Naprave za čiščenje strojev in delov nakup rabljenega (116)

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure can be adjusted from 1 to 80 bar. Technical Data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1 to 80 bar Pgedof A Nq Aepfx Andon Tank volume: 75 liters / heating power: 2 kW Standard features: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel plates above the tank • Upwards-opening lid with two hand access ports and gloves • Toughened glass viewing window • Door opening/closing system with gas spring assistance • Door position monitored via safety limit switch • Pump intake filter (500 micron) • Foot switch for operating the cleaning pump • Interior lighting • 600 mm neoprene gloves (chemical resistant) • Height-adjustable feet (+/- 50 mm) Optional: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Manual cleaning is carried out using special gloves in the front section. The cleaning effectiveness is ensured by a washing pump (0–8 BAR) and a special spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 0 to 8 bar. Technical Data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: adjustable 0–8 bar Tank volume: 75 litres / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel plates above the tank • Upward-opening lid with two access ports and gloves • Tempered glass viewing window • Door opening/closing system supported by gas struts Psdpfx Ajr Hm R Tendsgn • Door opening monitoring via safety limit switch • Filter on the pump intake side (500 micron) • Foot switch for operating the cleaning pump • Interior lighting • 600 mm neoprene gloves (chemical resistant) • Adjustable feet (+/- 50 mm) • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Electronically controlled basket drive - Level control - Lid lock - Removable filter plate Pgjdof A Nquopfx Andon - Weekly timer function Oil skimmer, version WE AM version for additional manual cleaning - Lid with viewing window, lighting, and gauntlet gloves - Low-pressure pump 3–6 bar with brush washing system and hand-held spray gun - Blow-off gun for compressed air High-pressure unit 160 bar for AM version, permanently installed on machine side

Leto izdelave: 2025, stanje: novo, DOLFİN-VDL-Serie Trommel-(Spiral-)Teilereinigungsmaschinen werden insbesondere zum Reinigen von Kleinteilen eingesetzt, die in großen Mengen und als Schüttgut hergestellt werden. Das von der Einlaufseite der Spiraltrommel eingefüllte Material wird durch die im Inneren befindlichen Spiralen zur Auslaufseite der Trommel transportiert. Während sich die Trommel entsprechend der eingestellten Drehzahl um ihre eigene Achse dreht, durchlaufen die Teile nacheinander Wasch-/Entfettungs-, Spül-, Passivierungs- und Trocknungsprozesse (je nach Modell). Da diese Prozesse fortlaufend und sequentiell erfolgen, werden sämtliche Reinigungsabläufe schnell und effektiv in einem einzigen Gerät abgeschlossen. Durch druckbeaufschlagtes Sprühen und Tauchen in jedem Abschnitt wird eine vollständige Krafteinwirkung auf alle Oberflächen gewährleistet. Dieses Modell eignet sich besonders zum Reinigen von Schrauben, Muttern, Unterlegscheiben oder ähnlichen Kleinteilen, Fittings, Nippeln, Kupplungen und Verbindungsstücken, die in CNC- und automatisierten Maschinen in hoher Stückzahl gefertigt werden. Pgedov S Dk Sepfx Andon Unabhängig vom Materialtyp der zu reinigenden Bauteile ist das Gerät vollumfänglich kompatibel mit Stahl, Messing, Aluminium, Kupfer und Edelstahl. Da Dolfin Teilereinigungsmaschinen in einem geschlossenen Kreislauf arbeiten, werden weder Frischwasser noch neues Reinigungsmittel bei jedem Waschvorgang benötigt. Mehrere Waschgänge können mit demselben Tank durchgeführt werden; der anfallende Schmutz verbleibt vollständig in der Wascheinheit. Diese Eigenschaft schützt sowohl die Umwelt als auch Ihre Mitarbeitenden. Dank hoher Effizienz und Reinigungsleistung werden Energie-, Wasser- und Personalkosten reduziert. Das Gerät arbeitet fortlaufend gemäß den zuvor über das Bedienpanel eingegebenen Reinigungsparametern. Die in der Produktion anfallenden Massenteile können auf drei verschiedene Arten in die Anlage geladen werden: 1. Mit Vibrations-Einfüllbehälter, 2. Mit Hubförderer, 3. Durch Anbindung an das bestehende System des Kunden. Für weitere Informationen stehen wir Ihnen gerne zur Verfügung. Profitieren Sie von über 40 Jahren Erfahrung! Wir produzieren für Sie und exportieren mit Qualität und Vertrauen in mehr als 30 Länder.

