx Asyl Id Tjdksw Digitalni prikazovalnik Dimenzije (D x Š x V): 890 x 460 x 945 mm Skupna teža: 139 kg

Stanje: rabljeno, Tehnične podrobnosti: Poraba moči: 350 A Ihjdpou Nwd Defx Adkow Skupna potrebna moč: 17,5 kVA Približna teža stroja: 64 kg Dimenzije stroja: 0,65 x 0,32 x 0,5 m Varilni usmernik/inverter MIG/MAG: 40A / 14V do 350A / 31,5V TIG: 10A / 10V do 350A Ročno obločno varjenje: 15A / 20,5V do 350A / 34V Napetost U1: 380 - 415V Vrsta hlajenja: F (vodno hlajeno) Stopnja zaščite: IP 23 Brez paketov cevi Brez ozemljitvenega kabla

Stanje: zelo dobro (rabljeno), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique control concept for step-regulated devices developed by Rehm: Arc length is regulated not only by measuring the welding voltage and current, but also through digital specification of wire feed speed. This allows for outstanding welding results and ensures the machine is easy and safe to operate. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures excellent arc ignition properties and high arc stability during welding. Manual fine adjustment can be made using the SDI knob. This enables control over heat input, which can have a positive influence on the amount of post-weld processing required. - RSC – Realtime Speed Control Ihodpfxev Nrfxj Adkew Digital monitoring and regulation of wire feed speed with high precision and in real time. Thanks to RSC, changes in arc length are compensated more quickly and efficiently. - CCM – Characteristic Curve Memory The integrated database holds welding parameter knowledge from experts. By selecting the wire type, diameter, and welding voltage, the machine automatically synergizes preset welding parameters. During welding, actual parameter values are compared with set parameters and corrected instantly if necessary. - RMI – Rehm Machine Interface The machine’s control panel is extremely straightforward, preventing selection errors. Simple parameter selection facilitates the welder’s work, minimises mistakes, and shortens setup time.

