Sistem CIP

Holstein und Kappert

Stanje: rabljeno, Leto izdelave: 2010, PARAMIX plant for the production of high- and low-carbonated beverages. The technical process steps are: degassing of water, dosing and mixing of water and syrup, carbonating the finished mixture. Retrofitting in 2009 by FAMIX: - CO2 impregnation unit - CO2 pressure-temperature ratio controller, type BMS7. The controller, including control cabinet, will be completely renewed again upon purchase of the equipment. Fedpfx Asxbn Hrobvopd Machine (addition): Paramix plant with carbonation unit; 2010 (overhauled and renewed) Capacity approx.: 150 hl/h mixing and carbonation Length: 2.9 m Width: 2.5 m Height: 2.5 m Operation / control: semi-automatic mixing system with control panel, CO2 controller with S7 control, including operator panel for pressure and temperature display Material: stainless steel Mounting / position: on frame Features: 2 pressure vessels (product and vacuum) each 8.3 hl / 8 bar, CO2 pressure-temperature ratio controller (FAMIX BMS7), carbonation unit (FAMIX) with 13,000 l/h capacity, PT 100, pressure sensor, safety valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing tanks with swing segments and one agitator each (Ahlborn, approx. 15 hl per tank) Weight: 3000 kg

Stanje: rabljeno, Leto izdelave: 2019, Overview This semi-automatic Bag-in-Box filler was manufactured by Cartobol in Spain in 2019. The machine is being sold because the owner has purchased a more modern model to improve production. It is immediately available. Technical Data Capacity: Up to 600 bags/h (3L) 510 bags/h (5L) 390 bags/h (10L) 360 bags/h (15L) 300 bags/h (20L) Formats: 3L - 20L Bag-in-Box (single and network bags) Dimensions: 0.73m x 0.93m x 1.85m Weight: 156 kg Pressure: Min. 6 bar Voltage: 220V Current: 6 A Design: Stainless steel frame and rollers, mobile on castors Filling system: High-precision electromagnetic flowmeter Pump: Stainless steel centrifugal pump (8,000 L/h) Control: PLC with 7" touchscreen Features: Automatic CIP cleaning system Optimized filling with load cells Quick format change Low air content in the bags Fpsdswi Txlspfx Abvsd

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Two identical Göztepe belt fryers for vegetables (onions, potatoes, nuts, etc.) are available. Working length: 6,800 mm, working width: 700 mm, infeed height: 1,280 mm, discharge height: 1,060 mm, operating temperature: 180°C. Lower plastic belt length/width: 14,000 mm/720 mm, upper plastic belt length/width: 8,500 mm/720 mm. Machine dimensions (L/W/H): approx. 6,900 mm/1,800 mm/3,500 mm. Total power: 135 kW. Documentation available. Inspection on site is possible. Fpedpsu Tiy Nsfx Abved

Stanje: rabljeno, Leto izdelave: 2013, Overview Fpodpfxsukafre Abvjd The Heuft InLine IR – High-Speed Empty Bottle Inspector is distinguished by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/hour). It can perform all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, outfeed inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was refurbished and installed with modifications, including a conveyor control system. Technical Data: - Capacity: 5,000 – 50,000 bottles/hour - Compact installation dimensions - Completely refurbished and modified in 2016 Features: - Performs all standard inspections: sidewall, infeed, finish, base, outfeed, HF caustic and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Stanje: novo, Leto izdelave: 2025, Sleeve wrapper/film banderoling machine for packaging large products. Includes shrink tunnel. Fully automatic product feed, automatic transport into the tunnel, and discharge. - Specifications: Power supply: 380V, 21.0kW; Compressed air: 0.6m³, 6.0Bar; max. machine cycle rate (unloaded): 10 cycles/minute; max. product dimensions (mm): W750 x H300, machine dimensions (mm): L5060 x W1150 x H2000; weight (net/gross): 1200/1400kg. Fjdpfx Aev Nl N Dsbvepd Please note that our new prices are often below typical used prices. Feel free to contact us and let us know your packaging application. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: rabljeno, Leto izdelave: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition, and is ready for immediate use. Technical Details Capacity: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft HLAN, including gateway Licensing: 5 type licenses Features: Software assistants for troubleshooting and package changeover Availability: Ready for immediate use Missing Components Thread blow-off (must be retrofitted if required) Controls Monitoring of incoming bottle stream (optional) Output of stop signal for faulty bottle dimensions Inspection of bottle base, sealing surface at the mouth, and thread Inspection of internal and external side wall Detection of conductive liquids (e.g. caustic), and residual liquids (oils, paints) using IR technology Ejection of defective containers or output of an ejection signal Scope of Delivery Spectrum TX conveyor control Measuring bridges for infeed control and ejection with height adjustment 2 x Delta K ejector Air conditioning unit Various spare parts (discs, belts) Documentation and training materials (German) Transponder for test bottles Fpsdpfx Absu Scr Sjved

