Stroji za sestavljanje furnirja nakup rabljenega (36)

Stanje: dober (rabljeno),

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, lastna masa: 31 kg, For joining veneers with thicknesses of approx. 0.4 - 2 mm. The KUPER glue thread, applied in a zig-zag pattern by a heated thread guide, ensures a tight and secure joint. When pressing, the thread side is placed on the inside, eliminating the need for tedious sanding of the adhesive medium. An ideal machine with all the advantages of the KUPER zig-zag gluing machines. Key features: * Durable PUR coating Nodpfx Agsxdxh Ejxjla * Disc system with tolerance compensation for varying veneer thicknesses * Stainless steel worktable * Hard-chrome plated pressure roller * 8-step switch for regulating the heating power * Start/stop foot switch Technical data: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 - 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton packaging: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread, type K 12 10 threaders 103070 1 kg release agent 105661 1 set of tools, 1 operating manual Offer for glue thread available upon request! Item no. 0115034

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine works with a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need to sand off the adhesive medium. Specific features: * Torsion-free C-frame design made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machinery heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating power in stationary and running modes Nsdpfx Agoxdxcpoxela * Electrically controlled thread tear-off roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 920 mm Feed speed: approx. 20 m/min. Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz., 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread offer available upon request! Art.No. 0152300

Stanje: novo, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, For joining veneers with thicknesses ranging from approx. 0.3 to 3.0 mm. The machine operates with a special adhesive thread, which is applied in a zigzag line over the joint. High adhesion and tear resistance ensure tight joints, even with wavy veneers. During subsequent pressing, the adhesive thread is embedded inside, which eliminates the need for sanding off the adhesive material. Specific features: * Torsion-free C-frame construction made of steel * Stainless steel worktable * Standard heating system * SP control unit * Pneumatically regulated bonding pressure * Disc wheel system with tolerance compensation for varying veneer thicknesses Nodpjxdxccjfx Agxola * Adjustable heating output for both idle and operating modes * Tool-free adjustment of the pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed rate: 4-step, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 - 3.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool Original KUPER adhesive thread Type 1220 10 Threaders 103071 1 kg Release agent 105661 1 set of tools, 1 operation manual Adhesive thread available upon request! Art. No. 0149650

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, OUR BESTSELLER – 1,000 mm Throat Depth Splicing machine for gluing veneer strips including gluing unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted, and provided at a central location for analysis (optional). Additional modules for power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feed system with disc wheels and tolerance compensation mechanism for gap-free joining - Low-maintenance, energy-saving, and veneer-friendly Nsdsxdxktspfx Agxela high-performance plastic chains (excellent sliding properties, minimal heat conduction, no discoloration) - 12 mm narrow, chrome-plated heating rails ensure minimal veneer stress due to shrinkage and significantly reduced energy requirements - Intelligent, automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Frame throat depth: 1,000 mm Veneer thickness: approx. 0.35 - 2.5 mm, optionally from approx. 0.25 mm optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: infinitely variable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar * Subject to material tests, depending on wood type and micro and/or thick veneer package (option) only without micro and thick veneer package (option) ADHESIVES Suitable for urea resin adhesive Adhesive offer on request! Art. No. 0164700

Stanje: zelo dobro (rabljeno), Veneer splicing machine Njdpstq Ey Tjfx Agxela Model: KUPER FWJ 920 In very good condition.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle EM-28 rob za ojačanje i obrezivanje rubova edgemaster, godina proizvodnje 2006, na prodaju! Dužina furnirske trake: 420 - 2800 mm Širina furnirske ploče (poprečna vlakna): 400 - 4200 mm Debljina furnirske trake (uključujući obrezivanje): 0,3 - 1,5 mm Debljina furnirske trake: 0,3 - 2,0 mm Brzina proizvodnje (kontinuirana): 15 - 35 m/min Odrezivanje sa svake strane: 10 - 350 mm Širina trake (papira): 6 mm Debljina trake (papira): 0,16 mm, tip CP-99 Kolut (unutarnji i vanjski promjer jezgre): ∅ 75 mm, ∅ 325 mm Širina koluta: 65 mm Duljina trake na kolutu: 3200 m Nljdpfjumrgajx Agxja Električna energija: 1,1 kW Komprimirani zrak: 6 bar Potrošnja komprimiranog zraka: 5 NL/min

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete plywood panel production line including: - 1 BUERKLE composing line (year 1991) with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal strand conveyor + 1 OLM cross strand conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with thermic oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm - Opening between platens: 75 mm - 1 central hydraulic cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side ejection pushers on a lift table. Line currently in operation, available second half of 2025. Nedpfx Aeul Uizegxjla

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle FZR-24 križni lepilni stroj za furnir, letnik 2013, na prodaj! Nlsdpfx Ageumrf Aexja Dolžina furnirskih trakov: 400–1100 mm (dva pasova) / 350–2100 mm (en pas) Širina furnirskih trakov: 50–500 mm Debelina furnirskih trakov: 0,3–1,5 mm Največja nazivna zmogljivost / cikel stroja: 30 ciklov/min Povprečna proizvodna hitrost: 17–20 ciklov/min Efektivna dolžina ogrevalne cone: 2478 mm Priključna moč: 22 kW Stisnjen zrak: 6 bar Vrste lepila: na osnovi PVAc ali UREA

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 1995, stanje: dober (rabljeno), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of Manufacture: 1995 S/N 3508 3179 Key Features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width for the glue thread cutting unit Nodpfx Aehbp Ifjgxola Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot-air heating Compressed air generation Discus for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m