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding System LWH-3000-N Relfar FWH20-S10A Scope of delivery: - Laser welding unit with cooling system - Welding gun with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter package including nozzles and protective lenses Technical parameters: - Laser power: 3000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head holder): 630x1300x1500 mm Ihodpfx Adoup Uzxokew Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and training Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning Otinus laser welding units are supplied with a range of nozzles and protective lenses. This makes the unit extremely versatile and allows cost savings, for example by eliminating the need for a handheld plasma cutter and an additional device for rust and paint removal. Operation: Thanks to the revolutionary welding system, any operator can achieve high-quality results after brief training. The cable allows the welder to work freely at several positions without moving the device. The small heat-affected zone prevents excessive deformation. The weld seam is applied quickly and efficiently, resulting in a correct and robust weld. Intended Application: The laser welding device is designed for professional use in workshops requiring high-quality and aesthetically pleasing welds. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminium: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Design: The torch cable allows maximum freedom of movement and facilitates welding in various positions. The integrated controller with a large, clear display is intuitive to operate. The device features a high-performance cooling system, ensuring reliable operation under tough conditions, such as continuous multi-shift work. Operating Principle: The laser welding system uses laser heat to melt the welding wire and the edges of the parts to be joined. The focused beam targets the wire, which is automatically fed into the weld pool, as well as the joint area. When the trigger is pulled, the welding gun must be moved along the seam at the appropriate feed rate. A constant working temperature for both the laser source and the welding gun is maintained via a water-cooled circuit. Laser output and cooling are controlled by an onboard controller that monitors and adjusts parameters based on operator input.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the basic version of the machine. All special equipment and their prices can be found on our website. Handheld Laser Welding Machine LWH-1500-N RayTools Scope of delivery: - Laser welding unit with cooling system - Welding gun with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics - Automatic wire feeder - Hose and cable set - Starter package with nozzles and protective lenses Technical Specifications - Laser power: 1500 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with welding gun holder): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): Commissioning and Training Operation Thanks to the revolutionary welding system, any operator can achieve quality results after a short training session. The cable allows the welder to work freely at multiple points without moving the unit. The small heat-affected zone prevents excessive distortion. The weld seam is applied quickly and efficiently, resulting in a correct and robust weld joint. Intended Use This laser welding machine is designed for professional use in businesses that require high-quality and aesthetically pleasing weld seams. Laser source specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8–1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminium: 4 mm - Brass: 2 mm Iedpsthigrsfx Adkjhw 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Design The welding gun cable provides extensive freedom of movement, making it easier to weld in various positions. The integrated controller with a large, clear display is intuitive to operate. The device is equipped with a powerful cooling system, enabling operation under demanding conditions in three-shift operation. Operating Principle The laser welding machine melts the welding wire and the edges of the workpieces to be joined using laser heat. The beam is focused and directed at the welding wire, which is fed by the wire feeder, and at the contact point. When the trigger is pressed, the welding gun must be moved along the weld seam in accordance with the wire feed speed. Constant working temperatures for the beam source and welding gun are maintained by a water-cooled circulation system. Beam power and cooling are controlled via a controller that adjusts the settings according to the user's parameters.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the machine’s basic version. All optional equipment and their respective prices can be found on our website. Handheld Laser Welding Machine LWH-2000-N RayTools Scope of delivery: - Laser welding unit with cooling system - Welding torch with adjustable focal length and accessory kit - Fiber laser source by MAX Photonics - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective glasses Technical specifications: - Laser power: 2000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with torch holder): 630x1300x1500 mm Included in the price: One-day operator training and commissioning of the machine - Day 1 (up to 8 hours) - Commissioning and training Operation: Thanks to the revolutionary welding system, any operator can achieve excellent results after a short training. The cable allows the welder to work freely at multiple spots without moving the device. The small heat-affected zone prevents excessive deformation. Weld seams are applied swiftly and efficiently, resulting in a robust and proper weld. Isdpethit Ejfx Adkjhw Application: The laser welding machine is designed for professional use in workshops requiring high-quality and visually appealing welds. Laser source specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminium: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Construction: The torch cable provides a high degree of freedom of movement and facilitates welding in different positions. The integrated controller, equipped with a large and clear display, is easy to operate. The unit features a powerful cooling system, enabling use under harsh three-shift operation conditions. Operating principle: The laser welding unit melts the welding wire and the edges of the workpieces using laser heat. The beam is focused and directed towards the welding wire—which is fed automatically—and the contact area. When the trigger is pressed, the welding torch must be guided along the weld line at the wire feed rate. A consistent operating temperature for the beam source and torch is maintained by a water-cooling system. Laser output and cooling are managed by a controller, which regulates settings according to user parameters.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Handheld Laser Welding Unit LWH-3000-N RayTools Scope of supply: - Laser welding unit with cooling system - Welding gun with adjustable focal length and accessory set - Fiber laser source from MAX Photonics or Raycus Iedpjrumymofx Adkshw - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective lenses Technical parameters: - Laser power: 3000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with welding head holder): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours) – commissioning and operator training Operation: Thanks to the revolutionary welding system, every user can achieve quality results after a short training. The cable allows the welder to work freely in multiple locations without moving the unit. The small heat-affected zone prevents excessive deformation. The weld seam is applied very quickly and efficiently, resulting in a correct and robust weld joint. Intended use: The laser welding unit is designed for professional use in workshops that require high-quality and aesthetically pleasing welds. Laser source specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Design: The welding gun cable enables extensive freedom of movement and facilitates welding in various positions. The integrated controller with a large, clear display is user-friendly. The device is equipped with a powerful cooling system, ensuring operation under harsh conditions in three-shift mode. Operating principle: The laser welder melts the welding wire and the edges of the workpieces to be joined using laser heat. The beam is focused and directed towards the welding wire, which is fed in via the wire feeder, as well as towards the contact point. When the trigger is pressed, the welding gun must be moved along the weld seam at the wire feed speed. Constant operating temperature of the beam source and gun is ensured by a water-cooling circuit. The radiation output and cooling are regulated by a controller, which monitors the values according to user parameters.