Leto izdelave: 2025, stanje: novo, Die Teilewaschmaschinen der DOLFIN-KBN2-Serie werden zum Reinigen von Bauteilen eingesetzt, die oft größer und schwerer sind und nach dem Waschen zusätzlich gespült, passiviert oder einem weiteren Prozess unterzogen werden müssen. Vor der Montage oder Verpackung in Unternehmen und Fabriken mit Serienfertigung ist eine ölfreie und saubere Oberfläche unerlässlich. Zudem kann es, abhängig vom Einsatzbereich des Bauteils, notwendig sein, das im ersten Schritt verwendete Reinigungsmedium wieder vollständig von der Oberfläche zu entfernen. Daher ist im zweiten Schritt eine Spülung oder ein ähnliches Verfahren zwingend erforderlich. Unsere KBN2-Serie beinhaltet spezielle Teilewaschautomaten mit mehreren Tanks und/oder Bädern. Die eingelegten Bauteile werden im Reinigungskorb um die eigene Achse gedreht, während heißes Wasser mit Reinigungsmittel unter Druck aufgesprüht wird. Durch Druck, Temperatur und chemische Wirkung werden sämtliche Öle und Verunreinigungen gründlich entfernt. Nach dem Waschen und der Rückführung des Reinigungsmittels in den eigenen Tank beginnt der Spülvorgang im zweiten Tank. Pedpfx Asv S Dihsndogn Optional kann ein dritter Tank integriert werden, wodurch eine weitere Funktion nach der Spülung möglich ist. Da Dolfin-Teilewaschmaschinen in einem geschlossenen Kreislauf arbeiten, werden nicht jedes Mal Frischwasser und neues Reinigungsmittel zugeführt. Es kann mehrfach mit demselben Tank gewaschen werden, wobei sämtliche Verschmutzungen in der Waschzelle zurückbleiben. Dieses System schont sowohl die Umwelt als auch die Mitarbeitenden und sorgt dank hoher Effizienz und Performance für Einsparungen bei Energie, Wasser und Arbeitszeit. Die Anlage führt den gesamten Waschvorgang automatisch entsprechend der vorab am Bedienpanel eingegebenen Parameter durch. Alle Prozessschritte erfolgen über speziell programmierte PLC-Steuerungen. Für das einfache Be- und Entladen, insbesondere schwerer Bauteile, kann der Waschkorb bei Bedarf auf einen Transportwagen gesetzt und so komfortabel im Betrieb bewegt werden. Vertrauen Sie auf über 40 Jahre Erfahrung! Wir exportieren weltweit in über 30 Länder – mit Qualität und Zuverlässigkeit.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 24 h, Funkcionalnost: popolnoma funkcionalen, Serija DOLFİN-PYM2 naprav za pranje delov so industrijske naprave za čiščenje delov, ki se uporabljajo pred in po reviziji, zlasti v servisih za popravila in vzdrževanje. Psdpfxev Sa I Tj Andegn Deli, ki so nameščeni v napravo, se vrtijo okoli lastne osi s pomočjo košare za pranje, medtem ko se pod pritiskom razpršuje vroča voda z detergentom. S kombinacijo pritiska, temperature in kemičnega učinka se z dela odstranijo vse maščobe in nečistoče. Ker pralni stroji Dolfin delujejo v zaprti zanki, se pri vsakem pranju ne uporablja nova voda ali detergent. Isto posodo za več ciklov uporablja ista tekočina, pri čemer vsi ostanki umazanije ostanejo v pralnem prostoru. Ta lastnost ščiti okolje in zaposlene. Zaradi visoke učinkovitosti in zmogljivosti prihrani energijo, vodo in delo. Deluje avtomatsko v skladu z vnaprej nastavljenimi temperaturnimi in časovnimi vrednostmi. Za nalaganje, predvsem težjih predmetov v košaro oziroma njihovo odstranjevanje iz košare, se košara lahko postavi na transportni voziček, kar pomeni, da jo je mogoče po potrebi odstraniti iz naprave. S pomočjo vozička jo je mogoče enostavno prenesti na katerikoli del delavnice.

