Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 Fodpfxjwxvdce Aazogk O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: rabljeno, Leto izdelave: 2008, IDM Level HD is an industrial single-sided edge banding center designed for processing edges in standard furniture production. The HD model belongs to machines with a more robust construction and is suitable where stable edge banding quality is required at higher feed speeds. This machine allows for complete processing of a panel in a single through-feed operation – from pre-milling and glue application to final edge finishing. Thanks to the modular arrangement of the working units, the machine can process ABS / PVC edges as well as veneer. The machine is used, thoroughly cleaned, checked, and ready for installation. Machine Technical Features: - Pre-milling unit – 2 counter-rotating motors for flattening the incoming edge before edging - Glue application unit – EVA glue pot, electronic temperature control - Pressure zone – main pressure roller + subsequent pressure rollers - End trimming saws – 2 motors for clean trimming of edge ends - Top and bottom milling units – contour following, precise trimming of ABS/PVC edge - Front corner rounding unit – radius corner processing of panel - Rear corner rounding unit – finishing of corners on panel exit - Radius scrapers – final smoothing of edge radii - Flat scrapers – finishing equalization of the edge surface - Buffing unit – 2 discs for final edge polishing - Complete extraction system – connections for all working units - Pneumatic presses and adjustments – workpiece stability and precise regulation - Manual fine adjustment – digital readout wheels and micromovements for precise setting Fsdpfxexztmde Aazogk

Stanje: rabljeno, številka stroja/vozila: 008250, Pozicija 1: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0 Fjdpfx Asx Dipmeazogk Pozicija 2: Transfer BIESSE-STREAM B1 9.0 Pozicija 3: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 8 kg Total Power Requirement: 0.9 kW Fgjdev A E Iyjpfx Aazek Edge Banding Machine PM5000 With the portable edge banding machine PM5000 from WEGOMA-VIRUTEX, any workpiece can be effortlessly and easily edge-banded. Suitable for PVC, ABS, melamine, laminate or veneer tapes, which are pre-cut to the required length. Processing of straight, rounded or shaped panels is possible. Thanks to its easy operation and rapid setup, the machine is highly practical for the production of small batches. Equipped with assisted edge feeding and electronic speed control. Electronic temperature control and precise adhesive dosing. The adhesive container and edge guide are Teflon® coated for easy cleaning and maintenance. - Microprocessor-controlled temperature setting: 120° - 200°C - Speed adjustment directly on the handle - Adjustment possible during edge banding (ECO) - Sleep mode after 1 hour of inactivity - Teflon-coated glue pot - Special glue roller (polymer-coated) for processing 3D edges - Minimum edge thickness: 0.4 mm - Maximum edge thickness: 3 mm - Maximum edge height: 65 mm - Feed speed: 2, 4, 5, 6 m/min - Temperature range: 120° - 200°C - Glue pot capacity: 230 cm³ - Heating time: approx. 8 min - Voltage: 230 V, 50/60 Hz - Power: 830 W

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: Fgedpfxsx Aqbhe Aazsk O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1680 x 930 x 1200 mm Weight: 350 kg Total power requirement: 3.5 kW Edge Sanding Machine KSM-3000 ECO - Table size: 960 x 350 mm - Sanding belt height: 200 mm Fgedpfxevz Hn So Aazjk - Sanding belt dimensions: 3000 x 200 mm - Sanding belt backing plate: 1050 x 200 mm - Oscillation stroke: approx. 20 mm - Belt speed: 20 m/sec - Table lift: up to 230 mm - Oscillation motor output: 0.25 kW - Main motor output: 3.0 kW - Heavy-duty and premium quality construction - Veneer sanding device with fine adjustment, contact shoe, support rollers, and stops - Infeed fence with slots for veneer overhangs - Separate oscillation drive with geared motor - Extendable table width extension with multi-roller system, standard - Sanding unit infinitely tiltable up to 45° - Round sanding table as standard - Mitre stop with vernier angle scale - Spring-loaded belt tensioning, standard - Graphite-coated running surface - Extraction port: 100 mm - Includes sanding belt - Includes veneer sanding device - Includes mitre stop - Dimensions: L=1680, W=930, H=1200 mm - Net weight: 285 kg - Gross weight: 350 kg

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Fedpfx Ajidqpheazogk Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1720 x 760 x 1160 mm Weight: 230 kg Total power requirement: 3.5 kW Edge sanding machine KSM-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt backing plate: 850 x 200 mm - Belt speed: 20 m/sec. - Table lift up to 200 mm Fsdpfjvz Hnrsx Aazjgk - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Extraction port: 100 mm - Oscillation drive with geared motor - Height-adjustable cast iron table, double column guided - Double extraction system for main sanding unit and round sanding table - Sanding unit infinitely tiltable up to 45° - Graphite-coated running surface - Includes extendable table extension with multi-roller system - Includes mitre fence with scale - Includes sanding belt - Dimensions: L = 1720 mm, W = 760 mm, H = 1160 mm - Net weight: 180 kg - Gross weight: 230 kg

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) Fgodpfxjlikvho Aazjk X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 1320x700x1120 mm Weight 125 kg Total power requirement 1.5 kW Edge Sander KSM-2260 - Work table 810 x 180 mm - Table height adjustment 100 mm - Belt length 2260 mm - Belt width 150 mm - Sanding belt platen 770 x 170 mm - Sanding unit tiltable from 90° to 0° - Belt speed 16 m/sec. - Auxiliary table 290 x 265 mm - Speed 1420 rpm - Extraction port Ø 100 mm Fjdpfxsvz Hmze Aazogk - Motor output 1.5 HP / 400 V - Space requirement 1320 x 700 x 1120 mm - Weight 125 kg Complete with: - Mechanically oscillating sanding unit - Height-adjustable auxiliary table - Work table with integrated T-slot for miter gauge - Operator-friendly table height adjustment by handwheel - Spring-loaded belt tensioning, for automatic compensation of belt length differences - Infinitely tiltable sanding unit for vertical and horizontal sanding - Supplied as standard with rubber-coated sanding roller for internal and external sanding - Quick-release lever ensures easy belt replacement - Graphite covering on the sanding belt platen for improved belt glide - Base cabinet with tool compartment - Longitudinal fence - 1 sanding belt

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm Fjdpfx Aajnzhxqozogk - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Fsdpfx Aaop N D Ngjzogk Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Fgedpfxor Ttfle Aazok Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 Fgodpfx Aajv D U Urozek O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts Fsdpfx Ajwk Hp Toazogk - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Fjdpfx Ashvi E Isazjgk Polishing unit (2 x kW 0.25)

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Fgedpfxekt Uuas Aazsk Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Fjdpfouhv R Dox Aazjgk Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Fgodpfou Rc Ansx Aazsk Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Fgsdpfx Aou Rc Hyjazjk Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Fgsdpsi Hn Srefx Aazok Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Fjdpfeltmnlsx Aazsgk Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Fodpfsd Nt N Hex Aazsgk Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Fgedpfxjifnzds Aazek Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: zelo dobro (rabljeno), Single-sided Edge Bander (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 80 Edge thickness in strips/bands (min/max) mm: 0.4 / 20 Fjdpfx Aasl Iz Tujzjgk Control system: NC21 Feed speed m/min: 18 Top pressure: V-belt driven Adjustable fence: CNC-controlled Jointing milling unit: 2 x 3 kW Gluing unit (Hot Melt + Pre-melter): A20 + A34 Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment, chamfer/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profiling scraper unit Finishing unit (Flat scrapers + Buffing unit) FA 10