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding Machine LWH-2000-N Relfar FWH20-S10A Scope of delivery: - Laser welding machine with cooling system - Welding gun with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective lenses Technical specifications: - Laser power: 2000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours) – commissioning and training Ihsdpsh H Ngtsfx Adkjw Relfar FWH20-S10A welding head – welding, cutting, and cleaning Otinus laser welding machines are delivered with a set of nozzles and protective lenses. This makes the device extremely versatile and allows for cost savings, as the need for a handheld plasma cutter and a separate rust and paint removal tool is eliminated. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a short training session. The cable allows the welder to work freely in multiple locations without moving the machine. The small heat-affected zone prevents excessive distortion. The weld seam is applied quickly and efficiently, resulting in a proper and robust welded joint. Intended use The laser welding machine is designed for professional use in workshops that require high-quality and aesthetically appealing weld seams. Laser source specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminium: 2 mm - Brass: 0.8–1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminium: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminium: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminium: 7 mm Construction The welding gun cable provides high flexibility and facilitates welding in various positions. The built-in controller with a large, user-friendly display is intuitive to operate. The unit is equipped with a powerful cooling system, making it suitable for operation under harsh conditions, including three-shift operation. Operating principle The laser welding machine melts the welding wire and the edges of the workpieces with laser heat. The beam is focused and directed at the welding wire, which is advanced by the feeder, as well as the joining area. When the trigger is pressed, the welding gun must be moved along the seam at a speed matching the wire feed. A constant operating temperature for the beam source and welding gun is ensured by a water-cooled system. The output and cooling are controlled by a controller that regulates parameters according to user settings.

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding Machine LWH-1000-N Gefasst SUP 20S Scope of Delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - MAX Photonics fiber laser source - Automatic wire feeder - Hose and cable set - Starter package with nozzles and protective lenses Technical Parameters - Laser power: 1000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the Price One-day operator training and machine commissioning - Day 1 (up to 8 hours) – Commissioning and training Gefasst SUP 20S Welding Head – Welding and Cutting Otinus laser welding machines are supplied with a range of nozzles and protective lenses. This makes the device extremely versatile and saves money, as the need to purchase a handheld plasma cutter, for example, is eliminated. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training period. The cable enables the welder to work flexibly at multiple locations without having to move the machine. The small heat-affected zone prevents excessive deformation. The weld seam is produced quickly and efficiently, resulting in a strong and precise weld connection. Intended Use The laser welding unit is designed for professional applications in workshops that require high-quality and visually appealing welds. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm Ijdpfx Adshufigskohw - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Construction The torch cable allows for great freedom of movement and facilitates welding in various positions. The integrated controller with a large, user-friendly display is intuitive to operate. The unit is equipped with a high-performance cooling system, ensuring reliable operation in demanding environments and 24/7 shift work. Operating Principle The laser welding machine melts the welding wire and the edges of the components to be joined using laser heat. The laser beam is focused and directed towards the welding wire, which is fed through the automatic feeder, and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld seam in accordance with the wire feed speed. Consistent operating temperature for the laser source and torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which adjusts parameters as set by the operator.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free: Special offer only for customers who participated in a demonstration before purchase – in the Otinus machine showroom in Bydgoszcz. Handheld Laser Cleaner “2000W LCH-2000-N” Ijdpfx Adjthittokehw The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or disintegrate. Laser cleaners are used in a wide range of industries, from automotive to monument restoration. These systems are characterized by high efficiency, minimal waste production, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can offer greater precision and cost-effectiveness. The following services are included in the machine price: A one-day training session and machine installation; 1 day, up to 8 hours – installation and training concerning the control unit. Options MAX Photonics The “MAX Photonics” brand was founded in 2004. The company’s roots lie in the production of light and optical sources for scientific institutions. Quality and stability of product performance were defined as top priorities. The company quickly realized that the future of laser technology is closely linked to fiber optics. Research and development began in 2007, leading to the launch of its first 500W continuous wave source in 2014. Since then, the company has significantly expanded its technologies in the fields of laser cutting, welding, marking, and engraving. The company currently offers sources with output powers up to 40,000 W. At present, the company aims to be a leader in manufacturing industrial lasers with ultra-high power. Raycus “Wuhan Raycus Fiber Laser” was established in 2007. The company focuses on independent research and development, resulting from mergers with other firms. They produce laser sources for a wide range of applications including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: rabljeno, Leto izdelave: 1999, Zvarilna zmogljivost 40 - 350 / 12 - 40 A/V Ihodpfxjymp Sbo Adkow Največja napetost v prostem teku 56 V Varilni tok 100%: 300 A Hitrost žice 0 - 24 m/min Priključna moč 15,9 kVA Napetost 3 ~ 400 V Frekvenca 50 Hz Hlajenje: F Zaščitni razred IP 23 Teža stroja pribl. 153 + 22 kg Prostorska zahteva pribl. 1,10 x 0,60 x 1,15 m Varilni aparat CLOOS - GLC 353 MC 3 - vklj. kovček za pogon žice CLOOS - CK98 A