Leto izdelave: 2025, stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW Pedpfx Ansgd Uifedjgn OPREMA: 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Steam cleaner, stainless steel 230 V 3.5 kW 4-meter steam hose Pgjdpfxjtp Nwyj Andsn 180°C 8 bar Available immediately

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), -Usable internal dimensions: D=970mm H=540mm (other sizes available on request) -Touch screen -Spray pressure: 3 bar -Basket load capacity: 200kg -Tank volume: 210L -Standard equipment: • Oil skimmer • Frame, lid and housing made of stainless steel • Electrically operated, timer-controlled steam extraction • Reinforced stainless steel basket Pgjdpfsf A Nq Ujx Andsn • Stainless steel electric pump • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor • Electrical system IP 65, PLC control (DGT V4) • Automatic water inlet • Safety limit switch monitors lid opening • Stainless steel spray nozzles • Weekly timer for heating and oil separator • Hour meter

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), IMMEDIATE AVAILABILITY!!!! Manual cleaning is carried out using specialized gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a specialized spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 1 to 80 bar. Technical specifications: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1–80 bar Tank capacity: 75 liters / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Top-opening lid with two hand openings and gloves • Hardened glass viewing window • Door opening/closing system assisted by gas springs • Door opening monitored by safety limit switch • Filter on the suction side of the pump (500 micron) • Foot switch for operating the cleaning pump Podpfx Aof A D Nmondjgn • Internal lighting • 600 mm neoprene gloves (chemical resistant) • Height-adjustable feet +/- 50 mm Options: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 500 kg, Cleaning system type W150 Basket diameter: 1,500 mm Usable internal height: 950 mm Basket load capacity: 500 kg Suitable for paint preparation and final cleaning with KS Complete stainless steel construction with: - Stainless steel pump with frequency control - Integration of conductivity probe into PLC - Automatic level replenishment - Electric bath heating (indirect) - 2-tank system - Eco-rinse - Three-dimensional impulse air blow-off - Bag filter system - Siemens S7-300 PLC control system with operator panel - Direct drive for the washing basket - Steam extraction/condensate removal - Level control - Chip/particle filter with bath cover plate Pgodpfx Asga Dqljnden - Impulse compressed air blow-off including soundproof hood - Oil separator PPT 100 - Discharge device/floor rinsing with draw-off valve - 2 trolley/transport systems

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), IMMEDIATE AVAILABILITY! Manual cleaning is performed using special gloves at the front section. The efficiency of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. A cleaning fluid temperature of up to 60°C can be set in these units. The pressure can be adjusted between 1 and 80 bar. Technical Data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optional up to 150 kg) Spray pressure: 1–80 bar adjustable Tank volume: 75 liters / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber Pgsdpfxsf A Nqqe Andsn • Frame, legs, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Upward-opening lid with 2 handholes and gloves • Hardened glass viewing window • Door opening/closing system assisted by gas struts • Door position monitored by safety limit switch • Inlet-side pump filter (500 micron) • Foot switch for operating the cleaning pump • Interior lighting • 600 mm long neoprene gloves (chemical resistant) • Height-adjustable feet +/- 50 mm • External mini pneumatic oil separator

