Horizontalne tračne žage – ročne – okroglo območje rezanja 221–299 mm nakup rabljenega (76)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, RABLJENA ROČNA REZALKA, BIANCO 370 M. OBNOVLJENA IN PREBARVANA. Cedpfxjzhupto Afdsrd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, RABLJENA ROČNA ŽAGA BIANCO 370. Csdpezhupajfx Afdsrd

Stanje: novo, Bandsaw with gravity descent MACC SPECIAL 411 CSO New CE The machine’s fundamental features (blade support rigidity, flywheel sizing, blade guides, blade tensioning) have been thoroughly studied to prevent blade fatigue, increase longevity, and improve cut straightness and speed. – Bandsaw with gravity descent motion of the saw bow controlled by a hydraulic circuit, manual bar feed and vise closing, manual head return – Vertical pivot rotation on play-free, adjustable taper roller bearings – Blade drive with two-speed motor and special gearbox with bronze gear and hardened, ground worm screw – Properly sized flywheels – Robust blade guides made with sealed guide bearings and adjustable carbide wear plates Codpfeficb Tex Afdord – Blade tensioning achieved via electromechanical device with micro-switch blade rotation control – Vise with rapid approach device – Safety devices on the blade cover, control handle, and blade – Hydraulic cylinder for controlled descent – Cutting thickness: 1.2 mm – Cutting range: 45° left, 60° right – Adjustable stop for identical-length cuts – 24V low-voltage electrical system – 0.06 kW electric coolant pump for blade cooling – Base equipped with chip collecting drawer and removable coolant tray – Machine prepared for pallet truck handling

Stanje: novo, Brand new from factory No. 1 available for immediate delivery!! “CE” Warranty Made in Italy Cutting Capacity: 0° = Round tube 230 mm – Square 220 mm – Rectangle 170 x 300 mm 45° = Round tube 200 mm – Square 180 mm – Rectangle 180 x 230 mm 60° = Round tube 130 mm – Square 120 mm – Rectangle 110 x 130 mm Crsdpfx Aofibfgjfdsd TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable tapered roller bearings, backlash-free. Blade drive by two-speed motor and special reduction unit with bronze gear and hardened/ground worm screw. Wheels appropriately dimensioned. Robust blade guides with sealed roller bearings and adjustable carbide plates. Blade tensioning by electromechanical device with micro-switch blade rotation control. Vice with quick-locking device. Safety features on driving wheel guard, control handle, and blade. Cut thickness 1.2 mm. Cutting angle range from 0 to 60° right. Adjustable stop for repeat cuts. Low voltage system 24 V. Coolant electric pump 0.06 kW for blade cooling. The main features of the machine (blade support rigidity, wheel sizing, blade guides, blade tensioning) have been carefully engineered to prevent blade deformation, increase blade life, and improve cut straightness and cutting speed.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Tračna žaga z napravo za rezanje pod kotom Proizvajalec: HESKA Tip: HSE 260 Leto: 1982. Stroj delno obnovljen z opornim stojalom, dokumentacijo in hladilnim sistemom. Obseg reza okroglo maks. 260 mm. Credpfjzictcox Afdjd

Stanje: novo, 1 brand new horizontal bandsaw with pivoting frame and double mitre (left/right) Manufacturer: HUVEMA / BEKA-MAK, Origin Türkiye Model: HU 230 DG-4 Cutting Capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 cutting speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special Features: • Bidirectional mitre cutting via pivoting frame o The material remains stationary in position! o No need to turn the workpiece for mitre cuts! o High efficiency with significant time savings! • Pre-set precision stops at 0°, 45°, and 60° left, and 45° right • Interchangeable work table • Quick-release vice, laterally adjustable left and right • Adjustable length stop, 500 mm, for repeat cutting • Saw arm descent infinitely adjustable via hydraulic cycle • Coolant system • Swarf brush • Swiveling control panel • Electric safety switch for blade tension and blade guard • End-of-cut shut-off • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Crsdpfefk Ew Eex Afdjd Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hitrost rezanja brezstopenjsko 20–70 m/min Tračna žaga 3660 x 27 x 0,9 mm Dolžina pomika 400 mm Območje reza – okroglo/kvadrat 250 / 250 mm Območje reza – pravokotno 300 x 260 mm Credszgdbiepfx Afdsd