Stanje: rabljeno, Leto izdelave: 2014, 2-posodna CIP-naprava za vroče čiščenje v avtomatskem režimu, sestavljena iz: - 2 čistilni posodi - povratna CIP črpalka Stroj (dodatno): 2-posodna CIP-naprava za vroče, izgubljeno čiščenje Volumen posode: vsaka po 1400 l Dolžina: 5412 mm Širina: 1550 mm Fedpfxexbpbwe Abvspd Višina: 2928 mm Oprema: 2 x čistilna posoda (ena izmed njih izolirana in oblečena na plašču), doziranje lugov in kislin, cevni toplotni izmenjevalnik z armaturami, pnevmatske lopute, vzorčevalnik, meritev vsebine, PT100, meritev prevodnosti in pretoka

Stanje: rabljeno, Stoječi CIP rezervoarji Stroj (dodatno): stoječi rezervoarji iz nerjavnega jekla na osnovnem okvirju Prostornina pribl.: 600 l na rezervoar Fjdpfx Aew Tal Sjbvopd Dolžina: 3800 mm Širina: 750 mm Višina: 2200 mm Material: nerjavno jeklo Osnovna konstrukcija: stoječi rezervoarji s kvadratnimi cevmi na osnovnem okvirju Oprema: zgornji človekov vstop, pršilna krogla, držalo za lestev, izstopna stran cevno povezana, črpalka, električna omarica

Stanje: rabljeno, Leto izdelave: 2008, Overview This stretch blow molding machine was manufactured in 2008 by the Italian company KOSME (Krones Group). The machine is in good working condition and will remain in production until the end of November 2025. After that, it will be dismantled and craned out through the roof. Fpjdpfoyb Tbiex Abved Technical Data Output: 10,200 bottles per hour Operating hours: approx. 50,000 h Formats: Neck finish: 29/21 (can be changed to 1881 or others) Preforms used: R-PET from Plastipak & Resilux Number of cavities: 6 (molds not included) Equipment & Features: - Quick-change system for shell molds - Kosme linear oven with 8 heating modules - Kosme preform tipper with conveyor system - Kosme preform feed rail - Kosme control cabinet - Kosme Danfoss VLT drive - Kosme touchscreen operator panel - Spare parts kit (list available upon request) Maintenance History: - Kosme FBA maintenance - Complete Kosme maintenance in October 2024 - Ongoing maintenance by in-house technicians Scope of delivery - KOSME KSB 6R blow molder - Preform tipper with conveyor system - Preform feed rail - Control cabinet - Drive and operator panel - List of spare parts (upon request)

Stanje: novo, Leto izdelave: 2025, Shrink tunnel for shrinking labels onto bottles, jars, and containers. Uniform shrinkage without wrinkling thanks to the steam process. – Tunnel specifications: max. product size: Ø 100xH220mm; max. output: 166 containers/minute; power supply: 220V, 900W; compressed air: 1bar; machine dimensions: L2450×W500×H1600mm; weight: 120kg. – Steam generator specifications: capacity and steam output: 27l, max. 34.4kg/h; generates temperature for steam shrinkage: 170°C; compressed air: 7bar; power supply: 380V; dimensions: 660x420x1230mm; weight: 120kg. Fjdpjv Nlx Ssfx Abvjpd Please note that our new machine prices are often lower than standard used machine prices. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.