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and washing basket made of stainless steel Combination machine – rotating table system with removable tilting device and small parts basket - Basket diameter (rotating table washing basket): 600 mm - Usable internal height: 370 mm - Basket load capacity (rotating table washing basket): 100 kg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm - Mesh size: 12 mm - Basket load capacity (small parts basket): 20 kg Full stainless steel construction Pump(s) and external piping/fittings version Suitable for operation with liquids with a density of 1.3, Pgodpfx Anjq Ewgksden featuring a reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO rinse (minimized rinse loss) for minimal water consumption Water supply from operator's mains with machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Discharge device/floor flushing with pump and piping system in stainless steel

Stanje: pripravljen za uporabo (rabljen), Foresite C3 / C.I. Critical Cleanliness Control Tester, Analytical Technology Year of manufacture: 2011 The C3 is unique among electronic cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA is clean. Simply select the components and/or circuit areas that are most sensitive and susceptible to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback on whether potentially detrimental residues, often caused by manufacturing processes, are present. Once critical areas for testing have been identified, the operator simply inserts a new disposable test cell into the steam head and manually moves the head on the articulated arm over the test area. The weight of the arm and steam head seals the test cell against the test surface. The operator then starts the automated test sequence. Within 7-10 minutes, the operator will know whether the tested area of the product is clean. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area by steam, can be further analyzed to identify specific contaminants and their concentrations. The entire test is straightforward for the operator, with results that are not operator-dependent. The use of Pro-Site single-use test cells and extraction solutions prevents cross-contamination of the sample. You are welcome to arrange an inspection. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers as well. Psdpfxoxhcklj Andsgn Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data deviations and errors in the article description are possible and subject to change.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.100 mm, skupna širina: 1.300 mm, skupna višina: 1.600 mm, vhodna napetost: 380 V, nosilnost: 500 kg, lastna masa: 550 kg, Oprema: dokumentacija / priročnik, Komorna pralna naprava z vrtljivim rešetom. Največja teža obdelovanca 500 kg, velikost košare 74x74 cm, največja višina obdelovanca 66 cm. Vključuje voz za nalaganje in čistilni prašek. Navodila za uporabo so na voljo. Podpfx Aoymggvondogn

Leto izdelave: 2023, obratovalne ure: 473 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, nosilnost: 150 kg, dolžina obdelovanca (maks.): 480 mm, širina obdelovanca (maks.): 670 mm, višina obdelovanca (maks.): 300 mm, številka stroja/vozila: 500022, TECHNICAL DETAILS Basket dimensions: 670 mm x 480 mm x 300 mm Maximum load weight: 150 kg Loading height: 850 mm Cleaning Ultrasonic frequency: 25 kHz or 75 kHz Cleaning programs: 20 individually configurable Mechanism Type and speed of rotary motion: Freely adjustable Media Circuits Circuit 1: Spray cleaning, flood cleaning, pressure-flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 2: Spray cleaning, flood cleaning, suction-flood cleaning, ultrasonic cleaning Circuit 3: Spray cleaning, flood cleaning, scoop-flood cleaning, ultrasonic cleaning Drying: Compressed air impulse, hot air drying, hot air drying with humidity sensor, vacuum drying Tank 1 Delivery rate: 350 L/min Pump pressure: 3.5 bar Pump connection power: 5.5 kW Tank volume: 450 liters Tank 2 & 3 Delivery rate: 380 L/min Pump pressure: 2.5 bar Pump connection power: 3 kW Tank volume: 350 liters MACHINE DETAILS System weight: 2,400 kg Dimensions: 3,100 mm x 2,200 mm x 2,200 mm Process chamber and tanks: Stainless steel Pgedoxamhlepfx Anden Electric tank heating: Temperature freely selectable Control system: SIMATIC F-CPU Operating hours: 473 h EQUIPMENT - Bypass filtration for all baths - Compressed air impulses - Spray device