Stanje: rabljeno, Leto izdelave: 2000, Condition: used Year of manufacture: 2000 Stock number: 6253 Delivery time: immediate, subject to prior sale Price: €1,900 In stock: 1 unit Saw frame: swivel frame Saw blade dimensions: 2480 x 0.9 x 27 mm Csdpfx Afoynmy Esdord Blade speed: 45 / 90 m/min Cutting capacity 0° round: 225 mm Cutting capacity 0° flat: 180 x 245 mm Cutting capacity 30° round: 100 mm, 100 x 100 mm Cutting capacity 45° round: 160 mm, 160 x 160 mm Working height: 935 mm Motor: 1.1 kW Length: 1500 mm Width: 700 mm Height: 1400 mm Weight: 225 kg Lowering by means of damping cylinder with control valve Coolant system Vise with quick-release lever Roller conveyor 2000 mm with manual stop 3 spare blades included Operating manual in English with CE declaration of conformity OPTIONS: Additional roller conveyors and saw bands available on request BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detail photos & functional videos showing actual condition • ON-SITE LIVE CHECK Live test at our premises • DIGITAL DEMONSTRATION Personalized live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Stanje: rabljeno, Leto izdelave: 2023, Used condition Year of manufacture: 2023 Stock number: 6242 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €5,400 In stock: 1 Saw Frame: Swing frame Cjdpfx Aswiqpzsfdord Saw blade dimensions: 2450x27x0.9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 220 mm Cutting capacity 0° square: 220 mm Cutting capacity 0° flat: 260x140 mm Cutting capacity 45° round: 160 mm, square: 155 mm Cutting capacity 60° round: 95 mm, square: 95 mm Working height: 965 mm Length: 1200 mm Width: 1100 mm Height: 1860 mm Weight: 240 kg Demo machine / as-new condition Net price (original price €6,730.00) Manual vise with quick-release lever Downfeed by gravity with adjustable damper 2 speeds Coolant system OPTIONS: Roller conveyors and saw blades available on request BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos & functional videos of actual condition • ON-SITE LIVE CHECK: Live test at our facilities • DIGITAL DEMONSTRATION: Personalized live demo via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Stanje: rabljeno, Leto izdelave: 1994, Semi-automatic horizontal bandsaw for solid materials and profiles Cutting capacity up to approx. Ø 260 mm Robust cast iron construction Manual feed and hydraulic cutting cycle Swiveling saw head for miter cuts Integrated coolant system Ideal for workshops and industrial use Cedpfxjwbfhce Afderd

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: MTP-BS260G-2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 260 mm, vrsta upravljanja: ročni, vrtilni razpon: 60 °, vrsta aktuacije: električni, največja hitrost vrtenja: 72 obr/min, vrtljajska hitrost (min.): 36 obr/min, skupna višina: 1.900 mm, skupna dolžina: 1.950 mm, skupna širina: 750 mm, skupna masa: 230 kg, Oprema: CE označba, dokumentacija / priročnik, motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, PONUDBA TEDNA – 5 % POPUST! # KOVINSKI TRAČNI ŽAGA MTP BS260G ### Profesionalni horizontalni tračni žaga za kovino s priklonom žaginega okvirja 0–60° Popolnoma nov kovinski tračni žaga MTP BS260G je zasnovana za natančno rezanje konstrukcijskega jekla, nerjavnega jekla, kislinoodpornega jekla, legiranih jekel in neželeznih kovin. Zaradi robustne konstrukcije, hidravličnega pomika in kakovostnega vodila tračnega lista je idealna za proizvodna podjetja, ključavničarske delavnice, izdelavo orodij, vzdrževalne oddelke ter splošni strojni inženiring. Nihajni žagin okvir omogoča izdelavo kotnih rezov od 0° do 60°, kar povečuje vsestranskost stroja. Hidravlični pomik zagotavlja enakomeren, natančen in ponovljiv postopek rezanja. ## Standardna oprema • Integrirana hladilno-mazalna naprava • Hidravlični cilinder s kontinuirno nastavljivo hitrostjo spuščanja • Mehanska napetost tračnega lista • Vodilo tračnega lista s karbidnim vodili in preciznimi ležaji • Zasučni žagin okvir od 0° do 60° • Primež za fiksiranje materiala • Neprekinjeno nastavljiv pomik • Samodejni izklop pogona tračnega lista po zaključku reza • Tehnična dokumentacija in navodila za uporabo • Izjava o skladnosti CE ## Glavne prednosti • Natančni kotni rezi od 0° do 60° • Stabilen žagin okvir iz visokokakovostne ulite konstrukcije • Dve hitrosti tračnega lista: 36 in 72 m/min • Natančno karbidno vodilo tračnega lista za dolgo življenjsko dobo • Samodejni hidravlični pomik • Integrirana hladilno-mazalna naprava za podaljšanje življenjske dobe tračnega lista • Visoka natančnost reza in odlična kakovost reza • Idealno za rezanje cevi, profilov, osi in polnega materiala ## Tehnični podatki • Tip stroja: horizontalni tračni žaga za kovino • Območje kotnega reza: 0°–60° • Dimenzije tračnega lista: 2455 × 27 × 0,9 mm • Hitrosti tračnega lista: 36 / 72 m/min • Hitrost pomika: 0–50 m/min (neprekinjeno nastavljiva) • Napetost tračnega lista: mehanska • Spuščanje žaginega okvirja: hidravlično, neprekinjeno nastavljivo • Višina baze primeža: 1010 mm • Moč motorja: 1,1 kW Crjdpfx Asyr Ndhofdjd • Napajanje: 400 V / 50 Hz / 3~ • Dimenzije stroja: 1950 × 750 × 1900 mm • Masa stroja: 230 kg ## Varnost Stroj je opremljen z zaščitnimi pokrovi za tračni list, varnostnimi stikali in samodejnim izklopom motorja. Pogon se avtomatsko izklopi po končanem rezu ali ob odprtju zaščitnega pokrova. Poleg tega se stroj ob prelomu tračnega lista samodejno izklopi. ## Tehnična podpora Nudimo strokovno tehnično svetovanje, garancijski in servisni servis ter pomoč pri izbiri ustreznih tračnih listov in optimalnih parametrov rezanja. Po želji organiziramo transport po Evropi in v svetu. Popolnoma nov stroj s 24-mesečno tovarniško garancijo, takoj pripravljen za uporabo.