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 5277531, Offre 26039 Données techniques env. : - Course de travail / course de réglage horizontale env. 3 500 mm - Course de travail / course de réglage verticale env. 3 000 mm - Hauteur du mât env. 5 m - Déplacement, levage et déplacement latéral du mât motorisés, réglables en continu - Avance du chariot de soudage réglable en continu - Torche de soudage pivotante et inclinable - Pupitre de commande avec armoire de commande et câblage - Caméra pour la surveillance du procédé de soudage - Source de soudage STARMATIC 1003 DC jusqu'à 1 000 A - Mât de soudage STEITZ - Mât avec dispositif de rotation manuel - Trémie de flux pour soudage sous flux en poudre - Mât avec chariot sur rails motorisé pour rails au sol - Rails pour mât de soudage et dispositif de rotation de cuve 50 m - Dispositif de rotation de cuve motorisé avec chariot sur rails, capacité de charge 30 t Ihedpfx Adjychhyskjw - Raccordement 400 V

Stanje: rabljeno, Leto izdelave: 2022, Tehnični podatki: Tok: 9 A Skupna potrebna moč: 5 kW Teža stroja pribl.: 0,08 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Razred zaščite: IP 21 Vrsta hlajenja: AF l Priključek gorilnika: EURO-centralni priključek Ijdpfxoynhw Ss Adkohw 1 rabljena mobilna MIG-varilna naprava MERKLE RedMIG 2800 K

Stanje: rabljeno, Leto izdelave: 2018, Tehnične podrobnosti: Tok: 14 A Skupna potrebna moč: 8 kW Teža stroja cca.: 0,14 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Zaščita: IP 23 Varilni tok: 25-400 A Nastavitvene stopnje: 14 Ihedpfsynhizsx Adksw 1 rabljena premična MIG varilna naprava CompactMIG 400 Opis proizvajalca: Vsa krmilna elektronika za podajanje žice je zasnovana kot vstavek za upravljalno ploščo. Preprosta in hitra menjava je možna kadarkoli. Vsi električni priključki so izvedeni s priključnimi vtiči. Kompaktni sistemi (verzija KW) so pregledni in imajo varčen dizajn. 4-kolesni podajalni sistem DV-26 in kolut za žico sta nameščena ob strani in lahko dostopna. Vodna črpalka je servisno prijazno nameščena v stranskem prostoru.