Stanje: zelo dobro (rabljeno), VE-cirkulacijski sistem za vodo za pripravo izpiralnih kopeli Pgedpfx Anexvllnedon

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Optimal for degreasing and, if required, preservation Automatic loading – basket rotation Vacuum drying Batch dimensions: 530 x 320 x 200 Pjdpfxowzkubs Andegn You can find further systems on our website under Used Equipment

Leto izdelave: 2019, obratovalne ure: 69 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Spray cleaning system with basket rotation Psdpfjwzkq Nsx Andsgn Batch dimensions: 400 x 600 x 280 mm You can find more systems on our homepage under 'Used Equipment'.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Hydro Power 1200 is a professional high-pressure washer made from high-quality stainless steel with a wide range of applications. The washer is ideal for turbocharger regeneration and cleaning heavily contaminated parts made of steel, cast iron, aluminum, and other alloys. The cleaning process is performed in a closed loop using MRS Cleaner Ultra Active washing fluid, heated up to 45 °C. The MRS Cleaner Ultra Active agent is sprayed from the gun nozzle at a pressure of up to 140 Bar, ensuring thorough cleaning of hard-to-reach areas and heavily soiled parts from carbon deposits, grease, or oil. Both the temperature and the detergent increase the washing efficiency. The washer is equipped with two filters and adjustable feet for height regulation up to 20 cm. The washer lid is fitted with pneumatic actuators for increased safety and operating comfort. During washing, you can also use the integrated through-flow brush or the compressed air gun. Cleaning nozzles are mounted on the inspection window for visibility during operation. Additional features: * Thermally insulated tank – effectively protects the heated fluid inside from fast cooling. * Cleaning nozzles for the viewing window * Height-adjustable feet * Oil separator – extends the fluid’s lifespan Optional accessories: - Rigid lance - Rotary table Technical specifications: Overall width: 1410 mm Overall depth: 800 mm Height min/max (closed): 1720/1920 mm Height min/max (open): 2380/2580 mm Working width: 1100 mm Working depth: 700 mm Working height: 620 mm Weight: 200 kg Working table load capacity: 200 kg Working fluid capacity: 120–150 L Pgedpfx Anexnl Efjden Temperature adjustment: 0–45 ℃ Lance output: up to 12 l/min Pressure: 140 Bar Voltage: 3~400 V Foot switch WE ALSO OFFER OTHER HYDRO POWER HIGH-PRESSURE WASHER MODELS IN THE SIZES 800, 1200, 1600, AND 2000. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Basket Wash Machine MRS - WASH 1200 Application: Device designed for washing components of various sizes and weights. The washer features a mechanically driven rotating basket powered by an electric motor and spray nozzles. Operating Description: After switching on the device using the main switch, the bath begins heating. Once the set temperature is reached, the washing cycle can be initiated. The first stage is the main wash, and its duration can be continuously adjusted with a timer switch located in the control box. After the set time has elapsed, the washing process ends automatically. STANDARD EQUIPMENT OF THE WASHER: * Lid interlock sensor, which disengages the closing mechanism when the lid is opened during the washing process * Liquid level sensor in the tank, protecting against dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration * Coarse dirt filter for insoluble contaminants (1 mm mesh filter) * Drain valve Pgsdpfexnlpdsx Andsn Technical Data: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Work time programming: 0–99 min Washing temperature: 60°C Heater power: 12 kW Tank capacity: 400 L Spray flow rate: 200 L/min Spray operating pressure: 4.5 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400 V OUR OFFER ALSO INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS MRS WASH IN SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 1.750 mm, skupna dolžina: 1.750 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Automatic Basket Washer HYDRO WASH 1200 2-in-1 is a multifunctional device designed for fully automatic washing of parts in a motor-driven rotating basket or, for more complex-shaped components, high-pressure washing at 140 bar. This combination of processes ensures that the device is suitable for use in any workshop. It is ideal for companies specializing in the regeneration of turbochargers, steering gears, or gearboxes, significantly improving workflow efficiency. To guarantee user safety and maintain optimal washing parameters, the washer is equipped with an electronic control panel and a set of cooperating sensors. Operating principle: Before first use, fill the tank with washing liquid. The recommended cleaning solution is a mixture of MRS Cleaner Strong concentrate and water in the appropriate ratio. The Hydro Wash washer enables both manual and automatic washing. a) For automatic washing, prepare the unit (fill with water and concentrate), close the glovebox cover, close the lid by pressing and holding the two buttons (front and rear of the unit simultaneously), then press the start button. *Basket rotation is possible with the lid open. This is done by pressing the right button on the foot pedal or simultaneously pressing both buttons (front and rear of the unit), providing the glovebox cover is closed. b) For manual washing, close the lid by pressing and holding both buttons (front and rear simultaneously). Open the glovebox cover and press the left button on the foot pedal. STANDARD EQUIPMENT INCLUDES: - Lid-release sensor for opening during the washing process - Liquid level sensor in the tank (dry-run protection) - Liquid temperature sensor - Adjustable spray arms with high-quality stainless steel nozzles from Spraying System - Mechanically driven rotating basket Pedexm Ullepfx Andogn - 140 bar high-pressure pump - Compressed air gun - Pressure regulator with air/water separator - Coarse insoluble contaminant filter (0.8mm mesh filter) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic actuators Technical Specifications: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Programmable operation time: 0-99 min Washing temperature: 60℃ Heater power: 12 kW Tank capacity: 400 l Spray output: 200 l/min Spray operating pressure: 4.5-6 bar Manual washing pressure: 140 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height: 1700 mm (2450 mm with lid open) Power supply: 3~400V Optional extras: - Belt oil separator - Set of low-pressure lances - Reinforced pump WE ALSO OFFER HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. MODELS 800 AND 1000 AVAILABLE. CONTACT US FOR DETAILS ON OTHER MODELS.