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Crjdpfxjg U Uv Rs Afdod Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 1970, Premer reza 250 mm Dolžina tračne žage 3660 mm Širina reza 1,3 mm Obseg vpenjanja (dolžina) 450 mm Obseg vpenjanja (višina) 250 mm Hitrost rezanja 20 - 70 m/min Rezanje sila nastavljiva brezstopenjsko Poševni rezi - na obeh straneh 45° Napetost 380 V Frekvenca 50 Hz Pogonska moč 0,55 kW Teža stroja cca 0,7 t Potrebni prostor cca 1,5 x 1,0 x 1,6 m Crsdpfxjxc Nwus Afdsd Naprava za hlajenje,

Stanje: novo, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Article No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: - Horizontal vice - Length stop (600 mm) - Saw blade tension monitoring, electromechanical Csdpfx Aocuntzefdord - Chip removal brush - Coolant device - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 2017, – 2 hitrosti – Dvojni poševni rez Credpfx Ajzggd Hsfdsd – Hidravlično nastavljiv pritisk žage – Hitro vpenjalo – Hlajenje – Samodejni izklop – Nujna zaustavitev – 400V

Stanje: novo, Premer reza: 225 mm Dolžina tračnega lista: 2480 mm Največja širina reza: 245 x 150 mm Napetost: 230 V Moč pogona: 1,5 kW Dimenzije tračnega lista: 2480 x 27 x 0,9 mm Kot reza: 0 - 60° Hitrost reza: 20 - 90 m/min Teža stroja: cca 185 kg Potrebni prostor: cca 1,4 x 0,69 x 1,7 m NOVO CENA: 2.545,00 EUR + DDV - brezstopenjska regulacija hitrosti - brezstopenjski podajalnik - kotni rez - Bimetalni tračni list - materialni omejevalnik Crodpfey Ty Dpox Afdjd - podstavek stroja - sistem za hlajenje

Stanje: rabljeno, Leto izdelave: 2007, Rabljena polavtomatska tračna žaga MACC special 650di Kot reza od -60° do +60° Cedeyzadlepfx Afderd Dimenzije rezila: 5270 x 34 x 1.1 mm Digitalni prikazovalnik kota Kapaciteta reza pri 0° - okroglo 460mm - kvadrat 450x450mm - pravokotnik 620x450mm Teža stroja : 1250kg Stroj je v celoti servisiran.

