Tračna žaga

BFS Ecoline LZ 280 S

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Njdsvrcqdopfx Adyewb Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1996, Cutting diameter: 260 mm Saw band length: 2910 mm Cutting width: 0.9 mm Cutting capacity at 45° (round): 200 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 90° (flat): 300 x 260 mm Cutting capacity at 60° (round): 165 mm Cutting capacity at 60° (square): 150 x 150 mm Cutting capacity at 60° (flat): 160 x 120 mm Blade speed: 35 / 70 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Material support height: 950 mm Njdpfotqql Tex Adyswb Total power requirement: 2.0 kW Machine weight approx.: 400 kg Machine dimensions (L x W x H): 1.70 x 0.90 x 1.67 m Accessories: Coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 490 mm, izvrtina vretena: 155 mm, višina središča: 400 mm, stružna dolžina: 3.000 mm, največja hitrost vretena: 1.250 obr/min, hitrost vretena (min.): 6 obr/min, širina postelje: 700 mm, Premer struženja v izrezu: 1.050 mm, največja hitrost vrtenja: 1.250 obr/min, skupna masa: 7.500 kg, premer trikrake glave: 630 mm, Stružnica ZMM CU800x3000, letnik 2011, zelo malo rabljena, v izjemno lepem stanju Specifikacije: Premer struženja nad ležiščem: 890 mm Razdalja med konicami: 3000 mm Prehod glavnega vretena: 155 mm Širina ležišča: 700 mm Hitrost: 6,3-1250 obr/min Teža pribl.: 7.500 kg Skladno ARBO/CE Stroj je opremljen z: • Digitalni prikaz na 2 oseh • BISON trikraka glava 630 mm • BISON štirikraka neodvisna glava 800 mm • 2 x fiksna podpora z ležajnimi vodili • 1 x pomična podpora • Električno nastavljiva konična glava Njdpexyf Ecefx Adyswb • Nosilec rezil z 4 držali • Hladilni sistem • Osvetlitev stroja

Stanje: novo, Cutting Range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° right: 230 mm square 45° right: 220 x 220 mm flat 45° right: 230 x 150 mm round 60° right: 140 mm square 60° right: 140 x 140 mm round 45° left: 200 mm square 45° left: 175 x 175 mm flat 45° left: 220 x 150 mm Cutting Speed: 40 / 80 m/min Saw Blade: 2925 x 27 x 0.9 mm Working Height: 975 mm Coolant Pump: 100 W Saw Motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Ideal for cutting pipes, profile material, and solid stock made of stainless steel, iron, etc., for industrial/commercial use - Generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vise for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2925 x 27 x 0.9 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vise - Material stop - Coolant system with pump Nwsdpfx Aoiqt Rljdyjb - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Nwsdpfx Adeu Dbvtjyeb Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 25.000 h, Machining center Huroc BMC 64. No internal coolant supply (IKZ). Chip conveyor. Coolant tray. Spindle taper SK 40 DIN 69871. Nwodpfxop I Hanj Adysb

Leto izdelave: 2012, Stanje: delavnici obnovljeno (rabljeno), Konvencionalni precizni stružnica WEILER "CONDOR VC" S triosnim digitalnim prikazovalnikom Siemens Leto izdelave: 2012 Nsdpsxykz Asfx Adyowb Vrtina vretena: 56 mm Razdalja med konicama: 800 mm Maksimalni premer nad posteljo: 205 mm Območje vrtljajev: 30 – 3500 rpm Z naslednjo opremo: - Nosilec orodja Multifix - Zadnja zaščitna stena proti ostružkom z notranjo osvetlitvijo - Naprava za hlajenje - Tri-čeljustna vpenjalna glava Ø 200 mm - Zaščita vpenjalne glave - Sledilna luneta Ø cca 150 mm - Konjiček z izvlečnim vrtalnim pinolom - Navodila za uporabo

Stanje: novo, Leto izdelave: 2026, Optimum Optisaw SD 500 Nsdpegd Si Ejfx Adyowb Double Miter Metal Band Saw with Swiveling Saw Frame Item no. 3292380 Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° upright rectangle (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Cutting capacity round 0°: 150 mm Cutting capacity square 0°: 150 x 150 mm Cutting capacity flat 0°: 150 x 165 mm Cutting capacity round 45°: 115 mm Cutting capacity flat 45°: 115 x 130 mm Cutting capacity round 60°: 60 mm Cutting capacity flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw bow swivels up to 60° - Equipped with 2 blade speeds for optimal adjustment to the workpiece - Ideal for machining pipes, sectional steel, and solid materials made of stainless steel, iron, etc. - Generously dimensioned saw arm for vibration-free operation - Saw arm lowering via hydraulic downfeed cylinder - Low-noise operation thanks to robust construction - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Including base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 TPI Nodpfxjilk E Ds Adyewb - Quick-release vice - Material stop - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Stanje: rabljeno, Leto izdelave: 2020, Cutting diameter: 250 mm Saw band length: 3100 x 27 x 0.9 mm Cutting range at 90 degrees (square): 220 mm Cutting range at 90 degrees (flat): 280 x 190 mm Band speed: 37 / 74 m/min Saw motor: 1.5 kW Machine weight: approx. 0.5 t Space requirement: approx. 1.6 x 1.4 x 1.3 m Mitre band saw - Semi-automatic - Double mitre - Material detection during lowering Njdpfx Adjwkvq Hjyswb