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), 2-Station Spray Cleaning System: - Lightly used - Sale due to production restructuring - Stations 1 and 2: Spray cleaning - Automatic transport - Two independent tanks - Tank 1 equipped with oil separator - Temperature up to 80°C - Automatic cycle with 4 program blocks - Automatic water management Transport Cart: 1,600 x 850 x 395 mm (L x W x H) Pedpfokqxtzjx Andjgn Usable dimensions: 1,530 x 830 x 800 mm (L x W x H) Dimensions: Total washing system (machine with loading and unloading stations) 13,800 x 2,000 x 2,420 mm (3,525 mm) (L x W x H / H with superstructure) Loading module 5,000 x 850 (1,140) x 700 mm (L x W x H / W with sensor) Unloading module 5,000 x 850 x 700 mm (L x W x H) Tank frame 2,200 x 1,300 x 1,300 mm (L x W x H) Electrical connection: 3 x 400 V, N, PE – 50 Hz – 100 A – 65 kVA

Stanje: rabljeno, Well-functioning vacuum pump Pedpfov Suuusx Andsgn Optionally available as a complete setup including water tanks, hydraulic tank, high-pressure pump, high-pressure hose reel, compressor, etc.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Na voljo je čistilna in razmaščevalna naprava z ventilatorjem za odvod pare in oljnim izločevalnikom, leto izdelave 1996, vrtljiva košara: Ø720 mm, notranja višina: 140 mm, največja uporabna višina obdelovanca: 450 mm, največja teža serije: 500 kg. Leta 2011 generalno obnovljena: zamenjan gonilni motor, grelnik, plinska vzmet in grelni elementi. Dokumentacija: navodila za uporabo, tehnična dokumentacija in izjava o skladnosti CE so na voljo. Zunanje dimenzije (D/Š/V): 1190 mm/1170 mm/1170 mm, teža: pribl. 290 kg. Ogled možen po dogovoru. Pgjdpfox Ect Ijx Andsn