Stanje: rabljeno, Način delovanja: polavtomatski Tip stroja: horizontalna tračna žaga Crsdpfx Aeydp Udsfdsd Rez: poševni rez Obseg poševnih rezov: -60° – 60° Pogon: 4 kW, 3×400 V/50 Hz Hitrost tračnega lista: 20 – 120 m/min. Dimenzije tračnega lista: 6.100×41×1,3 mm Višina nalaganja materiala: 770 mm Najkrajša ostanek dolžina: 40 mm Najmanjši premer reza: Ø 5 mm

Stanje: novo, Leto izdelave: 2026, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Cjdpji D Dgwefx Afderd Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting Parameters Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: novo, Stanje novo Dobavni rok cca. 10 tednov od naročila Država izvora Italija Cena 10.370 € Leasing obrok 199,1 € Žagalni okvir z vrtljivim okvirjem Dimenzije tračnega lista 3120 mm Hitrost lista 35/70 m/min Kapaciteta reza 0° okroglo 280 mm Kapaciteta reza 0° kvadratno 240 mm Kapaciteta reza 0° ploščato 350x140 mm Kapaciteta reza 45° okroglo 230 mm, kvadratno 200 Kapaciteta reza 60° okroglo 150 mm, kvadratno 130 Kapaciteta reza -45° okroglo 200 mm, kvadratno 170 Delovna višina 830 mm Dolžina 1550 mm Širina 1400 mm Višina 1750 mm Teža 420 kg Ročna vpenjalka s hitro vpenjalno ročico Spuščanje s lastno težo z nastavljivim dušilnikom 2 hitrosti Naprava za dovajanje hladilne tekočine Digitalni prikaz za mitralne reze Codjynmq Dspfx Afdsrd MOŽNOSTI: Transportni valji in tračni listi na povpraševanje

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Italija Cena: 11.070 € Leasing obrok: 212,54 € Žagin okvir: vrtljiv okvir Mere tračne žage: 3270x27x0,9 mm Hitrost tračnega lista: 35/70 m/min Kapaciteta reza 0° okroglo: 280 mm Kapaciteta reza 0° kvadratno: 240 mm Kapaciteta reza 0° ploščato: 420x200 mm Kapaciteta reza 45° okroglo: 260 mm, kvadratno: 240 mm Kapaciteta reza 60° okroglo: 170 mm, kvadratno: 160 mm Kapaciteta reza -45° okroglo: 200 mm, kvadratno: 180 mm Delovna višina: 830 mm Dolžina: 1600 mm Širina: 1400 mm Višina: 1800 mm Teža: 438 kg Ročna vpenjalna glava s hitro zateznim ročajem Spuščanje z lastno težo z nastavljivim dušilcem 2 hitrosti Crodpfeynmqwjx Afded Sistem za hlajenje MOŽNOSTI: Valjčne proge in tračne žage na zahtevo

Stanje: dober (rabljeno), Cutting range 90° round: 240 mm Crodpfjimqt Asx Afdsd Square approx.: 260 x 180 mm Saw band: Cutting speeds: Fixed vise: 310 x 110 mm Movable vise: 190 x 110 mm Opening: 270 mm Equipment: mobile Condition: good Connection: 1.1 kW Weight: 230 kg Dimensions: 1,400 x 800 x 1,300 mm

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Italija Cena 8680 € Leasing obrok 167,52 € Žagin okvir vrtljiv Dimenzije žaginega traku 3120x27x0,9 mm Hitrost traku 35/70 m/min Kapaciteta reza 0° okroglo 280 mm Kapaciteta reza 0° kvadratno 240 mm Kapaciteta reza 0° ploščato 370x140 mm Kapaciteta reza 45° okroglo 225 mm, kvadrat 215 mm Kapaciteta reza 60° okroglo 140 mm, kvadrat 140 mm Crsdswirpvspfx Afdsd Delovna višina 830 mm Dolžina 1550 mm Širina 1400 mm Višina 1900 mm Teža 353 kg Ročni primež s hitrim zapiralnim ročajem Spuščanje z lastno težo z nastavljivim dušilcem 2 hitrosti Naprava za hlajenje MOŽNOSTI: Valjčne proge in žagini trakovi na zahtevo

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Cjdpfx Afehpktvsdord Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 2.700 mm, širina tračne žage: 27 mm, Features: - Robust saw frame made of cast steel - Miter cuts 0° – 60° right and 0° – 45° left - Carbide-tipped saw band guides - Manual vise with quick-release lever - Adjustable vise - Mechanical band tensioning with electric band monitoring - Ergonomically arranged control elements Technical Data: Motor power 1.3 kW Band speed 35/70 m/min Vise clamping width 275 mm Band dimensions 2700x27x0.9 mm Electric coolant pump 0.06 kW Working height 990 mm Machine weight 424 kg Cedpfx Aevpuqksfdsrd Machine dimensions (WxDxH) 0.9x1.45x1.6 m Cutting Capacity: Round Square Rectangle 90° 240 mm 240x240 mm 310x200 mm 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm 45° L 150 mm 135x135 mm 145x125 mm