Stanje: rabljeno, Leto izdelave: 2017, Tehnični podatki: Električni tok: 6 A Ihsdpeym Ur Hefx Adkjw Skupna priključna moč: 3 kW Približna teža stroja: 0,07 t Napetost: 3x 400 V Frekvenca: 50/60 Hz Stopnja zaščite: IP 21 Varilni tok: 25-200 A Vrsta hlajenja: AF 1 rabljena MIG MAG mobilna varilna naprava MERKLE RedMIG 2000 K Opis proizvajalca: ·Natančna nastavitev varilnega toka s 7 ali 14 prestavami. ·Načini delovanja: 2-taktni / 4-taktni / točkovanje / brezstopenjsko intervalno preklapljanje. ·Brezstopenjska nastavitev časa varjenja in časa pavze. ·Precizni podajalni menjalnik žice. ·Euro-centralni priključek. ·Standardno z možnostjo povratne žice. ·Transformator in izravnalna dušilka iz bakra, s toplotno zaščito. ·Spuščeno, pocinkano držalo za jeklenko za varen in stabilen položaj. ·Dovoljeno za uporabo v pogojih povečane električne nevarnosti, z znakom S. ·Enostavno premikanje z dvema velikima vodilnima in dvema fiksnima kolesoma.

Stanje: rabljeno, Technical details: Current: 16 A Total power requirement: 9 kW Machine weight approx.: 0.032 t Voltage: 3x 400 V Frequency: 50/60 Hz Protection class: IP 23 Welding process: MIG MAG Electrode Energy control: stepless on the unit, via TEDAC torch Adjustable parameters: choke effect, wire burn-back, ignition advance Iodjym Umwopfx Adkshw 1 used MIG MAG mobile welding machine MERKLE MobiMIG 321 K Manufacturer's description: The Merkle TEDAC system offers stepless remote energy control and display directly at the welding torch. With a slider button on the top of the TEDAC torch handle, the energy supply during welding can be increased or decreased. The currently set energy is shown directly on the TEDAC torch via a clearly visible, multi-colour LED display. The MobiMIG series devices are infinitely adjustable and feature single-knob operation (synergic mode). The clear display shows current, voltage, wire feed speed, and the a-dimension. Numerous proven welding programs for various materials and wire diameters are integrated. The MobiMIG 321 K offers more capacity, allowing the use of standard D300 spools with 15 kg wire.

Stanje: zelo dobro (rabljeno), Welding column 3x3m motorized, with movement control via push-button panel. Usable capacity: 3x3m Ihedpfx Aju Afwljdkjw Wire spool dispenser included. Lincoln Idealarc DC-600 submerged arc welding system with torch and flux hopper, plus Amperage and Voltage control panel Lincoln NA-3N. Submerged arc duty cycle: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input frequency: 50/60 Hz Input phase: 3 Power supply: 220/380/440V / 3 Ph / 50/60 Hz Output range: CV: 70A/13V – 780A/44V CC: 90A/24V – 780A/44V Rated output: 600A/44V/100% 680A/44V/60%

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Idealarc® DC-1000 Submerged Arc Welder Iedsu Afttspfx Adkshw Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Multifunkcijski varilni stroj (MIG, TIG, elektrode) Znamka: Kemppi Model: Pro 3000 / Promig 500 Stroj s hlajenjem z vodo in hladilnikom Kemppi PRO Cool 10. Enota za TIG/elektro varjenje Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcije za TIG varjenje: predplin, poplin, oblok, visoka frekvenca TIG generator Kemppi Pro 3000 Enota za MIG/žično varjenje Kemppi PRO MIG 500 - Delovni cikel: 500A – 60% - Kontrolna plošča Kemppi ML SYNERGIC - 4 pogonski valji - Impulzni obločni tok s Synergic panelom Ihsdpexf Hv Hjfx Adkjw - Posebne funkcije za varjenje jekla, nerjavnega jekla in aluminija Vključuje: - TIG varilna pištola - MIG varilna pištola - Masa - Regulator za plin